8485 REPAIRS REPLACEMENT AND CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANKS SOAKAGE WELL AND CONNECTED MISC B R WORKS AT 10 SIKH MAP PH I AND DAD RESIDENTIAL COMPLEX ETC UNDER AGE BR I OF GE SOUTH PUNE

Amount

Scooping & taking out sludge, sullage and foreign materials from septic tank, soak wells of any description & depth including removing & re-fixing of accessories and appliances required for safe disposal of sludge, sullage and foreign materials either by carrying the same in covered van / trolley outside defence land and it should be disposed off at such place which is not determinate to public health, complete all as specified and directed. Note :- Net depth shall be measured for payment purpose after bailing out water and the cost of bailing out water shall be deemed to be included in unit quoted rates.

Dismantling and breaking up RCC / SWG drain pipes, set in cement mortar of following sizes and removing debris from site complete all as directed by Engr-in-Charge :- (a) 150 mm bore

(b) 200 mm bore

(c.) 250mm dia

(c.) 300mm dia

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / loose soil, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed.

M&L for 250mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed. Note for item nos. 7 to 10 :- Laying of sewage line work is to carried out in running sewage water therefore, temporary diversion /plugged of existing sewage line & bailing out of sewage water is the responsibility of contractor and the cost for the same provisions are to be deemed to be included in unit quoted rates.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 150mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 200mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 250mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 300mm bore of pipe, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

S&F in repairs PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125x110mm, setting and jointing to waste pipe pipe with solvent cement, complete all as specified and directed.

Cleaning of manholes of any size and of any depth by taking out semi solid / solid sludge from manholes completely and dispossed off the same in covered vehicle out side the MOD land complete all as directed by Engr-in-charge.

M&L for cleaning of blockage of sewer lines of any type & any dia of sewer line (ie branch sewer line or main sewer line) by way of cleaning desludging foreign material as well as rodding of sewer line between succession manholes manually /mechanically or by pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap, water closet, soil waste / vent pipe, gully trap up to final drop / outlet into septic tank, soakage well complete all as specified and directed by Engineer-in-charge.

Cleaning of sewage system on day to day basis including blocked WCs, blocked WHB outlet , bottle traps, nahani traps, floor traps, gully traps, soil/waste pipe running on external walls of building including junctions in running / flowing condition without any disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off of the sludge / waste materials outside the Defence land by deploying 02 (TWO) safaiwala per day (All working days) complete all as specified and directed by Engineer-in-charge. Note :- (i) Complaint shall be completed within 24 hours and major complaints within a week. (ii) If safaiwala not attended the complaint within the time frame as mentioned above, 50% of quoted rate shall be deducted from the contractor’s dues as a penalty. (iii) The contractor shall be responsible to maintain daily job completed by safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for the following dia of pipe, complete all as specified and directed:- (a) 150mm bore

(b) 200 mm Bore

(c) 250 mm bore

Demolition of cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed.

Dismantling of stone / PCC block / brick masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with modular bricks in CM 1: 6 complete all as specified and as directed.

M&L for brick work with fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in CM 1: 4 complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching & copping to manholes etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in surface channels and drain including necessary form work etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M & L 15mm thick rendering in cement mortar 1:6 on block walling / brick masonry work or concrete surfaces, surfaces to be finished even and smooth with using extra cement, complete all as specified and as directed.

Dismantling & breaking of drain pipes of 75mm to 110 mm dia of AC/ PVC, set in cement mortar or adhensive, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed. Note for item nos.37 & 40:- Quoted rates shall be deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Fixing only 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Fixing only 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access, complete all as specified and directed.

S&F in repairs stainless steel grating of 100mm in size suitablr for nahni trap/floor including jointing, complete all as specified and directed.

M&L for precast factory made manhole cover of medium duty, area of each cover n.exc 0.75 Sqm, 100mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring, well compacted, finish surfaces even, complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid on 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base filling complete all as specified and directed by Engr-in-Charge

S&F in repairs vitreous china water closet pan (squatting pan) white including provn of concrete bedding as fixed in repairs. Orissa pattern size 580x440mm white with integral foot rests (excluding flushing system and flush pipe) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured Ceramic tile 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces including triangular filleting in CM 1:4 on top edges, complete all as specified and as directed

M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

M&L for vitrified tiles, area of each tile not exceeding 0.36 Sqm each, 10mm thick, light shade, set and jointed in neat cement slurry and pointed in colour cement as in floor laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for granite 18mm thick (of any type) work (table rubbed and polished) in steps ,pillar, window cill, shelf, cooking platform and like laid over and including 10mm thick rendering in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, shelf cooking platform, and other similar situations, complete all as specifed and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F machine cut cuddappa stone slab one side polished 40 to 50 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar (1:4) complete all as specifed and directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304, ISI Marked of standard size 30"x32"x8"/10" and of approved quality of finish complete all as specified and as directed.

S&F in repairs vitreous china wash basin white flat back, size 580x450 mm, including fixing taps PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length etc complete all as specified and directed.

S&F in repairs 10 litres capacity PVC flushing cistern low level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia overflow pipe upto floor level complete all as specified and as directed.

Taking up or down GI water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :- (a). 15mm dia bore.

(b). 20mm dia bore.

Supplying, fixing, jointing and testing galvanised iron tubing, concealed, medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

S&F in repairs 20mm bore ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in replacement bib tap fancy type of cast copper alloys (Chromium plated) with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe bore complete all as specified and as directed.

S&F in repairs fancy type Bib tap 15mm size standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm, 105gm) complete all as specified and as directed.

S&F in repairs pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in replacement shower rose fancy type brass chromium plated 125 mm dia heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specified and as directed.

S&F in repairs of plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs stop valve 15mm bore (concealed type) chromium plated cast copper alloy fancy type with long shank and cup screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair tubular towel rail brass chromium plated 20mm dia 600mm long fixed with brass screws complete all as specified and as directed.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and as directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc, capacity exceeding 250 litres and not exceeding 500 litres, complete all as specified & directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc, capacity exceeding 500 litres and not exceeding 1000 litres, complete all as specified & directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm² fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and as directed.

F S ENTERPRISES

GS Associates

M/s.BAJRANG CONSTRUCTION

ANIL CONSTRUCTION CO.