SPL REPAIR TO CERTAIN ROAD AT RAJPUT REGT CENTRE AND 114 INF BN (TA) JAT AT FATEHGARH CANTT

Amount

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom & finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc on black top surface complete all as specified and directed.

M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm after preparation of old surface complete all as specified and directed.

M&L for premix bituminous macadam (Design mix) (consolidated thicked 75 mm or less) with 4% binder content using paving bitumen VG-30 grade by weight of total mix laid and rolled and compacted to required camber and gradient with 8 to 10 tonne power road roller complete all as specified and directed. Note :- (a) Premix Bituminous macadam shall be obtained from hot mix plant and spreading shall be done with mechanical paver and asphaltic dense concrete work shall be done within 48 hours after completion of rolling and consolidation of bituminious macadam. (b) Contractor shall quote his rate on the basis of binder as mentioned in above item if there is any variation in the actual binder content used in lower side, the rate shall be adjusted @ Rs.45/Kg. However no price adjustment shall be made if the binder content works out to more than as specified above.

M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm complete all as specified and directed.

M&L for laying bituminous premix asphaltic semi dense concrete (Design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted @ Rs.45/Kg lower side of binder used. However no price adjustment shall be made if the binder content works out to more than as specified above.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a centre line or edge line etc road marking of 150/100 mm width using "HOT MARK" thermoplastic paint (hot application) white / yellow by indigenous modern propelled road marking machine as directed including all ingredients such as bider, glass beads, titanium dioxide, calcuim caronatre, inter filler ete thermoplastic requirement for glass beads shall be conforming to BS-6086 & MORTH specification including spraying of glass beads etc complete all as per manufacture's instruction complete all as specified and directed.

Supply and fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to IP 67) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency mono crystalline solar panel 2.4 V / 0.3 watt one Ni-mh or NI-cd rechargeable battery (1.2 V / 1600 MA) consisting of 06 Nos super bright LED with 10000 to 18000 mcd as per manufactures instructions complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model No.DA 972 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

-Ditto- all as per item No.9 above but 120 mm x 110 mm x 24 mm.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300 mm) type B-1 complete all as specified and directed.

S&F in repair plastic speed bump is designed so dynamically and compact that it can bear maximum load on it. The body of the running speed bump is made of PE material. Two highly reflective reflectors moulded in PMMA material are welded with PE base plate through ultrasonic welding process and then fixed on to the spped bump so that dust and water cannot touch reflectors inside area and thus it maintains its reflectively for a long time. it is available in yellow and balck colours. Diemensions Length 750 mm, Wdith 250 mm, Height 75 mm, weight and load capacity upto 100 tonne complete all as specified and directed.

Supply and fixing in repair convex mirror 80 cm in size out door purpose including MS stand / padestal embedded in PCC block 1:2:4 type B-1 (using 20 mm graded stone aggregate) size 45 x 45 x 60 cm and including necessary earth work & form work complete all as specified and directed.

Repair to potholes any depth, not exc. 1 sqm each incl sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by filling in screened & graded road metal watering and well ramming (including supply of road metal) complete all as specified and directed.

M/S MAMTA CONSTRUCTIONS (BID ID -3341213)

M/s M S Sharma and Co. (BID ID -3332530)

m/s meetu enterprises (BID ID -3341950)

Attar Singh and Sons (BID ID -3341029)