PROCUREMENT OF TOOLS AND TACKLES FOR ELECTRICAL DEPARTMENT

Discharge rod with cable (for HT 11 kV & LT 415 V),Material : FRP Pultruded,Type of Product : Highly Insulated FRPTelescopic Earth /Discharge Rod,Model No. :11-33KV,Assembled Length :15 feet,Total Section of eachrod :3 Section

Safety belts ,Industrial SafetyBelts and Harnesses Class A andClass D and Class E and Class L andClass P,BIS Certifi cation :Yes,Material of Webbing Polyester,clause7.1 of IS 3521 shall be provided

LT hand gloves (of 415V) ,Gloves forElectrical Purposes Type 2 (Guuntlettype) For use at Voltge notexceeding 1100V, AC rms,Composition :Synthetic Rubber,Rubber Gloves, ElectricalPurposes conforming to-IS:4770:1991 latest,Minimum internal lengthfrom the tip of thesecond finger to the edgeof the cuff shall be (mm):400

HT/LT hand gloves (of 11kV ),Rubber Gloves for ElectricalPurposes Type 4 (Guuntlet type) Foruse at Voltge not exceeding 17000V,AC rms,Composition :Mixture of Naturaland Synthetic rubber,Rubber Gloves, ElectricalPurposes conforming to-IS:4770:1991 latest,Size of Gloves (as perAnnexure-A ofIS:4770:1991 latest)-9,Construction:Latex,Minimum internal lengthfrom the tip of thesecond fi nger to the edgeof the cuff shall be (inmm):280 for wrist type

Box spanner set (12.7mm ratchet) , Sockets size from 8 to 32mm with accessiories, Blow moulding box

Box spanner (6.25 mm ratchet) , Socket size- 4 mm to 14 mm with socket accessiories set

Ring spanner set (6mm to 36mm) , chrome plated

Tubular spanner 10,11,12,15,16,19,20,24,25,26mm etc. , with tommy bar

D-spanner (6mm to 32mm) , Double ended spanner, chrome plated

Allen key set (1.5 to 19mm) Black Finish

Files-flat file ,FL1502, second cut, , 2nd cut

Files-flat file ,FL2002, second cut, , 2nd cut

Triangular files 3SQ1003,

Triangular files 3SQ1503,

Round files ,RD2501 ,

Round files ,RD1501,

Screw driver complete range , Insulated, , From blade length 125 to 250 mm & Blade diameter 3.5mm to 10 mm

Scre driver sets in box , square poker, Philip-1

Combination pliers , isnulated with thick C.A sleeve , length 210 mm,

Long Nose pliers , insulated with thic C.A Sleve,

EVEREADY LED1 Torch 3cell, DL-63 Non-Rechargeable Torch (Silver), Dia of light 50 -75 mm, Small size

EVEREADY LED1 Torch 2 cell, DL-63 Non-Rechargeable Torch (Silver), Dia of light 50 -75 mm

Hack saw with blades ,

Crimping tool (0.5sqmm- 16 sqmm) ,Hand operated heavy duty Rachet type crimping tool to crimp non insulated terminal end for 0.5 sq.mm to 16 sq.mm , Alloy steel material ,

Crimping tool , Hydraulic compression light weight heavy duty tools , 25 sq.mm to 400 sq.mm ,with Dies- H25 to H400(11 sets), Maximum stroke- 32mm, Compression force - 16 metric ton, Operating pressure- 10,000psi to 700 kg/sqmm, with Hand pump ,

Cantilever Tool Box , 5 compartments, CTB1805, LxWxH- 450x200x205

Air blower, Bosch makes,Phase:Single Phase,Frequency:50 Hertz,No Load Speed, RPM:16000,Air Volume:3.8 m3/min,Voltage:235 Volt,Power Consumption:620 Watt

Industrial vacuum cleaner, Airfl ow rate (ltrs/Sec) :53 ,Suction Hose length :2 meter,Floor Nozzle size :50 millimeterTypes of Cleaning operation :Wet and Dry DutyCleaning Container Capacity :30 liter,Warranty :1 year, Vacuume level,230 millibar,Airfl ow rate (ltrs/Sec)-53,Suction Hose length-2 meter,Floor Nozzle size-50 millimeter Power Supply-230 + 10 % VAC, Single Phase, 50 +/- 2 % HZ Rated input powerduring operation-1.25 kiloWatt,Power Cord Length 10 meter, Number of Motors-1,Power of Each Motors-1000 Watt,RPM-20000, Types of Cleaningoperation-Wet and Dry Duty CleaningOverall Dimension(LXWXH)- 43*43*80, Material Of the Body &Container Stainless Steel,Container Capacity-30 liter,Material of Flexible HoseNylon,-Noise Level-62 decibel,Packing list Nozzles,pipe &horse

Portable welding machine ,Type of welding machine-Portable Inverter type,Number of phase: Single, Input power capacity :7 KVA, Input voltage frequencyin :50HZ,No load voltage in Volts-62, Output current range:20-200A,Duty cycle in Percentage:60 Efficiency:85%

Hand drill machine with different sizes bits , cordless brushless electric drill, chunk size-3/8, cordless, Chuck Type :,Keyless,Motor Type : Brushless Power Rating : 0 Watt, Maximum Speed (RPM) :1500 RPM,Battery Type : Lithion Ion (Li-ion) Variable speed :Yes,Conforming Standardsand Certifi cations :EN/DIN/US/UL/CSA or equivalent standards and certifi cations,Height:2 inch,Width:2 inch,Drilling Capacity in Steel:10 millimeter Length of Drill bits:1 inch,Depth:2 inch,Warranty:1 year

Hand gloves for battery maintenance ,Rubberised Hand Gloves,Additional Requirements : Anti-slip PVC PolkaDots for good grip, 32-40 per sq. inch. Thepolka dots on gloves are sufficiently raised and uniformly placed on,Technical specifi cation ofthe product Industrial Safety Gloves as per BIS Specifi cation No IS : 6994 ( Part 1) - 1973,amds 2

Supply extension boards with RCCB & 10 meter cable

Slide wrench (6 inch, 12 inch )

Filler strip (0.02mm –0 .3mm) ,Measuring Range 300 mm Material SS,Number Of Blades 26 Color: Silver,Thickness 0.5 mm

Utility Knife ,Taparia make,Product no: UK-2 ,Blade width:19mm

Wire stripper pliers,product id:WS06, ,length :150mm

Nylon hammer , soft faced hammer with handle,SFH-50, IS10838-19884

Scissors ,Handle Material :Plastic,Blade Length (mm) :5 millimeter Overall Length (mm) :200,Material of Blade -Stainless Steel, Blade thickness-2.5

Vernier Calipers (300mm) ,insize Graduated Scale for Vernier /Dial type Calipers Display Calipers,insize (1205-3002S),Jaw Type : Type A - With jaws onboth sides for externaland internalmeasurements. Provided with blade for depthmeasurement:Yes,Provided with Step-MeasuringFaces:Yes External Measurement Range(mm):0-300,Caliper Type-Vernier Calipers,Minimum IDMeasurement:0 millimeter,Least Count/ Resolution:0.02 millimeter,Accuracy (Maximumerror in reading) at 20deg C (±): 0.03 millimeter,Jaw Length:27.5 millimeter,Length of Faces (Knifeedge ) for Internalmeasurement:22 millimeter

Hammer (5 & 10 pound),Taparia T50 ball pein hammer with Wood,Handle 800 Grams,Taparia,Grade of Material (Steel):T50 Handles Requirement-Yes,Material of Handles:Wood,Name of the-wood/Timber-TEAK Length Of the Handles (inmm)-110 millimeter,Conformity to IndianStandard-IS 841:1983

Drill Bit 3 to 12 mm,HSS Metal Drill Bit Set 12 (Drill Bit Sets-IS 5102 , IS 5101, IS 5103),Set Type :Metal Drill Bit Set Drill Bit Type :Twist Drill Bit,Set Contents : HSS Metal Drill Bits No. of Pieces in the Set : 12 Maximum Size :13 mm,Hardness of CuttingPortion in HV (Measuredon Land ):760-900 HV

Battery operated box spanner kit,Bosch Cordless Brushless Impact Wrench 1/2 inch Drive,Bosch(GDX 18 V-EC),Torque Output, Min (Ft-lb) :120 Drive (inch) :1/2,Battery Voltage : 18 Volt,Weight with Battery -Tolerance 5%, in lb:2,Length - Tolerance 5% :6.3 inch Blows Per Minute (BPM) :3000,- Tolerance 5%:10.2 inch,Free Speed(RPM):2500,Torque Output, Min (Ft-lb) 120,Drive (inch):1/2,Battery Voltage:18 Volt ,Weight with Battery Tolerance 5%, in lb:2,Battery Type:Lithium,Battery Capacity , Ah,min 4 Battery Charger:Dual bay,Charge Time, Max:55minute,Warranty (min) 1: year

Hot blower,Bosch Coiled Wire Hot Air Gun,Bosch(Bosch GHG 20-63),Temprature setting:3 Stage,Max Temperature:630 degree Celsius,Min Temperature:50 degree Celsius,Air Flow(L/Min):150-500,Cord Length:2.5 meter,Air Volume(Cfm):5,Current, Amp:7.5,Power Input:2000Watt,Supply Voltage, Volt:240VAC,Heating Element Material Coiled Wire,Width:86 millimeter,Weight:650 gram,Length:245 millimeter,Nozzle Size:25 millimeter,Height:201 millimeter,Warranty 1 years

Heater/Halogen for motor/Generator heating ,BAJAJ 1x400W as per Cl.2.11 ofIS:13383 (Part 3):1992 latest(Symmetric 1 Plane):BAJAJ (BJFL 400W SV/MH Complete Set),Luminaire system rating:1x400W,Each Luminaire suitablefor:Single HPSV Lamps,Type of lamp with eachluminaire:1 x 400 W Tubular, 230 V, 50 Hz, AC,Rated luminous flux of each lamp (Lumens):42300 for 400 W HPSV lamps,Type of Control Gear foreach luminaire,Non Integral. Single Box housing - With 1 No. of Ballast, 1 Nos. of Igniter, 1 No.ofcapacitor and 1 No.of Control fuse etc., Luminaire suitable foroperating voltage at 230 V, +/-5%, 1 Phase, 50 Hz, AC,Power factor≥ 0.85,Type of Ballast Copper wound, 400 W, 230 V, 50 Hz, AC, PF: > 0.85 , Energy effi cient, Watt LossMax 38 W,Other components foreach control gear/luminaire:Capacitor, 230 V, 42 mfd, prewired,Igniter, 3 wire, 230 V,Housing material Die cast aluminium alloy Minimum thickness ofhousing material (in mm):2.5,Minimum thickness ofreflector material (inmm) - Must declare:0.5,Heat resistant SafetyGlass (ProtectiveGlassCover),Toughened Glass, 4 mm thick Luminaire fitted withGasket,Yes with Neoprene rubber Material for all theHardware items exposedoutside Stainless steel Material for all theHardware items usedinside of luminaire Mild steel Zinc coated passivated,Each Luminaire providedwith Sturdy clamp

24 VHand Lamp,Die Cast Aluminum LED HandLamp 7 Watt(6-9 WATT LED HAND LAMP FITTINGSUITABLE FOR OPERATION ON 24 VOLTAC SUPPLY),Lighting Type :LED,Warranty,years :2,Max Diameter (mm) 80-90 Max Height (mm)-40-60,Cable Size (m):0.5,On and Off Switch:YesLED Life (hours):upto 30,000,IP Protection:IP-60,Maximum OperatingTemperature(C ):45 degree Celsius,Frequency Range (Hz):50-60 Total PowerConsumption:7 Watt,Power Supply:AC,Cable Included:Yes,Power factor>0.9

24 V DC transformers ,5 kVA Hand Lamp Transformer, Portable, OutputVoltage: 24v Ac Dc,Power:5 kVA,Phase,Single Phase,Enclosure MS

Silastic Dispenser,SKF Lever type with screw downfollower Grease Gun SKF (TLGH 1IN),Type of Grease Gun :Lever type withscrew down follower,Warranty in years :1,Nominal capacity of thegrease gun in cm3: 400 for Lever type,Discharge per stroke in cm3 :1 for Lever type,MinimumOperating/discharge pressurein kgf/cm2:300 for Lever type,Material for Grease gun:Steel,Dimensions of Greaseguns (L x W x H ) in mm xmm x mm:350x58x300,Overall Weight of Greaseguns in gram:1500

Grease gun (grease EP2, EP3),1 Kg,Type of Grease Gun :Lever type withscrew down follower,Warranty in years :1,Nominal capacity of thegrease gun in cm3: 150 for Push type,Discharge per stroke in cm3 :0.4 for Push type MinimumOperating/discharge pressurein kgf/cm2:200 for Push, MAke- SKF , Quantity of Grease:500-1Kg,Dimensions of Greaseguns (L x W x H ) in mm xmm x mm:280x110x50,Conformity to Standards IS : 7794 - 1984

10Kg Hydrolic type Grease Gun,Lever type with screw downfollower Grease Gun,Nominal capacity of thegrease gun in cm3:400 for Lever type Discharge per stroke in cm3 :1 for Lever type,MinimumOperating/discharge pressurein kgf/cm2:300 for Lever type,Conformity to StandardsIS : 7794 - 1984,Material for Grease gun Steel,Nominal capacity of thegrease gun in cm3:400 for Lever type,Discharge per stroke incm3:1 for Lever type,Maximum overall,lengthin fully charged conditionin mm:750 for Lever type MinimumOperating/dischargepressure in kgf/cm2:300 for Lever type Grease guns surface finish:Painted,Overall Weight of Greaseguns in gram: 10000

Lockers 12 Compartment Steel Clothes Locker, M.S sheetconforming tocommercial quality CR-1,Grade 340 of IS513:2008, Sheet thickness of body -0.8 mm , No. of compartment- 12, Locks- internal locks with key , Sheet thickness for door- 0.8 mm , handle- Electroplated mild steel handle ,Height of dressersWithout pedestal in mm(±5 mm)-2000 Width of dressers in mm(±5 mm)-910,Depth of dressers -(±5 mm)-550 Stiff ened Pedestal heightin mm (±5 mm)-125,Packing Corrugated Paper Packing-Paint,Stove enameled-Colour-Ash Gray, Warranty Period-1 year

Double 1 Inch Jaw Lockout Hasp,Material :Stainless steel,Jaw Type :Double,Jaw size, inch :1,Thickness :18-20,Length, mm :105-110,Breadth, mm :30-35ISO Certified :Yes,Warranty :1 year,No of holes:6,Red,Hasp Style,Scissor Action:Jaw Type:Double

Electrical LOTO lock,Loto OSHA Safety Share,Padlock with Long Shackle and Different Key,Item Dimensions LxWxH:13 x 4 x 2 Centimeters,Locking Mechanism:Key Lock,Material Acrylonitrile Butadiene Styrene,Color- Red,Long Shackle - 2 Keys Per Lock

Electrical Tag lock,Cution Tags,Do Not Operate Tags, Red color,Primary material Plastic, Tag with Electrical Description, Electrical Danger Sign

Square Mild Steel Collapsible Road Barricade,Side Structure of Pipe- Square,Overall Height at Close ( In MM )-900,Overall Height at Open ( In MM )-900,Length after opening ( In MM )-2500,Length after collapse ( In MM )-250,Diamension Of side structure of pipe ( In MM )-40 x 40 square,Thickness of side structure of pipe ( In MM )-2.0,Thickness of Movable flate strip(in mm)-4,Length of Movable flate strip(in mm)-550 Width of Movable flate strip(in mm)-22,Diameter of wheel 50,Coating Synthetic Enamel Paint

Tool Bag Nylon,Closing type:Zipper,Shape:Rectangular Type With pockets,Number of pockets (internal , external ):8,Waterproof:Yes Trolly included:No,Body Material,Nylon,Height:240 mm,Length:600 mm,Width:225 mm,Warranty:6

Kamtron Systems Pvt Ltd.