Karnataka

Retender

Works

Buildings

Package2- 1.Construction of toilet and other development work for Navchetana Special Childrens School in Koppa Town Panchayat and 2. Renovation/upgradation works-of bus stand and shops behind bus stand under koppa Town panchayath.

Directorate Of Municipal Administration

DMA District Urban Development Cell Chikkamagaluru | Karnataka

Amount: ₹30.6 LCloses: 15 Mar 2024Closed

Timeline

Published4 Mar 2024
Closed15 Mar 2024
Retendered4 Mar 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 4 Mar 2024

Tender Value

₹30.6 L

EMD Value

₹76,600

Closing Date

15 Mar 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

mattikatti

Office Number

9164589902

Mobile Number

9481724539

Work Description

Package2- 1.Construction of toilet and other development work for Navchetana Special Childrens School in Koppa Town Panchayat and 2. Renovation/upgradation works-of bus stand and shops behind bus stand under koppa Town panchayath.

Tender Information

Tender ID

DMA/2023-24/BD/WORK_INDENT16152

Reference Number

DMA/2023-24/BD/WORK_INDENT16152

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

DMA District Urban Development Cell Chikkamagaluru

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredStatement indicating the total value of the civil engineering works executed and payment received in last 5 years certified by the chartered accountant to be scanned and uploaded necessary details shall be uploaded as per the respective formats furnished along with the qualification information.

RequiredStatement indicating the A.Existing commitments and ongoing works, B.Details of works for which tenders are already submitted. The statements should furnished as per statement 1.3 A,B of Section 3 of Qualification information in Standard Bid document.

RequiredThe statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

RequiredGST DECLARATION CERTIFICATE

RequiredPWD Registration Certificate

RequiredWork Done Certificate as indicated in General condition/TECHNICAL CRITERIA

RequiredContractors has to upload the EPF Registration with JANUARY 2024 Challan Copy

Requiredkw-1 Qualification information FORMATS TO BE ATTESTED BY THE NOTARY/BY THE GAZETTED OFFICER

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPP Portal on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP Portal due to internet connectivity issues and technical glitches at bidders end.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenderer should be a PWD registered Contractor - Class-4 and above also Contractors should have Registration of GST, Employers Provident Fund and tenderer should submit Registration Certificate along with technical bid.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should follow strictly prevailing rules of labour act.

Conditional tenders will not be accepted.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPP Portal.

All Scanned Documents of the Original should be up-loaded, Executive Engineer/ Superintending Engineer/ Chief Engineer reserves the right verify the Original Documents before approval, 0riginal documents / Certificates for qualification shall be produced when called for during evaluation of tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

The Tenderer should maintain the Work during defective liability period as indicated in The Contract Data

The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got tested by the Quality Control Authority before use on the work.

Tenderer shall obtain the Work done Certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the tender. The Original Certificate shall be produced at the time of opening of Technical Bids for physical verification.

If the tender of the successful tenderer is seriously unbalanced in relation to the Employers estimate of the cost of the work to be performed under the contract, the Employer may require the Tenderer to produce detailed price analysis for any or all items of the Bill of Quantities, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. After evaluation of the price analyses, the Employer may require that the amount of the performance security set forth in Clause 24 be increased at the expense of the successful Tenderer to a level sufficient to protect the Employer against financial loss in the event of default of the successful under the contract.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount separately. And Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore, amount put to Tender and ECV amount are excluding GST. KPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, Contractor has to quote the rates excluding GST and the GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily.

The employer reserves the rights to reject one or all tenders without assigning any reason.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

PERFORMANCE SECURITY - The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee) at 5% of the amount put to tender with in 20 days after approve of tender as per rule of the tender and clause 44 of the agreement in the form of cash/Bankers Cheque, D.D, Pay order Bank Guarantee or N.S.Cs, duly pledged in the name of EXECUTIVE ENGINEER DUDC, CHIKKAMAGALURU.

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The tender validity period is 90Days from the date of opening of Tender

Contractors has to upload the EPF Registration with JANUARY 2024 Challan Copy Contractors has to submit their labour EPF details with every Running Bill

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document.

Statement indicating A the total value of the civil engineering works executed and payment received in last 5 years certified by the chartered accountant to be scanned and uploaded B work performed as a prime contractor on works of similar nature during the last 5 years Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded necessary details shall be uploaded as per the respective formats furnished along with the qualification information.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i e 2018-19, 2019-20, 2020-21,2021-22 & 2022-23 a achieved in at least TWO financial year a minimum financial turnover of Rs. 30.63 Lakhs in all classes of Civil Engineering Construction works only Submit the scanned copy of the Profit & loss Statement indicating the contract receipts certified by the chartered accountant

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i e 2018-19, 2019-20, 2020-21,2021-22 & 2022-23 satisfactorily completed as prime contractor, at least one similar work value not less than Rs. 15.32 Lakhs Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded.

To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender AND Should up-load Scan copy of pan card Valid GST Registration Certificate & also up-load address proof certificate Aadhar Card DL Pass port etc.,

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i e 2018-19, 2019-20, 2020-21,2021-22 & 2022-23 satisfactorily completed as prime contractor, at least one similar work value not less than Rs.15.32 Lakhs Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded.

Work Done Certificate

Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. with relevent documents (Attested by the notary)

Others -- ATTTESTED BY THE NOTARY

List of existing commitments and ongoing works

Work Done Certificate

List of works for which tenders already submitted

Others -- LIST OF WORKS WITH WORK INDENT NUMBER

Contractor has to upload GST Declaration Certificate in the prescribed format.

Others -- DECLARATION CERTIFICATE

Capabilities of Vendor

Contractors has to upload the EPF Registration with JANUARY 2024 Challan Copy

Others -- VALID DOCUMENTS

PWD class- 3 and above Registration Certificate (Valid License copy issued by competent authority.)

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i e 2018-19, 2019-20, 2020-21,2021-22 & 2022-23 a achieved in at least two financial years an average financial turnover of Rs.30.63Lakhs in all classes of Civil Engineering Construction works only Submit the scanned copy of the Profit & loss Statement indicating the contract receipts certified by the chartered accountant. WITH UDIN NUMBER

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹770

EMD Fee Amount

₹76,600

Important Dates

Last Activity

4 Mar 2024

Published

4 Mar 2024

Bid Opening

16 Mar 2024

Download Ends

7 Mar 2024

BOQ Preview

•

Package2- 1.Construction of toilet and other development work for Navchetana Special Childrens School in Koppa Town Panchayat .

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost and conveyance of all materials, labour, hire charges of machi...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

•

Providing and laying in position Cement Concrete for all Super structures of building Road works, Water works, Irrigation works AND super structure works of bridges up to 3.50 m height. The granite tr...

•

6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, la...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround d...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer) and lead free...

•

Distempering with oil bound washable distemper of approved brand an manufacture to give an even shade : New work (two coats) over and including water thinnable priming coat with cement primer after t...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

•

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.One urinal basin with 5 litre white P.V.C. auto...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

•

Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, load...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expan...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

•

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC ) pipes having thermal stability for hot and cold water supply, including all CPVC plains and brass threaded fittings, i/c fixing the pipe with...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS ;12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- Including cost and conveyance of all materials, labour, hire charges of machin...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm

•

thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted w...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

•

Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead a...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm ---- Includi...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall ---- Incl...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi stran...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Including cost and conveyance of all materials, labo...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.3 6A Three Way socket ---- Including cost and conveyance of all material...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- Including cost and conveyance of all materials, labour, h...

•

Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4' Tube light fitting. ---- Including c...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. 32 A ---- Including cost and conveyance of all materials, labour, hire char...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...

•

Supplying of 1.1 kv LT UG cable XLPE or heat resistant PVC insulated , PVC extruded inner sheath armoured UG LT cable as per IS - 1554 ( Part -1)or IS-7098 Part-1, Armouring strip thickness in averag...

•

PACKAGE 2- 2. Renovation/upgradation works-of bus stand and shops behind bus stand under koppa Town panchayath.

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3 5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) i...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10,to 20mm thick in cement mortar 1:3 including cutting the patches in,proper shape and replastering the surface of the wall includi...

•

Supplying and fixing rolling shutters of approved make, made of required,size M.S. laths, interlocked together through their entire length and,jointed together at the end by end locks, mounted on spec...

•

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 ltr/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly ...

•

Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 litrs/10 m² complete including cost of Pri...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Painting with oil type wood preservative of approved brand and manufacture: Old work (one coats) as per specifications and as per directions of Engineer in charge. ---- Including cost and conveyance o...

•

Dismantling old plaster or skirting raking out joints and cleaning the,surface for plaster including disposal of rubbish to the dumping ground,to the appropriate disposal area as per direction of Engi...

•

Distempering with oil bound washable distemper of approved brand,and manufacture to give an even shade :New work (two coats) over,and including water thinnable priming coat with cement primer after,th...

•

Providing and laying red oxide flooring 40 mm thick, with an under layer,of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster,with 1:3 cement mortar mixed with red oxide finished wit...

•

Supplying 19/20mm dia 2.0mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting. Finishing with necessary cement plastering complete 8"x6"x3" (203...

•

wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper withlow conductor resistance single core wire in open or concealed system of wiring with specified IS-...

•

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293- 6Amps one way. ---- Including ...

•

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293,- 6Amps 3way socket. ---- Inclu...

•

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293,- 32Amps DP switch ---- Includ...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. ---- Including cost and conveyance of all ma...

•

Supplying & fixing retrofit type-PL LED Lamp W LED,linear source with CCT 6500 degree K, CRI greater than 70percent. efficacy, greaterthan 80 lumen per W, life greater than 25000 burning hours and,Co...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-2 Qualification information.docx

Others - QUALIFICATION INFORMATION FORMATS TO BE UPLOADED BY THE BIDDER AFTER GETTING ATTESTATION BY THE NOTARY OR GAZETTED OFFICER • 0.02 MB

GST DECLARATION CERTIFICATE.docx

Others - DECLARATION CERTIFICATE • 0.01 MB

KW 2 -koppa (1).doc

Tender Document • 4.37 MB

required docs only upload in eproc.pdf

Instructions to Tenderers • 0.84 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].