Mumbai Division (Suburban Section) - Provision of Escalators (15 Nos) at Grant Road (3), Mumbai Central (1), Lower Parel (2), Prabhadevi (1), Bandra (3), Khar Road (1), Jogeshwari (3), Malad (1). (Composite tender for Electrical and Civil work)

Item Breakup - C-All DSR-23 Items (Civil portion only)

pattern. Total 5303756.25

Item Breakup - D-All NS Items (Civil portion only)

Uncoursed hand-packed DRY RUBBLE FILLING cum (in work like rubble filling behind abutments etc.)without any special dressing of stones. Total 111240.00 Item- 2 10 mm thick polycarbonate sheet S No. Item No Description of Item Unit Qty Rate Amount

Supplying and fixing 10.00 mm thick multiwall Sqm Lexan easy clean clear Polycarbonate sheet of size 2.1 m x 11.8 m manufactured by GE Plastics India Pvt. Ltd. / similar with necessary fixing accessories such as EPDM E type 3legged gasket of A 65 shore hardness , Alloy steel Fastners with SDST screws of required size, EPDM bonded washer covered by Aluminum covered plates ,DC 995 Black structural sealent etc. including drilling holes to Aluminum section such as Profiled section for holding sheets, cover plate to cover the profiles to give a neet look, end closing profiles to close ends of the sheet. The rate excludes civil foundations and painting to structures . NOTE: - 1) The tenderer/er's have to visit the site of work with prior permission and appointment with concern IOW and ascertain the quantum of work before quoting the rates. 2) The work to be carried out approximate upto/ above 7.5 m height. 3) The rate shall be quoted including all labour, materials, cutting, erecting, assembling, tools and plants etc. complete. 4) Steel will be paid separately 5) The work to be carried out as per manufacturer's specifications. Total 1898100.00 Item- 3 flag stone 600 mm x600 mm S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ELECTRICAL/WESTERN RLY

Providing & fixing pavers (Flag Stone) of size Sqm 600 mm x300 mm or 600 mm x600 mm of 60mm thick, in Shot blasted finish with minimum average of 400 Kg/cm2 compressive strength at 28 days. Top layer will be around 8mm with tolerance (+ 2mm). Slab to be fixed on uniform bedding of 5 mm to 25mm thick fine sand and joints duly filled with sand. The rate includes all materials, labour, transportation, taxes, loading, unloading etc complete. Total 1593150.00 Item- 4 Turbo roof ventilator S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of turbo roof ventilators as per specification given below Turbine size :- 28 inch Neck size-21 inch No. of blades-36 vane Weight-6 kg Height-17 inches Base ring MOC- S.S Top plate-S.S/AI Vane blades-AI With matching FRP base plate 2mm thick which enables the fixing and installation of turbo roof ventilators. Total 78270.00

Item Breakup - E-All NS Items ( Dismantling of Steel- Civil portion only)

Dismantling steel from existing FOB/COP and MT staircase and taking away released scrap 24288.00 including labour, material, cranes, tools and plants, fuel etc. The work shall be carried out during traffic block including special mega block on Holiday/National Holiday. Rate shall be inclusive of hiring of cranes and other machineries, tools and plants, etc. required for dismantling, (Contractor has to deposit the amount with Railway and the dismantled steel will be contractor's property). Note:- Work shall be carried out with utmost care to avoid any damage to railway property and Work is to be carried out to dismantle COP without traffic block. Total -2914560.00

Design, manufacture, supply installation, testing & commissioning of passenger escalators as per RDSO specification no. RDSO/PE/SPEC/TL/0095 (REV '4') -2026 with latest amendment with all accessories and safety devices at various Railway stations of western Railway as per annexure attached. The standard vertical height of escalator is 6 mtr. The supplier shall be given +/- 0.6% quoted rate with variation of vertical height +/- 0.15 mtrs. Therefore if the height becomes 6.16 mtr, then the amount paid to bidder will be 1.006 times quoted rate and if height 1 becomes 5.85 mtrs, then amount paid will be 0.994 times quoted rate. Escalator shall be of State-of- the-art technology, having nominal step width of 1000mm, with 4 nos. horizontal Steps on top and bottom landing area and the nominal speed will be 0.5 m/sec., maximum carrying capacity will be 100 passengers per minute, angle of inclination of escalator shall be 30°. The escalator shall be complete with all parts and accessories, which are necessary for its efficient operation, whether specifically mentioned or not, Public announcement system, A CCTV system with at least two Bullet cameras with 4G Sim card with 03 years recharge, A microprocessor based monitoring and fault diagnostic system, and all safety features and shall fully comply with International Standard EN-115, IS-4591 latest version. Warrantee: 24 months with comprehensive maintenance & failure attendance. Detailed scope of work based on RDSO specs are enclosed in the Annexure I. Above/

B-Power Supply Portion: Provision of electric power supply arrangement

Supply of material and providing light/fan point wiring in PVC casing capping / PVC 1 conduit, as per site requirement, with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. with set of 3 wires for phase, neutral & earth and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I.

Supply of material and providing main/ submain wiring, in PVC casing capping / PVC 2 conduit, as per site requirement, with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm. with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. (Qty Unit - RM = (Running Meter)

Supply, fixing, testing & commissioning of MCB DB single phase with RCBO, m.s. enclosure, I/C-DP RCBO of 32Amp - 1No, O/G: SP MCB of 6A-25A - 4Nos, as per specifications in Annexure III.

Supply, fixing, testing & commissioning of MCB DB three phase with RCBO, in m.s. enclosure, out door type, I/C-FP RCBO of 63Amp - 1No and O/G: SP MCB of 10-32 Amp - 12Nos, as per specifications in Annexure IV.

Supply of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm (48") sweep, with down rod, and standard accessories, fan & regulator shall be compatible to work with various makes & models, as per specifications in Annexure V. (Minimum Warrantee - 2 years)

Fabrication, supply and fixing of MS clamps with MS hook made with MS rod of 12mm 6 dia., as per site requirement for installation of ceiling fans in covershed. The clamp shall be made from 30mm x 6mm MS flat in suitable shape, properly galvanized. The firm shall check the site for exact size & shape of clamps as per platform steel structure before fabrication and supply.

Supply, fixing, testing & commissioning of 5 step fan regulator electronic modular stepped type, compatible to work with various makes & models of BLDC ceiling fans: 1. Ceiling fan's 7 electronic modular stepped type regulator shall be of minimum 100 watts capacity suitable to work on 230 volts single phase AC supply. 2. Regulator should be compatible to work with various makes & models of BLDC ceiling fans. 3. Stepped regulator shall be fixed on modular board & connected with ceiling fan's piano controlling switch, shall be suitable for flush mounting on switch board, necessary internal wiring is included in the scope of work.

Supply, fixing, testing & commissioning of indoor type LED luminaires 20W (maximum, including driver), 4 ft long, System efficacy greater than or equal to 110 lm/W, Lumen 8 Output greater than or equal to 2000 lumens, Colour consistency CRI greater than or equal to 80, Driver Surge protection greater than or equal to 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaires complete with all accessories and other specifications as per Annexure VI. (Minimum Warrantee - 5 years)

Supply, fixing, testing & commissioning of outdoor type LED tube light luminaires 40W (maximum), 4 ft long, whether proof having IP 65/66 protection, System efficacy greater than 9 or equal to 110 lm/W, Lumen Output greater than or equal to 4000 lumens, Colour consistency CRI greater than or equal to 80. Driver Surge protection greater than or equal to 4KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). IK 08 protection for durability. Luminaires complete with all accessories and other specifications as per Annexure VI. (Minimum Warrantee - 5 years)

Supply of SMS alert device (4G) Kyatee make for escalator with web/ mobile application, as per specifications in Annexure VII. (Minimum Warrantee - 3 years) Square

Survey, design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. In case of double sided glow sign, the quantity will be counted as 1.3 times of the schedule quantity. Details as per specifications in Annexure VIII. Square

Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric 12 calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. In case of double sided glow sign, the quantity will be counted as 1.3 times of the schedule quantity. Details as per corresponding specifications in Annexure VIII.

Supply, fixing, testing and commissioning of 125A, 4 pole electronic / microprocessor 13 based MCCB, with inbuilt earth fault protection along with earth leackage protection having shunt coil, earth leackage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure IX.

Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 70 sq.mm.x 4 core, as per specifications in Annexure X.

Supply, fixing, testing & commissioning of aluminium lugs of size 70 sq.mm. for cable termination, as per specifications in Annexure XI.

Supply and fixing of flange type cable glands made out of brass castings, outdoor type suitable for armoured cables, gland size above 38 mm and upto 52 mm dia., as per specifications in Annexure XII.

Excavation of the cable trench in normal soil under rail/ road and refilling back the excavated earth, restoring /repairing of flooring after lying of cable, as per specifications in Annexure XIII.

Supply and erection of RCC hume pipe half round of size 150mm (6") dia x 1 mtr long, as per specifications in Annexure XIV.

Supply of material, fabrication of clamps of size 25x3 mm & clamping of cable as per specifications in Annexure XV.

Supply, fixing, testing & commissioning of colour coded 6 Nos x 25 sq.mm size hard 20 drawn solid aluminium aerial wires with nominal PVC insulation of 1.2mm, including 8 SWG earthing wire, M.S. clamps / bracket with shackle insulators at end points for drawing the aerial cables & M.S clamps/ brackets with bobbin insulators at middle points for supporting the aerial wires, as per specifications in Annexure XVI. (Qty Unit - RM = (Running Meter)

Dismantaling of electrical feed wires, light fittings, fans, relocation of cables, temporary lighting arrangement etc.as per specifications in Annexure XVII.

Supply of material & installation of maintenance free earth electrode of length 3 meter, including earth enhancement material for earthing for each electrode & other accessories as per Drg. No. SDO/ RDSO/ E&B/001 and RDSO Spec No. RDSO/SPN/197 /2008, as per Annexure XVIII.

Supply, fixing, testing & commissioning of G.I. strip 25mm x 6mm for earthing, including cutting, bending, welding, excavation etc., as per specifications in Annexure XIX. Above/

C-All DSR-23 Items (Civil portion only) 111403758.93 Below/P

D-All NS Items (Civil portion only) 3680760.00 Below/P

E-All NS Items ( Dismantling of Steel- Civil portion only) -2914560.00 Below/P

F-Preventive and Comprehensive Annual Maintenance Contract CAMC

First Year Comprehensive Annual Maintenance Contract CAMC out of 05 year contract of escalators.

Second Year Comprehensive Annual Maintenance Contract CAMC out of 05 year contract of escalators.

Third Year Comprehensive Annual Maintenance Contract CAMC out of 05 year contract of escalators.

Fourth Year Comprehensive Annual Maintenance Contract CAMC out of 05 year contract of escalators.

Fifth Year Comprehensive Annual Maintenance Contract CAMC out of 05 year contract of escalators.