Development of Rock Top including surrounding garden area at Jallandhar Beach and modification/merging of rooms at Ghoghla Circuit House. (3rd Call)

Civil Works :

Providing and laying vitrified of full body floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Color design and pattern given by consultant. With specific colour which matching with kotastone Size 600mm x 600mm

Providing and fixing White stone bela masonry block in course in foundation and plinth with stone of approved quality in cement mortar1:5 ( 1 Cement: 5 course Sand) include the packing the joints complete. The drawing is to be referred for further details and as directed by EIC.

Providing 20 mm thick cement plaster in single coat on single or half brick walls for interior plastering up to floor teo levels and finishing even and smooth in cement mortar 1:3 (1- cements:3 sand

Providing and laying cements concrete work 1:2:4 (1 cements: 2 coarse sand : 4 graded stone aggregates 20 m nominal size) and curing complate exculiding cost of formwork in (A) Foundation and plinth ( up to 10 ton).

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet , 10" SQUARE RAIN SHOWERHEAD KATAYST SPRAY, Code: 18361IN-CP and 5"CEILING MOUNT SHOWER ARM, Code: 11623IN-CP, Make: Kohler.

Providing and Installation,testing and commissioning of bath area single lever divertor, including with all internal cp plante, fixures, 15 mm dia C.P. concealed divertor, with wall operating knob complete in all respects.Model AQUA TURBO 360 MANUAL HIGH FLOW VALVE, Code: 99924IN-CP, Make: Kohler

Providing and Installation,testing and commissioning of 15 mm dia C.P. Staright BATH SPOUT WITHOUT DIVETER, Code: 37344IN-CP, Make: Kohler

Providing and Installation,testing and commissioning of 15 mm dia C.P. Staright wall mounted basin mixer trim, Code: 20739IN-4ND-CP, VERSATILE CONCEALED INWALL VALVE, Code: 5679IN-CP, Make: Kohler

Providing and fixing wash basin including drain cuplin and bottl trapof kohler make of MODERNLIFE BASIN, GRID DRAIN, Code: 45432IN-CP,Bottle trap with 350 mm extension pipe, Code: 75823 IN-CP, Code: 77762T-0.Make: Kohler

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China Pattern :(i) in white colour . Make of Kohler brand , TRACE True Rimless wallhung with Ultra thin seat cover, Code: 20217IN-S-0, Make: Kohler

Providing and fixing consiled cistern with dual flushing system, including all fittings and fixtures including cistern fittings, nuts, bots and gasket, top cromium plate, etc including making connection complete in all respect as per directions of Engineer-in-Charge. Make of kohler brand , IN WALL TANK( MECHNICAL), Code: P77027IN-MNA,BEVEL FACEPLATE POLISHED CHROME, Code: 8857IN-M-CP, CONNECTOR ACCESSORY PACK, Code: 1046327-S, , Make: Kohler.

Providing and fixing health faucet with connection to angle valve complete in all respects. ELATE HEALTH FAUCET WITH HOSE AND BRACKET, Code: 97258IN-CP, Make: Kohler

Providing and laying Vitrified tiles of size1200x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Supplying and stacking of good earth(averge 60 cm filling) at site including royalty and carriage complete (earth measured in stacks will be reduced bv 10% for payment)

Providing and laying hand dressed Rajula Stones (200 mm x 130 mm x 50mm) over 1:3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average 1” thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, cleaning etc. complete at all levels and heights. (the rate shall be for the patterns and details provided by the Architect.)

Providing and laying leather/river polish Rajula Stones (200 mm x 200 mm x 25mm) over 1:3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average 1” thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, cleaning etc. complete at all levels and heights. (the rate shall be for the patterns and details provided by the Architect. If required, residues will be provided and no extra amount will be paid for residues to be used to achieve the pattern).

Providing and fixing white coloured two track sliding upvc window complete. Consisting of upvc frame of size 60mm x 59mm four side mitre cut fussion welded corner joint out of frame and sash 65mm x42mm 4 side mitre cut fussion welded corner and 10mm clear tafen glass and bead section 18mm x20mm two shutter cross interlock 42x38mm , provide hardware accesories as roller and handle and 1.2 mm thick g.i.section reinforcement whereever required produced by iso 9001 : 2015 and iso 14001:2015 and OHSAS 18001:2007 and BIFMA , CE, GREEN , ASSURED GREEN BUSSINESS certified company eplast build techno industries UPVC window systems . including with supply, fabrication, installation as directed by the engineer incharge

Providing and fixing white coloured Fix UPVC window complete. Consisting of upvc frame of size 58mm x 52mm x 2.2mm four side mitre cut fussion welded corner joint out of frame four side mitre cut fussion welded corner and 10mm clear tughen glass provide al type hardware accesories and 1.5 mm thick g.i.section reinforcement whereever required produced by iso 9001 : 2015 and iso 14001:2015 and OHSAS 18001:2007 and, GREEN envirenment , certified company eplast build techno industries llp as GERMAN brand KOMMERLING UPVC window systems . including with supply, fabrication, installation as directed by the engineer incharge

Providing and fixing white coloured fix upvc window for ventilation complete Consisting of upvc frame of size 60mm x 59mm four side mitre cut fussion welded corner joint out of frame and sash 65mm x42mm 4 side mitre cut fussion welded corner and 10mm clear toughned glass and bead section 18mm x20mm , 1.2 mm thick g.i.section reinforcement whereever required produced by iso 9001 : 2015 and iso 14001:2015 and OHSAS 18001:2007 and BIFMA , CE, GREEN , ASSURED GREEN BUSSINESS certified company eplast build techno industries UPVC window systems . including with supply, fabrication, installation as directed by the engineer incharge

Demolition of brick work and stone masonary including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift (i) cement mortar

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Make: jaquare

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore , Make: jaquare

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan with integral type. Make: cera

Providing and fixing health faucet with connection to angle valve complete in all respects. ELATE HEALTH FAUCET WITH HOSE AND BRACKET , Make: jaquare

Angular cock with flange Providing, fixing and testing and commissioning of 15mm CP brass angle valve with CP copper connecting pipe 375 mm long along with nuts, washer and brass flange complete as per drawing and details

Pillar cock with flange Providing, fixing and testing and commissioning of 15mm CP brass angle valve with CP copper connecting pipe 375 mm long along with nuts, washer and brass flange complete as per drawing and details

Supplying & Growing of Carpet lawn at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

supplying and lying of high density polythylene 100mm dia HDPE pipe at ugwt jallandhar circuit house.

supplying and erecting submercible motor pump of 3 H.P. ( three phase) for supply of water from under ground water tank to o.h.w.t with all feetings , nuts, screw,etc completed

providing and fixing water tank door made of galvenized iorn coated MS steel of size 900mm * 900mm (having weight of 12 kg) with suitable framing ,lock ,nuts, screw, etc complete as directed.

Providing and fixing teak wood flooring of 0.150m * 0.050 size and 1.8m. length including cutting ,jointing with nuts screw etc completed as per direction of EI.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics .CCT-3000K,CRI>80, Beam angle-175 Degree ,Luminous Flux -258LM, IP54,120 to 300 V,Power Factor more than 0.9, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % LED Light / Spot Light (b) LED Spot Light 3 Watt, Surge -4KV (including GST)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics. CCT-3000K,CRI>80, Beam angle-175 Degree ,Luminous Flux -258LM, IP54,120 to 300 V,Power Factor more than 0.9, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % LED Light / Henging Light (b) LED Henging Light 6 Watt, Surge -4KV (including GST)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics. CCT-3000K,CRI>80, Beam angle-175 Degree ,Luminous Flux -258LM, IP54,120 to 300 V,Power Factor more than 0.9, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % LED Light / Reading/Bed Light (b) LED Bed Light 10 Watt, Surge -4KV (including GST)

Supplying and erecting horizontal / vertical mounting type storage water heater / Electric Geyser with copper container housed in M.S./S.S. body insulated with glass wool / puff complete with heating elements,adjustable thermostats 300 c to 850 C, indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation. Electric Geyser 15 Ltr-.with 2 /3K.W. heating element

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics .CCT-3000K,CRI>80, Beam angle-175 Degree ,Luminous Flux -258LM, IP54,120 to 300 V,Power Factor more than 0.9, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % LED Light / Spot Light (b) LED Spot Light 7 Watt, Surge -4KV (including GST)

Fabricated work: Providing Fabrication & erection of steel structure as per drawings including materials, consisting of plates, rolled steel joists, channels, angles, chequered plates etc and also rectangular / square hollow steel sections, insert plates in RCC/Brickwork, anchor bolts for steel structure, sleeve pipes, anchor nuts, washers etc, straightening of raw steel if required, fabrication of steel structures with primer and minimum two coats of anti corrosive paint, incuding Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. including preparation of supplementary sketches and detailed bill of materials supply of bolts, nuts, washers, shims, packs, putty. gas, welding electrodes and all other consumables, as required and carrying out surface preparation all complete. The scope includes loading, transportation ,unloading and delivery and erection site of all fabricated structures, alignment and welding of all structures true to line, level, plumb and dimension, including rectification if any, splicing, site assembly all as per technical specifications and drawings, ,all complete . Contactor shall provide certificate for the fabrication structure. Rate inclusive of shop drawing.

Glass Fiber Reinforced Concrete (GRC) Panel: Supply and Fixing of Glass Fiber Reinforced Concrete (GRC) Panels of approved size, thickness, design and shade as per Drawings and Technical Data Sheet, glass fibre shall be an alkali-resistant, continuous filament fibre developed and formulated specifically to have high strength retention in Ordinary Portland Cement environments. The glass fibre shall have a minimum ZrO2 content of 16% by weight, in accordance with internationally-recognised standards, and shall have a minimum strength retention (determined by Strand In Cement-SIC testing) of 300 MPa, along with OPC, Sand (having high Silica Content, white & in equal mess sizes), Water, Admixtures, Polymers, Additives and Pigments (if required) conforming to BS 1014, pigment being harmless to the GRC’s set and strength, stable at high temperature. and UV-resistant and alkali-resistant, panels are manufactured by a spray technique and to be formed of GRC in moulds to achieve the profiles indicated by the architectural drawings (If an architectural face mix is being used, this will first be sprayed into the mould. The thickness shall generally be the minimum possible to achieve the desired finish, which will normally make it at least 20% thicker than the largest sand or aggregate being used and normally 4 mm minimum and 12 mm maximum thickness. An acrylic polymer should be used in the face mix to reduce any risk of this unreinforced layer cracking, If no face mix is being used, a mist coat consisting of the basic mortar composition without fibre may, if necessary, be sprayed onto the moulds to prevent fibres from being visible on the finished surface of the product), minimum thickness of panels recommended as 8 mm for hand-spray and 6 mm for auto-spray, but the actual thickness shall be as per drawing only (control of thickness shall be achieved by using a pingauge or other acceptable method), inserts, if required, shall be properly embedded into thickened, homogeneous areas of GRC (waste material such as over-spray is not acceptable to encapsulate inserts or for bonding pads), any rigid embedded items bonded to the GRC shall not create undesirable restraint to volume changes, including chamfering of edges to the required groove size as per architectural features, packing, transport to site, storage, stacking and fixing of the panels at any level, making good of minor chippings/ cracks in panels (GRC will be repaired with MS Rod, if necessary and rectified materials shall be strong enough to withstand. Any major damage in panels shall be cause for rejection of the same and free replacement shall be done as per discretion of the engineer-in-charge without any extra cost), all complete as per drawings, specifications and direction of the EIC. (R.A.)

CPVC Pipe SDR 13.5 - 20 mm daimeter .

CPVC Pipe SDR 13.5 - 40 mm daimeter .

PVC SWR Nani Trap IS 14735 for Drain 100 mm dia with jali.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness. (upto 10 ton)

Providing anf fixing multicell polycarbonate sheet of minimum thickness 10 mm with 3 cell 4 wall having wall flenge and supporting wall thickness as per manufaturer specification extruded translucent panel with vertical standing seam at both side of ther panel with snap on connector to intyerlock the panels with a single/double tooth greep/lock mechanisum to ensure maximum uplift capacity including end cap/ alluminium U profile (Mill finish) for end panel shall be coexetruded both side UV protected with antiglare colour to Prevent glare. The panel shall be fixed to pre installed structural MS frame work (MS structure shall be paid saperatly in relavent Item) and be secured with snap on connector at all level including all accesaries like screw, washer , flashing, trims etc.. complete as desired including transportation lift scaffloding etc.conforming to specification and direction of Engg. In charge.

Supply & Installing of SUPERSIL make Galvanized Steel U Shape 50*25*50mm panels with 50 mm clear gap(Centre to Centre 75mm)Wooden Powder Coated on Single visible Surface of Panels and Supporting Structure Black Spray Painted type Cladding System

Supply, Unloading, Shifting at site, installation, testing and commissioning of as per specification of Sf6 Insulated RMU , 3 way , 11 KV, Outdoor 21KA/ 3 Sec, Outdoor use, Manual Operated, ,630A, 1 No Air Break Switch as a Inomer + 2 Outgoing VCB , Breaker with Self powered Relay for protection Overload and Earth fault ( 50/51N)., Earth Switch , Mechanical ON/OFF/Earth indication, Voltage Presence Indicator, Cable Boot Make Schneider,C&S,ABB

Supply, Installation, Testing & Commissioning of PTZ Camera 1/2.8” 2Megapixel STARVIS™ CMOS· Powerful 30x optical zoom· Starlight technology· Max. 50/60fps@1080P· Auto-tracking and IVS· IR distance up to 200m· Support PoE+· IP67, IK10 Make UNV,Honeywell,Hi-Focus,Hochiki,Apollo

Supply, Installation, Testing & Commissioning of IP IR Vari Focal 2MP IR Mini-Bullet Network Camera,1/2.7” 2Megapixel progressive CMOS· H.265+ & H.265 dual-stream encoding· 25/30fps@1080P(1920×1080)· DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC· Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS· 2.8~12mm varifocal lens· Max IR LEDs Length 40m· Micro SD card memory, IP67, PoE Make UNV,Honeywell,Hi-Focus,Hochiki,Apollo

Finishing MS with weather proof exterior Oil paint on steel surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6 Make Finolex,D-link,Polycab

Krishna Buildspace Pvt.Ltd.