SMART PERIODICAL SERVICES TO INTERNAL AND EXTERNAL OF WARDS/ OPDs OF BLDG P-105 ADC RR UNDER GE E/M RR HOSP. DELHI CANTT-10

M&L for Preparation of old plain/rough cast surfaces plastered or unplastered /rough cast sufaces including taking down old paint and applying one coat of weather proof exterior paint on walls/ceiling with 1.00 to 1.50 mm thick exterior wall care putty on walls/cieiling complete finished even and smooth,through mechanical means complete all as specified and directed. Note-water proof cement based putty @1kg (undiluted) per sqm of average thickness 2mm over the plastered /old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mecghanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface . Step 1: Mix the putty powder by adding water as manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine/manully of putty application finishing the surface even and smooth in level without any undulations. Step 3: Allow 6-8 hrs time to dry the putty surface Note for item No 01 to 09:- Applied rates for above items also include necessary scaffolding, jhulla, tools, plants and safety equipments & measures to carry out the works upto a height of G+4 floor. Nothing extra on this acoount is payable to contractor.

M&L for Preparation of old plain surfaces plastered or unplastered and applying one coat of Oil bound distemper on ceiling,through mechanical means complete all as specified and directed.

M&L for Preparation of old surfaces plastered or unplastered /stone sufaces and applying one coat of Oil bound distemper on walls with 1.00 to 1.50 mm thick wall care putty on walls complete finished even and smooth,through mechanical means through mechanical means complete all as specified and directed. Note-water proof cement based putty @1kg (undiluted) per sqm of average thickness 2mm over the plastered /old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mecghanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface . Step 1: Mix the putty powder by adding water as manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine/manully of putty application finishing the surface even and smooth in level without any undulations. Step 3: Allow 6-8 hrs time to dry the putty surface

M&L for preparation of existing kerb stone concrete / brick surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering in 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and fair(w/o using extra cement) using integral water proofing compound, complete all as specified and directed.

M&L for 1.00 to 1.50 mm thick wall care putty on walls/cieiling complete finished even and smooth complete all as specified and directed.

M&L for Preparation of new surfaces plastered or unplastered and applying two coat of weather proof exterior paint over a one coat of primethrough mechanical means complete all as specified and directed. Note for item No 01 to 09:- Applied rates for above items also include necessary scaffolding, jhulla, tools, plants and safety equipments & measures to carry out the works upto a height of G+4 floor. Nothing extra on this acoount is payable to contractor.

Supply only integral water proofing compound ISI marked, complete all as specified.

M&L for complete removal of old treatment on surfaces of walls/ ceiling through electrically operated grinder (wall sanding machine with internal dust extraction system) for preparation of old plastered surfaces of wall/Ceiling, complete all as specified and directed upto 20 mtr height including necessary steel scafolding upto 20 mtr height where required, complete all as specified and as directed by Engr-in-Charge.