Construction work by CC in Shantam and Sundaram sections in Ward-74 Sector-19 Vasundhara.

Dismantling Of Tile Work Complete as per MORD Analysis of rate and disposal of malba upto 5.00 Km complete.

Scarifying the existing Bituminous surface to a depth of 150 mm and disposal of scarifiedmaterial with a lift upto 3 m and lead upto 1000 mas per Technical Specification clause 301.4.1

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Supply and laying of Precast cement concrete I-shaped interlocking Paver blocks ISI Marks confirming to S 15658-2000 with top layer of minimum 8 mm thickness having Plan dimensions 200 (160+120) mm of O.P.Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro compression mechanism. The compressive strenght of Paver shall not be less than 30Mpa(M-30) and weight 5 Kg per No. and including cost of materials with a blanket layer of 4 cm thik fine sand layer materials,labour and T&P etc required for proper completion of work as directed by the Engineer -in-charge. Rate approved by S.E.R.E.D.Meerut.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 500 mm internal diameter As DSR-2023 Item-19.19.2.2

Supply and fixing of M.S sign board of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete. As per SE RED Meerut, Sanction letter No.1108 Dated 09.10.18