Tender for Irrigation Pipeline in this Institute at ICAR-CICR, Panjari, Khapri Phata, Wardha road Nagpur

Amount

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note : (1) Excess/less cement used than specified in this item is payable/ recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 80 mm dia nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 80 mm dia nominal bore.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete.50 to 80 mm nominal bore

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90°(For 80 mm outer dia pipe)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 75 mm dia 17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket.

Providing and fixing of 3 " G.I. HOSE NIPPLE

Providing and fixing 5 HP Open well Sub-merssible motor pump etc. complete. (make :CRI)

Providing and fixing Starter (DOL) With reputed brand

Providing and fixing Cable ( 3 core 4 square mm water Proof cable) With reputed brand

Providing and fixing Rope

Providing and fixing 3" HDPE pipe motor pump to well With reputed brand

Miscellaneous items for fitting (Like elbows, clamps, nut-bolds etc.)

SARANG JAYNARAYAN DHANOLE

Rida enterprises

Mahendra N Kamble

DINESH GOPALDAS MANTRI