Rail renewal for 26 Track Kms (TKM) length with 52 kg 260m rail panels at identified stretches under Senior Regional Engineer, Ratnagiri section from Km 0/800 to 378/100 in Maharashtra state. (Computer no.69832 Rate quoted shall be excluding GST. GST shall be payable as applicable)

A-Cutting of rails, dismantling and removal of existing 52 kg rails and

Dismantling and removing the existing 52 kg rail panel upto a length of 260 mtr. with fittings and fastening and keeping away from the site of work without causing any infringement to the railway track as directed by engineer-in-Charge or his representative and laying newly prepared rail panel, interchanging rails east to west as needed including removing the elastic rail clips, inserts and liner seat on rail, liners, rubber pads and refixing elastic rail clips etc. including aligning, levelling and correcting the gauge in traffic block conditions, to keep rail panel at nominated location after dismantling with all lead and lift etc. complete as directed by Engineer-in-Charge (All labours and tools to be supplied by the tenderer/contractor only at his own cost) including greasing of pandrol clips 2 inside portion of inserts and proper seating of MS/SF liners, GR pads on the rail. (Note : Payment of this item shall be made per Rmt. of newly laid rail panel which includes dismantling of existing rail panel and after replacing the same as TRR.)Dismantling and removing the existing 52 kg rail panel upto a length of 260 mtr. with fittings and fastening and keeping away from the site of work without causing any infringement to the railway track as directed by engineer-in-Charge or his representative and laying newly prepared rail panel, interchanging rails east to west as needed including removing the elastic rail clips, inserts and liner seat on rail, liners, rubber pads and refixing elastic rail clips etc. including aligning, levelling and correcting the gauge in traffic block conditions, to keep rail panel at nominated location after dismantling with all lead and lift etc. complete as directed by Engineer-in- Charge (All labours and tools to be supplied by the tenderer/contractor only at his own cost) including greasing of pandrol clips inside portion of inserts and proper seating of MS/SF liners, GR pads on the rail.

Transportation of welded panels upto 260m in length by dragging on contractor's rollers placed on cess with all contractor's labours, tools and plants, equipments etc. complete as directed by Engineer-in-Charge. Unit Above/

B-Loading, leading and unloading of released P way materials (Item rate is

C-Loading, leading and unloading of released Pway materials by road

Loading and transportation of released rails/ points& crossing rails/ PSC sleepers from the location as directed Engineer in charge by road vehicle with contractor's own vehicle, loading , unloading and stacking properly with contractoor's own labours tools plats etc complete as per direction of Engineer in Charge. Lead upto 25 km and all lifts. Note: This item will be operated only if 1 the item under Schedule A1 for loading , leading unloading with dip lorry is not been operated.Loading and transportation of released rails/ points& crossing rails/ PSC sleepers from the location as directed Engineer in charge by road vehicle with contractor's own vehicle, loading , unloading and stacking properly with contractor's own labours tools plats etc complete as per direction of Engineer in Charge. Lead upto 25 km and all lifts. Note: This item will be operated only if the item under Schedule B for loading , leading unloading with dip lorry is not been operated. Unit Above/

D-Unloading of all types of rails (item rate is excluding GST) 71606.53 Below/Pa

Unloading of all type of rails of length 130 metre and beyond from end unloading rake 1 and keep the panels in head-up position at specified distance from centre of track clear from any infringement. Note: Contractor has to keep Oxygen and Acetylene gas with cutter as standby during the period of work. 171071 During period of traffic block Unit Above/

E-Anti corrosive painting of rails (Item rate is excluding GST) 1744351.74 Below/Pa

Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane 1 with two coats of thickness of 100 microns each with Contractor's bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM. 137012 For 52 kg rails Unit Above/

F-Removal and shifting of speed restriction boards (Item rate is excluding

Manual shifting for 1.5 km.lead on either side of the speed restriction location and fixing of speed restriction boards (one set consisting of 8 nos) in midsection as per the distance given in para 807 and 808 of IRPWM

Removing and manual shifting of speed restriction boards (one set consisting of 8 nos. boards) in mid section with 1.5 km lead on either side of speed restriction location as directed by Engineer-in-charge with all contractor's labour, equipment etc.

Supply of competent look out men for various works as per requirement by Engineer-in- charge Unit Above/

G-Supplying of Alumino Thermic Welding portions (Item rate is excluding

Manufacturing and Supply of Alumino thermic welding portions of 52Kg/60 Kg/60EI- R260 as approved by RDSO for welding of rails 52Kg/60Kg/60EI-R260 kg for 25mm gap by the process of AT welding along with complete accessories confirming to the specification laid down in Indian 1 Railway Standard specification No.IRST-19-2020 up to date correction slips with Single shot crucible fitted with Automatic Tapping Thimble, 3 pieces pre fabricated mould (Zircon washed) manually pressed using compressed air petrol/LPG pre heating for execution of welding of rail joint as directed by the engineer in charge at site. Note: 1. The accessories along with welding portion shall be supplied as per Annexure-I of the IRUSSOR - 2021. 2. Rate is inclusive of transportation of above to SSE/P.Way stores 091012 For 52 kg 90 UTS Rails

25mm gap 'in-situ' welding during traffic block and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by 2 Engineer in charge.Note: 1. Welding shall be carried out only by trained welder having valid competency certificate using RDSO approved Alumino Thermit Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED) manually pressed, Single shot crucible fitted with auto tapping thimble and Compressed Air Petrol/LPG preheating technique as per RDSO Specification No IRST/19-2020 with latest amendment. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing.3. Only required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. All other items required shall be supplied by the Contractor 092013 For 52 kg rails Unit Above/

H-Pairing of rails (Item rate is excluding GST) 505370.88 Below/Pa

Pairing of 10/20 rails panel unloaded in block section accurately within all lead and crossing lines if necessary with all contractors tools, plants etc as directed by Engineer-in-charge Unit Above/

I-Drilling and chamfering of holes (Item rate is excluding GST) 34174.32 Below/Pa

Drilling and Chamfering of holes in 52/60 kg /90 R rails to correct spacing and size in running track in order to fix fish bolt and nuts with all lead and lift etc complete as directed by Engineer in charge (All labour, tools and plants drilling equipments and other consumable stores are to be 1 supplied by contractor at his own cost) a) 16 mm to 19 mm dia for OHEDrilling and Chamfering of holes in 52/60 kg /90 R rails to correct spacing and size in running track in order to fix fish bolt and nuts with all lead and lift etc complete as directed by Engineer in charge (All labour, tools and plants drilling equipments and other consumable stores are to be supplied by contractor at his own cost) a) 16 mm to 19 mm dia for OHE Unit Above/

J-Removing and refixing of existing RE mast bonds (Item rate is excluding

Removing and re fixing of existing RE mast bonds after permitting by power block or by 1 permitting by TRD staff to facilitate track maintenance work like CSM/UNIMAT Tamping, BCM working destressing, replacement of rails, screening of ballast, FRM working, BRM working etc with all contractor's tools, equipments and plants, labout etc complete, including keeping in safe custody of released fastenings of bond to refix the bond after completion of track work and ensuring safety of trains, with all lead and lifts, as per instruction of engineer- in- charge(Note: Missing of any fastening will be recouped by contractor at his cost) Unit Above/

K-Miscellaneous items of USSOR 2022 (Item rate is excluding GST) 1017062.85 Below/Pa

Drilling holes of specified size for bond holes with 7.2mm dia drill twist to correct spacing and location on 60kg/52kg rails on cess or under traffic block with contractors tools and plant, 1 equipment, consumable, labour etc complete as directed by the Engineer in charge at site.Drilling holes of specified size for bond holes with 7.2mm dia drill twist to correct spacing and location on 60kg/52kg rails on cess or under traffic block with contractors tools and plant, equipment, consumable, labour etc complete as directed by the Engineer in charge at site.

1720240 Loading , leading and unloading of all types of Pway fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJ's and glued joints by road 3 vehicles for different leads. Note : Lead shall be the shortest motorable road length between the points of loading and unloading. The lead for Loading, leading and unloading of all types of Pway fittings, payment will be done as per the rate for particular slab shown in Item no.3 of Schedule K. There will be no add on in the rate of previous slab.

Lubrication of Elastic Rail Clips on PSC sleepers with contractor's grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM.

Hiring of machinery for minor miscellaneous works for short duration including 6 operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

welded panels upto 260 m length (Item rate is excluding GST)

Item- 1 Cutting/End cropping of 52 Kg rails.

S No. Item Description of Item Unit Qty Rate Amount

1 1 In situ with contractor's abrasive rail cutting machine Each 450.00 346.00 155700.00

in block condition with all contractor's tools & plants, Cut

manpower, consumable items, fuel etc. including

transportation of the same in midsection and as

directed by Engineer-in-Charge. (Note : This item(a) to

be operated & paid only if small track cutting machine

is used for cutting in block condition like partner

cutting machine or its equivalent as approved by

2 2 For cutting LWR panels/free rails to make cut rails of Each 250.00 53.00 13250.00

suitable length on cess using hacksaw blade with all Cut

contractor's materials, tools & plants, consumables,

manpower including transportation of the same in mid

sections etc. Complete.

Schedule Schedule B-Loading, leading and unloading of released P way materials (Item rate is excluding GST)

171040 Loading , Unloading and hauling of 52 KG/60 Kg Rails more than 13 metre and up to 39 metre

Item- 1 length by Railway's Rail Dolly/Dip Lorry to to the nominated location under traffic and line protection in

case road carriage is not possible for different leads and lift up to 5 metre.

S No. Item Description of Item Unit Qty Rate Amount

3 171043 Extra to item no 171042 for lead beyond 1 KM for every MT 100.00 81.85 8185.00

subsequent Km or part thereof and up to 10 km.

Schedule Schedule K-Miscellaneous items of USSOR 2022 (Item rate is excluding GST)

1720240 Loading , leading and unloading of all types of Pway fittings and all other miscellaneous

material except Rails, sleepers, switches, crossings, SEJ's and glued joints by road vehicles for

different leads. Note : Lead shall be the shortest motorable road length between the points of loading

and unloading. The lead for Loading, leading and unloading of all types of Pway fittings, payment will

be done as per the rate for particular slab shown in Item no.3 of Schedule K. There will be no add on in

the rate of previous slab.

S No. Item Description of Item Unit Qty Rate Amount

Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel,

Item- 6 lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and

regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

S No. Item Description of Item Unit Qty Rate Amount

1 211201 JCB Backhoe Loaders 3DX Plus or similar with minimum Hour 100.00 752.64 75264.00

1.10 cum bucket capacity

2 211202 Hydra or similar tyre mounted Pick-n-Carry crane of Hour 50.00 889.42 44471.00

12T capacity for misc. works of handling of material

3 211203 Tractor with Trolley for local transportation or other Hour 10.00 199.17 1991.70