Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.7 L+₹11,895.26 (2.62%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹4.7 L+₹16,672.47 (3.67%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹9,560
Closing Date
5 Jun 2026, 1:00 pmClosed
AE/KRESD/PWDte
Office of The Assistant Engineer, Kolkata Raj Bhavan Electrical Sub Division, P.W.Dte., 2 Larkin Lane, Kolkata-700062
Supply and delivery of electrical maintenance materials-LED downlighter, ceiling fan, exhaust fan and bracket fan for Lok Bhavan Kolkata.
2026_WBPWD_5014404_1
WBPWD/AE-KRESD/NIT-05/2026-27
Open Tender
ELECTRICAL WORKS M/R
Percentage
15 days
Kolkata Raj Bhavan
Please refer Tender documents.
4 documents required · 4 mandatory
₹9,560
31 Jul 2026
22 May 2026
8 Jun 2026
23 May 2026
5 Jun 2026
23 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying & Delivary of 36 Watt with System lumen efficacy ≥135 lm/Watt LED Recessed/surface Down lighter (Round/ square/ Rectangular) 2'x2' with powder-coated pressure Die-cast Aluminium/CRCA sheet body with high-transmission opal PMMA/ polycarbonate/ prismatic diffuser having uniform light distribution and construction as per IS : 10322. The driver rated output wattage should be 10% to 15% higher than lamp rating and efficiency Driver >80%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range 00 to 400 C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , PF ≥0.9, IP20, CRI >80, life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect and LED Chips of SMD Low to mid-power, as per requirement (LM-80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Signify/Crompton/Wipro) | 100 | Nos. | 2,174 | ₹2,17,400 |
| 2Supplying & Delivery of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD with powder-coated pressure Die-cast Aluminium with high-transmission opal PMMA/ polycarbonate/ prismatic diffuser having uniform light distribution and construction as per IS : 10322. The driver rated output wattage should be 10% to 15% higher than lamp rating and efficiency Driver >80%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range 00 to 400 C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , PF ≥0.9, IP20, CRI >80, life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect and LED Chips of SMD Low to mid-power, as per requirement (LM-80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. System lumen efficacy shall be minimum 110 lm/watt. (Signify/Crompton/Wipro) | |||||
| 2.1 | 5-7 watt | 15 | Nos. | 478 | ₹7,170 |
| 2.2 | 12-15 watt | 25 | Nos. | 788 | ₹19,700 |
| 3 | Supply & delivery of 230 V, 50 Hz, single phase, 52 watts, 48" (1200 mm)
Sweep, speed 320 rpm (minimum), A.C. Ceiling Fan and class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod (14 SWG & higher thickness), 2 nos. canopies, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 210 cu.m/min (minimum), without Regulator including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required.(Crompton Greaves/EPC/Orient/ USHA) | 12 | Nos. | 2,354 | ₹28,248 |
| 4 | Supply & delivery of 230 V, 50 Hz, single phase, 58 watts, 56" (1400 mm)
Sweep, speed 300 rpm (minimum), A.C. Ceiling Fan and class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod (14 SWG & higher thickness), 2 nos. canopies, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 250 cu.m/min (minimum), without Regulator including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required. (Crompton Greaves/EPC/Orient/ USHA) | 12 | Nos. | 2,487 | ₹29,844 |
| 5 | Supply & delivery of 230 V, 50 Hz, single phase, 40 watts , 9" (230 mm)
Sweep, speed 1350 rpm (minimum), A.C. Exhaust Fan and class of insulation: B, 3 nos. metal (Aluminium alloy) blades, copper winding,
steel/Al body. Power Factor not less than 0.9 and minimum air delivery
650 cmh (minimum) including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more
than 2 mega ohm, suitable for compliant to IS 374:2019 and external
connections with 1.5 sq.mm FR, PVC insulated copper conductor single
core cable and earthing etc. as required. (Crompton Greaves/EPC/Orient/ USHA) | 6 | Nos. | 1,783 | ₹10,698 |
| 6 | Supply & Delivery of 230 V, 50 Hz, single phase, 85 watts, 18" (450mm),
speed 1325 rpm (minimum), Bracket Fan and class of insulation: B, 4
nos. metal (Aluminium alloy) blades, copper winding, steel/Al body with
metal back cover. Power Factor not less than 0.9 and minimum air delivery 110 cu.m/min (minimum), including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required.(Crompton Greaves/EPC/Orient/ USHA) | 15 | Nos. | 5,852 | ₹87,780 |
| 7 | Add. G.S.T.@ 18% on total of item | 1 | item | - | - |
| 8 | Add. LWC.@ 1% on total of item | 1 | item | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.17 MB
2911_ii.pdf
Tender Documents • 0.50 MB
BOQ_5082473.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .