Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
31 Jul 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ENGG
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- C-5:Any Civil Engineering Work / Zonal maintenance works.
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e OS/Tenders/Engg/SC Division) as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Annual Zonal Contract - Dharur (Excluding) to Wadi (Excluding) (for the Period 01.07.2026 to 30.06.2027).
111_W_SC_26_OT
111_W_SC_26_OT
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹2.1 L
31 Jul 2026
6 Jul 2026
17 Jul 2026
44 items across 1 schedule · ₹4,99,996.56 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Portland Cement (OPC-43 Grade) including all contractors labour, transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | MT | 1.00 | 5,900 | 5,900 |
| 2 | Supply of fine sand (Zone IV) including all contractors labour, transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | cum | 3.00 | 1,062 | 3,186 |
| 3 | Supply of F.P.S Bricks class designation 5.0 etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | 1000 Nos. | 1500.00 | 4,814.4 | 7,221.6 |
| 4 | Supply of Oxidised mild steel sliding door bolts 300 x 16mm etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 25.00 | 106.2 | 2,655 |
| 5 | Supply of Oxidised mild steel sliding door bolts 250 x 16mm etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 25.00 | 94.4 | 2,360 |
| 6 | Supply of Oxidised mild steel handles 125mm etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 50.00 | 23.6 | 1,180 |
| 7 | Supply of Oxidised mild steel tower bolts (barrel type) 200x10mm, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 25.00 | 40.12 | 1,003 |
| 8 | Supply of Oxidised mild steel screws 20mm, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | 100 Nos. | 2000.00 | 37.76 | 755.2 |
| 9 | Supply of Anodised Aluminium sliding door bolts 250x16mm, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 15.00 | 151.04 | 2,265.6 |
| 10 | Supply of Anodised Aluminium tower bolts (Barrel type) 100x10mm, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | 10 Nos. | 50.00 | 266.68 | 1,333.4 |
| 11 | Supply of Anodised Aluminium handles 125mm with plate 175x32mm, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | 10 Nos. | 50.00 | 382.32 | 1,911.6 |
| 12 | Supply of Anodised Aluminium handles 75mm with plate 125x32mm, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | 10 Nos. | 50.00 | 272.58 | 1,362.9 |
| 13 | Supply of White cement from reputed manufactures, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | MT | 0.50 | 13,216 | 6,608 |
| 14 | Supply of Bleaching Powder from reputed manufactures, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Quintal | 2.00 | 2,124 | 4,248 |
| 15 | Supply of Un-slaked lime, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Quintal | 10.00 | 354 | 3,540 |
| 16 | Supply of Fly proof SS wire mesh grade 304, 0.50mm etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Sqm | 268.00 | 487.34 | 1,30,607.12 |
| 17 | Supply of Nails 25-100mm long, etc with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Kg | 20.00 | 59 | 1,180 |
| 18 | Supply of Nails upto 25mm long, etc with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Kg | 20.00 | 53.1 | 1,062 |
| 19 | Supply of Float glass of nominal thickness 5mm etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Sqm | 10.00 | 607.7 | 6,077 |
| 20 | Supply of Glass sheet (Pin headed) 4mm thick., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Sqm | 25.00 | 407.1 | 10,177.5 |
| 21 | Supply of Ply wood 5 Ply with commercial ply on both faces 6mm thick etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Sqm | 20.00 | 361.08 | 7,221.6 |
| 22 | Supply of U-PVC pipes (working pressure 4 Kg/Cm2) single socketed pipe 75mm dia etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Metre | 180.00 | 82.6 | 14,868 |
| 23 | Supply of U-PVC pipes (working pressure 4 Kg/Cm2) single socketed pipe 110mm dia etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Metre | 10.00 | 153.4 | 1,534 |
| 24 | Supply of Second class teak wood in scantling etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | 10 cudm | 5.00 | 915.68 | 457.84 |
| 25 | Supply of White, vitreous china flat back wash basin 630 x 450mm etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 15.00 | 855.5 | 12,832.5 |
| 26 | Supply of Coloured (other than black) solid P.V.C seat in European W.C. Pan etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 20.00 | 413 | 8,260 |
| 27 | Supply of Semi rigid PVC waste pipe for sink and wash basin 32mm dia with length not less than 700mm i/c PVC waste fittings etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 150.00 | 29.5 | 4,425 |
| 28 | Supply of Semi rigid PVC waste pipe for sink and wash basin 40mm dia with length not less than 700mm i/c PVC waste fittings etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 20.00 | 38.94 | 778.8 |
| 29 | Supply of Stone Aggregate (single size) : 6mm nominal size, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | cum | 3.00 | 1,652 | 4,956 |
| 30 | Supply of Float glass panes of nominal thickness 4mm (weight not less than 10 Kg/Sqm) including, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Sqm | 20.00 | 364.62 | 7,292.4 |
| 31 | Supply of Float glass panes of nominal thickness 5mm (weight not less than 12.50 Kg/Sqm) including, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Sqm | 20.00 | 607.7 | 12,154 |
| 32 | Supply of Vitreous china pedestal for wash basin, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site | Each | 5.00 | 1,121 | 5,605 |
| 33 | Supply of Polyethylene water storage tank with cover and suitable locking arrangement, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Litre | 20000.00 | 7.2 | 1,44,000 |
| 34 | Supply of Un-plastic PVC connection pipe with brass union 45cm long 15mm bore, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 100.00 | 41.3 | 4,130 |
| 35 | Supply of Flushing cistern PVC 10 lts capacity low level white with fittings and accessories and flush pipe, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 10.00 | 678.5 | 6,785 |
| 36 | Supply of White plastic WC seat (solid) with lid C.P. brass hinges and rubber buffers etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 10.00 | 483.8 | 4,838 |
| 37 | Supply of H.P or L.P ball valve with polythene floats : 20mm dia etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 25.00 | 283.2 | 7,080 |
| 38 | Supply of H.P or L.P ball valve with polythene floats: 15mm dia etc., with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 20.00 | 253.7 | 5,074 |
| 39 | Supply of Gunmetal non-return valve -horizontal (screw end) 25mm dia including, with all contractors transportation, lead and lift, taxes, stacking at desired locations etc., as per the direction of Engineer-in-charge at site. | Each | 10.00 | 413 | 4,130 |
| 40 | Supply of Brass full way valve with CI wheel (Screwed end) 25 mm dia with all contractor's transportation, lead & list, Taxes ,stacking at desired location etc as per directed by the Engineer in charge at site. | Each | 15.00 | 442.5 | 6,637.5 |
| 41 | Supply of 20 mm dia Gunmetal gate valve with wheel of desired brand/make with all contractor's transportation, lead & list, Taxes ,stacking at desired location etc as per directed by the Engineer in charge at site | Each | 10.00 | 383.5 | 3,835 |
| 42 | Supply of 15mm PTMT Push cock long body with flange with all contractor's transportation, lead & list, Taxes ,stacking at desired location etc as per directed by the Engineer in charge at site. | Each | 200.00 | 64.9 | 12,980 |
| 43 | Supply of 15mm PTMT Bib cock long body with flange with all contractor's transportation, lead & list, Taxes ,stacking at desired location etc as per directed by the Engineer in charge at site. | Each | 201.00 | 118 | 23,718 |
| 44 | Supply of 15mm PTMT Stop cock with all contractor's transportation, lead & list, Taxes, stacking at desired location etc as per directed by the Engineer in charge at site. | Each | 25.00 | 70.8 | 1,770 |
| Schedule total | ₹4,99,996.56 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderScheduleTDUsection.pdf
ATTACHMENT
Annexure-ISupplyItems.pdf
ATTACHMENT
Mastertenderbooklet2ason26.03.2026.pdf
ATTACHMENT
Mastertenderbooklet1ason26.03.2026.pdf
ATTACHMENT
master building conditions
ATTACHMENT
STCablecondiditionsF.pdf
ATTACHMENT
MasterDocumentforSpecialConditionsforcontractsforCivil-Buildingworks-Correctedon10.03.2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .