Budgetary Quotation for Construction of South Gate complex at JNPA.

Amount

WORK STATION - L1050/1200W600H750 Providing and fixing in place 600mm deep running counter made of Plywood with post form edge profile for 25mm thick table top consisting of a drawer pedestal of size 450mm x 500mm x 500mm & 400mm high Modesty partition with key board, CPU trolley for every 900mm of length and all the necessary hardwares etc. complete. All the exposed surfaces to be finished with 1.0mm thick laminate. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980) - Without Alumnium Partition

Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM:-Tile based Aluminum partition system of 1800/1200mm ht.made of 60 mm thk aluminum frames having two separate raceways for laying electrical & computer wiring.The wire management shall be throught otheraceway to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easy access of wires.Frames to be joined by aluminum connectors with M6 x 16 pan- head machine screw and washer with aluminum post cover.Post cover of snap on fashion to be connected on aluminum connectors .All visible aluminium to be in anodized finish.The top/exposed sides of the frame and posts should be covered with horizontal/Vertical trim and caps made of Aluminumin anodized finish in order to enhance its look.Upper tiles of partition to be in Soft Board or Marker tile of 9 mm .thk.,and plywood lower tiles in laminate finish of 9mm.thk.on both the sides.

Excutive table 2100 X 900 X 750 MM Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

Excutive table 1800 X 700 X 750 MM Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

CONCIERGE DESK :- Size of 1950 x 600 x 1050 mm Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

Conference Table -Oval Shape (4000 L to 1510 x 750mm ht.) Providing and fixing in place, table comprising of 25mm thick table top made of calibrated plywood. All edges to be finished with 2 mm thick edgeband Rehau make with machined pressed and finished. Complete structure to be made of calibrated plywood all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing, fixing, jointing and testing, PN10 conforming to 1703 GM ball valves screwed end with SS lever operated of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by Engineer-in-charge for water supply lines of the following nominal bore (NB) size:

20mm dia

25mm dia

Supplying & fixing Auto Air vent with in-built ball valve for water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.

a) Air release valve size- 20mm

Supplying, fixing in position approved make PN16 GM non-return valve conforming to IS 778 with unions etc., complete.

40 mm dia

Supplying, installing and commissioning approved make Bronze Y type strainer screwed with necessary nuts and bolts, neoprene rubber gaskets, flanges, etc.., complete.

50 mm dia

Supplying, fixing and testing PP multi floor trap with water seal of 50 mm deep with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with heavy duty type etc., complete.. (For hand wash & dish wash area)

Supplying, fixing and testing PP P-trap with brass CP frame and threaded cover (150mm x 150mm). Trap of 100mm dia. Inlet and 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. (The frame & grating)

Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. RCC slabs - Depth of Slabs between 200mm to 300mm

a) 51mm dia upto 110 mm dia pipe

b) 111mm dia. upto 160 mm dia pipe

b) 160mm dia. upto 200 mm dia pipe

Supplying, fixing and testing PVC P-trap with brass CP frame and threaded cover (150mm x 150mm). Trap of 100mm dia. Inlet and 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. (The frame & grating)

Design, Supply, Installation and Testing of Sewage Treatment Plant of Commission 25 KLD with Commissioning Including of 5-10mm Spacing SS Bars, 1665 FRP Vessel Top Opening, Protected Surface Area450m2 Specific Gravity 0.9 MOC Virgin PP, 750 MM V shape Black, MOC Virgin PP, Pipes and Fittings (MS and cPVC) pipe, 1.5 m3/Hr., 15 M Head, Submersible Sewagepumps, 1.0 m3/Hr., 10 M Head,Self Priming Pumps, 1.5m3/Hr., 35 M Head Filter Feed Pumps, Air Blowers with a lot of Diffusers 50m3/Hr., 4000 MMWG Head, Motor as drive for blowers 1440 RPM, 3 Phase, 40 RPM, 0.5 kw 0.75HP Agitator, 6 LPH, 240 V, Single Phase pump with 40 Ltr chemical-storage, Control Panel & Cable.

Supply of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be factory assembled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficient scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigerant piping. Units shall be tested and commissioned with additional refrigerant.

Unit Capacity

VRF Indoor units

Ceiling mounted 4 way compact cassette unit

1.0TR - 4-Way Cassette

1.6TR - 4-Way Cassette

Ceiling mounted 4 way cassette unit

2.0TR - 4-Way Cassette

2.6TR - 4-Way Cassette

3.2TR - 4-Way Cassette

Wall mounted hi-wall unit for vrf system

1.6TR - Hi-Wall

HI-WALL SPLIT AC INVERTER

1.6TR - Hi-Wall SPLIT AC -5 Star Inverter

2.0TR - Hi-Wall SPLIT AC -5 Star Inverter

Installation, of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be Including rubber pads for outdoor units etc.

Unit Capacity

Pressure testing and Refrigerant Gas charging between indoor & outdoor units.

Unit Capacity

Fabrication and installation of MS base frame for outdoor units complete with epoxy painting, vibration isolation pads, supports, hangers, brackets etc for ODU unit

VRF ODU

Split Unit ODU

SITC of Under deck insulation with 25mm closed cell with all joints taped with 60mm self adhesive tape. Class 'O' insulation. Insulation shall have factory applied aluminium foil facing

Supply Installation & Testing of Control Cabling from indoor to outdoor unit.

2C X 1.5 Sqmm Cu sheilded cable

4C x 2.5Sqmm CU Flexible cable

Supply, Installation & Testing of power cabling from Indoor unit to supply point.

3C x 2.5 Sqmm CU flexible Cable

Supply, Installation & Testing of power cabling from Outdoor unit to supply point.

4C x 10Sqmm copper Armoured cable

Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for all machines. 40mm Dia

Automatic duct flow controller for fresh air supply to cassette

Aluminium powder coated Exhaust Air Grille/ disc valve

Supply, Installation, Testing & Commissioning of Exhaust & Fresh Air Fan

150cfm / 10mm SP - Fans

300cfm / 10mm SP - Fans

500cfm / 15mm SP - Fans

600cfm / 15mm SP - Fans

Deisgning, Supplying, Transporting to project site, Installing the Main Panel on a suitable MS fabricated stand 300mm above the floor level in approved manner, fixing of all the switchgear, controlgear and instrumentation using all the accessoires, proper termination, wiring with suitable size lugs, testing and successful commisioning. The components and the protection type are as below as per SLD- 1. IP43, 16SWG - Overall, 14SWG - Gland plates, Top entry 2. Powder coated - RAL7310 3. Base frame - 100mm C channel 4. Incomer - ATS - 160A 5. Outgoing - 100A, 63A, 80A etc feeders 6. SPD for the Main Incomer and AC Feeder

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 30mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 100mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 300mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way SPN DB with 25A/32A/63A DP RCCB as 30mA incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.

Supplying, transporting to project site, installing and commissioning of 63A, FP, MCCB,10 KA in sheet metal enclosure.(Make- Legrand or equivalent )

CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.

3.5C X 150 Sqmm. A2XFY Cable

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.

3.5C X 150 Sqmm. A2XFY Cable

SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

2 Nos of 6A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate.

1 Nos of 6A 5-pin sockets and 1 Nos 6A SP switch in suitable backbox along with front plate.

1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

1 Nos of USB Socket and 1 Nos 6A SP switch in suitable backbox along with front plate.

Supply, Installation & Commissioning of following lighting fixtures with required material including necessary accessories, wiring connection, chain, down drops, supports etc.(Make - Wipro, Havells, Legero 0r Equivalent)

15 W Recess Mounted Down light

9 W Recess Mounted Down light IP 65

41 W Recess Mounted Down light IP 65

40 Watt Surface / Pendent Mounted LED Batten Fixture IP65

LED Strips 5watt/mtr with 25watt Driver.

Supply & installation of 25W bollards.

BLDC Ceiling fan, 26 watt to 30 watt, 1200 mm sweep, energy efficient Sweep, with regulator and remote control, suitable for single phase, 230V, 50Hz, A.C. supply operation complete with accessories such as 15" long down rod, canopies,

SITC of Supplying and erecting Exhaust fan medium duty 230 V A.C. 50cycles 225 mm. 1400RPM with condensor complete erected in positionwith necessary materials. Fanmotor with moisture proof treatment and‘E’ class insulation and marking Sr. No. & date of erction.with Louvers to be erected in the aluminium frame.

Supply,Installation,Testing & commissioning of 9M Height Street Light Pole with singe arm without light fixture

Supply & installation of 120W LED flood light

Supply, Installation, laying & terminating of GI Trunking 200X75

Supply, Installation, laying & terminating of GI Trunking 100X50

Providing & Fixing 2mm thick SS cover plates. Cover plates shall be champhered at all edges

250mm X 250mm X 2mm for tile mounting.

Supply, Installation, laying & terminating of 25mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Supply, Installation, laying & terminating of 32mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Providing & fixing of Readymade Polycorbonate unbreakable Junction box with 15A, 4way connectors and knowout for 4 cable entry of following size.

100 x 100 x 50mm.IP65

150 x 150 x 50mm. IP65

300 x 300 x 50mm. IP65

Earthing using maintenance free earth electrode with chemical treatment 3mtr. Long, inner pipe dia 40mm & outer pipe dia 80mm, Including boring of hole upto 6.5 mtrs. in all types of strata as required. The electrode shall be electrolytic grade GI tube pre-filled with hygroscopic powder and low resistive backfill material. (Earth Resistance value shall be achieved to less than 2 ohm)

Earthing using Maintenance free earth electrode with chemical treatment, 3mtr long, 32mm dia. high tensile, low carbon steel circular rod with molecularly bonded Copper of thickness 250 Micron on outer surface, 50x6mm Cu earthing strip from electrode terminal upto disconnecting link in chamber at top etc. Scope includes boring hole upto 6.5 mtrs in all types of strata as required.

Supply, fixing / placing of PVC pipe of 150mm dia.as casing to the earthing pit only for filling portion to retain surrounding soil. (Casing shall remain permanent for this filling area.)

Additional cost of Concrete inspection chamber with heavy duty concrete cover in lieu of brick masonary chamber & C.I. cover. Concrete chamber & cover shall be suitable for movement area / roads.

Supply, tagging, laying or fixing, testing of GI / CU earthing strip / wire in ground at a depth of 600mm including excavation in all type of strata except hard rock or in readymade trenches with necessary clamps, revette jointing as per specification complete as required.

32mm x 6mm thick GI strip.

25mm x 6 mm thick GI strip.

25 mm x 6 mm thick. Cu strip.

25mm x 3 mm GI Strip down conductor mounted on porcelain insulator for Lightning Arrestor.

Supply and installation of earth busbar box consisting of 50 x 6 mm, 300mm long GI. Strip with multiple tapping and nut bolt arrangements etc. mounted on SMC insulators. Box shall be fabricated from M.S. sheet including powder coated, clear acrylic hinged door etc. complete.

Supply,Installation, testing & commissioning of 3Phase Input & 3Phase Output UPS with 30 minutes Battery back up and sealed maintenance free lead acid maintained in battery racks complete with interconnections, Cu battery cables, Battery breakers. The rack shall be sturdy M.S. section fabricated with powder coating The scope shall include terminals & busbar shrouding for Battery terminals & connections. (Note:- Battery store shall start 150mm above FFL.)

1 No. x 30kVA UPS arrangement as per given specifications and details.

Supply, Installation of Sealed maintenance free valve regulated lead acid (VRLA) Battery (with reverse polarity protection MCCB) as per specifications complete suitable for following UPS sizes (Bidder should furnish the battery calculations for 30 minutes backup along with the BOQ). Note: The scope also includes complete SITC of cables, DCDBs, DC MCBs, required for battery interconnection as well as interconnections betwwen batteries and UPS with required all accessories.

30 KVA UPS (30 minutes).

Installation of battery rack floor mounting as per specifications with necessary fabrication complete for following sizes.

30 KVA UPS (30 minutes).

Supply, Transporation, Unloading at site , Installation , Testing and Commissioning of 'Silent Type' Diesel Generating set (outdoor type) with AMF Function having Power rating of ____ KVA, 415 Volts at 1500 RPM 0.8 Lagging power factor, consiting of the followings. The scope also includes the exhaust piping with Al cladding / insulation including the support structure of exhaust pipe as per CPCB norms & also obtaining approval /Permission from CPCB/Goverment electrical Inspector, Local Muncipal authority etc. DG set also iclude the fuel piping, First charging of Dry Batteries & First fill of Labrication oil. Diesel Engine: Diesel Engine: 4 stroke radiator cooled type with necessary fan, electric start with Electronic Governer, of suitable BHP at 1500RPM suitable for ____ KVA output of alternator at 45 degree C ,90% RH & 550 Meter MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continious operation. The engine will be fitted complete with all the required accessories.The scope includes testing of engine. Alternator : Alternator rated at ____KVA, 415 Volts 50Hz at 1500 RPM,3 phase 50 Hz, AC supply with 0.8 lagging power factor at 45 degree C,90%RH & at 550 meter MSL. The alternator shall be SPDP enclosure, brushless, continious duty, self excited and self regulated through AVR confirming to IS 4722/BS2613 suitable for tropical conditions and with class F/H Insulation. The scope also includes required control cables between D.G. set to AMF panel to complete the works including required routine test at manufactures works & site test as per specifications. Adopter Box for cable termination with extension bus bars for termination suitable for Armoured cable power cables.

160 KVA D.G. Set with acoustic canopy, battery, AVM & 990Litre diesel tank etc.

LIFT WORK

10 Passenger/680 Kgs – 03 Stops – MRL Type Elevator Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off)

Supply, installation, testing of set of Bulkhead fixture with 9 W LED or wattage as per lift vendor and 1 No. 5A, 3 pin socket + switch on common good quality board in lift pit.

Supply, fixing, testing, of good quality industrial interlocked switched sockets with MCB's of different ratings in readymade IP 65 Polycabonate unbreakable enclosure. Box should be suitable to terminate cables / wires easily, complete as required.

20A 1Ø, 3Pin Socket and plug with 20A SP MCB in a Readymade Box.

40/63 A 4 Pole RCCB 100mA + 25A DP MCB in single readymade box for lift machine room.

Supply, installation of material equipment required as per statutorial provision & safety.

1.1 kV class Handgloves pair.

Laminated First aid chart with frame.

First aid box.

High Voltage Electrical Insulation Synthetic Mats, ISI Marked,confirming to IS:15652-2006. Types: Class C; for 1100V, Flame Retardant, Shock Proof, 1000 mm in width, pastable, Acid/Alkali/Diesel/Oil Resistant, CPRI/ERDA tested & Approved, Black/Gray in color etc.

415V Dangerboards of appropriate size & marking.

Supply, Laying, termination & Commissioning of fully loaded patch panel.

Supply, Installation, Testing & Commissioning of Power Cable 3 C x 2.5 Sq. mm Armoured

Supply, Installation, Testing & Commissioning of 40mm HDPE pipe

Supply, Installation, Testing & Commissioning of walk through metal detector with cemera & superimposed data on video - 106F. Alarm - Acoustic and Optical alarm, height onperson bar display (Metal Locator), Metal Level Display - 12 LED based bar graph is provided in the console to display volume of the metal carried in GREEN, 2 Signal Processing - Microcontroller based with I2C interface,

Supply, Installation, Testing & Commissioning of Micro Controller Based with Standalone DVR + 1 TB HDD + 18.5 inch Monitor for walk through metal detector.

Supply, Installation, Testing & Commissioning of Ladies Frisking Booth. Diamention - Lenght-4ft 4 inch, Height - 6.5 ft, Width- 4ft 4 inch, Mild steel with powder coating material.

Supply, Installation, Testing & Commissioning of Padestrian Swing Barrier (Single Lane) with SS 304 Grade Cabinet - Matt finish with 520 mm passage, DC brushless Motor, & Acrylic flap + Safety Sensor Lane indicator on Top Cabinet With Tailgating feature

Supply, Installation, Testing & Commissioning of elescopic Boom Barrier length- 6mtrs, Operation time : 6 Sec, Drive : Electro-Mechanical, including Remote, Push Button, Pair of Photo Sensor, Base Plate, Boom & Boom Rest

Supply, Installation, Testing & Commissioning of Hand Held Metal Detector With Dry & Rechargeable battery & Charger

Supply, Installation, Testing & Commissioning of Red / Green LED Signages with installation bracket etc

CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.

2C X 2.5 Sqmm. YY Cable

4C X 2.5 Sqmm. YY Cable

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.

2C X 2.5 Sqmm. YY Cable

4C X 2.5 Sqmm. YY Cable

Supply, installation, testing & commissioning of the following items as mentioned below inlcuding necessary accessories as requires: Make: Kidde, Tyco, UTC, Siemens

Seamless cylinder of 80 Ltrs capctiy to store Sapphire Gas along with necessary MS painted stand & wall fixing bracket as requires to install the cylinder (Main Cylinder)

Novec 1230 Fluid factory

Electrical Actuator cum conventional fire alarm panel with a set of 6 nos. different type of detectors with cabling works, necessary terminal blocks, fire alarm with cross zoning funcion with built-in delay timer, Actuator should be capable to accept the signal from building Main Fire alarm panel.

Manual Release / Abort stations along with back box & necessary glass on top

Flase light fixture indicates in Bold Capital letters "DO NOT ENTRE" / "EVACUATE", price should be inclusive of necessary lamp & fixing bracket as requires.

Discharge Nozzles of 3600 50mm dia

Electrical actuator panel suitable to accept signal from Main fire alarm.

Manifold with necessary male female connectors.

Flexible hose lines with necessary couplers (Male / female)

Pressure Switch

Piping,Fitting for 80 Ltrs with all ACCESSORIES

Seamless MS painted Piping, fittings & supports, etc.Price should be inclusive of all necessary fixing accessories, joints, bends, couplers, paintaings as requires. Make: Jindal/Tata

32 mm dia.

Supply, installation, testing & commissioning of the Ultrasonic repellent system comprisies of following Make: C-System, Maser

Master consol for generating high frequency sound waves i.e. 20KHz to 50KHz as requres with adjustable nobe, power supply card etc.

Satellites connected with each master consol

2 core x 1.5 Sqmm FRLS PVC Copper cable existing in conduit along with all accessories.

Hooter

Supplying, installing, testing and commissioning of Water leak detection control panel of 4 zone type consisting with features like, Auxiliary alarm contacts, Monitored alarm outputs,Open & short circuit line monitoring, Bright LED's for indication. Panel shall have lockable enclosure. The panel shall work on 230v AC & also should have built in battery back up.The panel shall have accept / reset / aknowkedge buttons and it shall be wall mounted type.

Supplying, installing, testing and commissioning of Electronic Hooter for water sensing indication.

Water leak sensing cable twisted of 15 mts. long, mechanically strong, resistant to corrosion and abrasion. The cable shall be constructed with two sensing wires,an alarm signaling wire and an continuity wire and all shall be in a fluoropolymer carrier ( OR equi. material).The cable shall have factory installed connectors that can help to plug other cable together for extension. The cable shall be rugged in construction, no metal exposes, enables it to be reusable even in corrosive environment. Quoted price shall inclusive of all fixing accessories, end caps and probes (if required).

Supply, installation, testing and commissioning of followings: System shall be BMS compatible for remote monitoring Make : VESDA, Honeywell, Schrack Seconet

VESDA Laser Compact (VLC 800)

Power Supply Unit for above Detection system

Aspiration Tubes

Capillary Tubes

Air Termination (Nozzles)

Electronic Hooter

Supplying, installing, testing and commissioning approved make 16 SWG MS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.

25 mm dia.

S/I/T/C of Electric Motor Driven Fire Pump set of 1600 LPM @ 56 m head, with Bronze Impeller, Motor, Coupling, Base Plate and foundation bolts matching flanges with gasket and fastners wth all complete.

S/I/T/C of Diesel Engine Driven Fire Pump set of 1600 LPM @ 56 Mtr head with Bronze Impeller, Engine, Base plate, coupling with coupling guard, foundation bolts, automatic air release valve, fuel tank with engine exhaust line silencer, matching flanges with gasket and fastners and battery with battery charger including 100% standby

Supply and installation of Ceiling mounted, self activated FE-36 type, 10 kgs capacity Fire Extinguisher with self spary sprinker, fixed with pressure discharge horn, wall brackets or floor MS support complete with necessary mounting base.

Supply, installation, Testing & commissioning of LED Fire exit sinages os per design & Drawing or as per direction by Engineer In Charge Make - Prolight or Equivalent

Entrance Gate Branding 3D Signage : Prototyping supply installation & commissioning letters made of 18 gauge thick S.S.316 material laser cut out with 75mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment , front side attached 3mm thick 040 acrylic laser cutout letters with male female fitting .all letter polish & rose colour PU coated as per your requirment.Letter bottam side attached 5mm S.S. laser cut PU coated plate for fitting arrangment.All letter inside samsung moduler LED Light for glow.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed

Entry Gate Logo : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Size: 36"Ø

Latter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size: 4.4"

Latter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size: 6.25"

Entry Gate Logo: Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Size: 60"Ø

Latter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size : 7.8"

Latter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size : 7.6"

Parabolic Signage : Design, Manufacture,display,Installation of hanging type LED Illuminited sign/Direction board in Parabolic & Eliptical (half ,semi & full) shape.Aluminium Alloy (6063-T6) extruded Anodised profile use for outer & nylon bracket for internal structure holding & heatsinks fitting. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2mm/3mm thickness. The text/ Graphics matter visibility shall not be less than 160˚. The approved colour text and graphics shall be printed/router cut on monomeric calendered vinyl of 70μm thickness and shall be firmly pasted on display sheets. Provision for 24 x 24mm aluminium profile attachment for bottam hanging & top side Tie arrangment. .The signage shall have the integal mounting arrangments with strudy structural frame & ACP Cladding on the backside of signage to avoid rusting and entry of dust.The LED Board shall have25x 26mm heat sinks with multiangle attachment for LED & for nylon bracket. Uniform illumination with 4-8W/Sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5mm thick S.S 304 should be provided.

M/s. PAINTERIOR PROTECTIVE SYSTEMS LLP (BID ID -3169371)

Design Edge Studio (BID ID -3169440)