Non CSR Electrical Iteam

Supplying and erecting recessed adjustable LED COB downlight of 30 Watt with pressure die-cast aluminium housing, high efficiency COB LED having minimum efficacy of 100 lm/W, CRI ≥80, CCT 3000K/4000K/6500K as specified, complete with high efficiency const

Supplying and erecting recessed adjustable LED COB downlight of 40 Watt with pressure die-cast aluminium housing, high efficiency COB LED having minimum efficacy of 100 lm/W, CRI ≥80, CCT 3000K/4000K/6500K as specified, complete with high efficiency constant current electronic driver. Luminaire shall have two-direction adjustable tilt, power factor ≥0.90, THD <10%, input voltage 140–270V AC, inbuilt 3.5 kV surge protection, IP20 protection, complete with all accessories, wiring connections, mounting hardware, testing and commissioning as required.

Supplying and erecting recessed adjustable LED COB downlight of 20 Watt with pressure die-cast aluminium housing, high efficiency COB LED having minimum efficacy of 100 lm/W, CRI ≥80, CCT 3000K/4000K/6500K as specified, complete with high efficiency constant current electronic driver. Luminaire shall have two-direction adjustable tilt, power factor ≥0.90, THD <10%, input voltage 140–270V AC, inbuilt 3.5 kV surge protection, IP20 protection, complete with all accessories, wiring connections, mounting hardware, testing and commissioning as required.

Supplying and erecting recessed adjustable LED COB downlight of 12 Watt with pressure die-cast aluminium housing, high efficiency COB LED having minimum efficacy of 100 lm/W, CRI ≥80, CCT 3000K/4000K/6500K as specified, complete with high efficiency constant current electronic driver. Luminaire shall have two-direction adjustable tilt, power factor ≥0.90, THD <10%, input voltage 140–270V AC, inbuilt 3.5 kV surge protection, IP20 protection, complete with all accessories, wiring connections, mounting hardware, testing and commissioning as required.

Design, fabrication, assembling, supply,installation, testing and commissioning of cubicle type LT panels as per IEC 61439 -Part 1 & 2 suitable for 415 V 3 phase ,4 wire 50 Hz AC supply system fabricated in compartmentised design from CRCA sheet steel of 2 mm thick for frame work IP 52 and covers,3 mm thick for gland plates l/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy busbars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm x 5 mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earth studs,solid connection from main busbar to switchgears with require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable,cable alleys,cable gland plates i/c accessrories as per specification and providing switchgears, metering instruments etc. for follwing panels. Rate shall inclusive of all required all accessories circuting indication lamps, MFM & all other as shown in SLD. (Panel RA Seperataly Attached)MAIN LT PANEL INCOMER :315A FP MCCB Feeder - 1 Nos.315A FP MCCB Feeder - 1 Nos.315 A MCCB SPREADER LINK - 1 Nos.CT 315A/5A 10 VA Cl 0.5 - 3 Nos.Indicating lamp 240V AC R/Y - 2 Nos.2A SP MCB - 6 Nos.Bus Bar Support OUTGOING :250 A FP MCCB Feeder - 2 Nos.Indicating lamp 240V AC On/Off/trip - 6 Nos.Indicating lamp 240V AC On/Off/trip - 6 Nos.160 A FP MCCB Feeder - 2 Nos.160 A MCCB SPREADER LINK - 2 Nos.ndicating lamp 240V AC On/Off/trip - 6 Nos.Aluminum Bus Bar Size with 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm.40 mm X 10 mm ,40 mm X 10 mm,40 mm X 10 mm

Design, fabrication, assembling, supply,installation, testing and commissioning of cubicle type LT panels as per IEC 61439 -Part 1 & 2 suitable for 415 V 3 phase ,4 wire 50 Hz AC supply system fabricated in compartmentised design from CRCA sheet steel of 2 mm thick for frame work IP 52 and covers,3 mm thick for gland plates l/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy busbars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm x 5 mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earth studs,solid connection from main busbar to switchgears with require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable,cable alleys,cable gland plates i/c accessrories as per specification and providing switchgears, metering instruments etc. for follwing panels. Rate shall inclusive of all required all accessories circuting indication lamps, MFM & all other as shown in SLD. (Panel RA Seperataly Attached)LIGHT-POWER PANEL INCOMER :160 A FP MCCB Feeder - 1 Nos.160 A MCCB SPREADER LINK - 1 Nos.CT 160A/5A 10 VA Cl 0.5 - 3 Nos.Indicating lamp 240V AC R/Y - 2 Nos.Indicating lamp 240V AC B - 1 Nos.Indicating lamp 240V AC On/Off/trip - 3 Nos.Multifunction meter - 1 Nos.2A SP MCB - 6 Nos.Bus Bar Support OUTGOING :63 A FP MCB Feeder - 5 Nos.63 A MCB SPREADER LINK - 5 Nos.Indicating lamp 240V AC On/Off/trip - 15 Nos.40 A FP MCB Feeder - 5 Nos.40 A MCB SPREADER LINK - 5 Nos.Indicating lamp 240V AC On/Off/trip - 15 Nos.Aluminum Bus Bar Size with 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm.20 mm X 10 mm ,20 mm X 10 mm,20 mm X 10 mm

Design, fabrication, assembling, supply,installation, testing and commissioning of cubicle type LT panels as per IEC 61439 -Part 1 & 2 suitable for 415 V 3 phase ,4 wire 50 Hz AC supply system fabricated in compartmentised design from CRCA sheet steel of 2 mm thick for frame work IP 52 and covers,3 mm thick for gland plates l/c cleaning and finishing complete 9 tank process for powder coating in approved shade RAL 7032, extendable type TPN aluminium alloy busbars of high conductivity,DMC/SMC busbar supports, with bottom base channel of MS section not less than 75mm X 50 mm x 5 mm thick, entire panel shall have a common copper earthbar of required size at the rear with 2 nos earth studs,solid connection from main busbar to switchgears with require size of aluminium busbar & control wiring with 2.5sqmm FRLS insulated copper conductor cable,cable alleys,cable gland plates i/c accessrories as per specification and providing switchgears, metering instruments etc. for follwing panels. Rate shall inclusive of all required all accessories circuting indication lamps, MFM & all other as shown in SLD. (Panel RA Seperataly Attached)HVAC Panel INCOMER :250 A FP MCCB Feeder - 1 Nos.250 A MCCB SPREADER LINK - 1 Nos.CT 250A/5A 10 VA Cl 0.5 - 3 Nos.Indicating lamp 240V AC R/Y - 2 Nos.Indicating lamp 240V AC B - 1 Nos.Indicating lamp 240V AC On/Off/trip - 3 Nos.Multifunction meter - 1 Nos.2A SP MCB - 6 Nos.Bus Bar Support OUTGOING :63 A FP MCB Feeder - 15 Nos.Indicating lamp 240V AC On/Off/trip - 45 Nos.Indicating lamp 240V AC On/Off/trip - 45 Nos.Aluminum Bus Bar Size with 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm.30 mm X 10 mm,30 mm X 10 mm,30 mm X 10 mm

Supplying & erecting end pole D. P. Structure for 22/0.415 kV, 200 kVA Transformer with R.S.J. Pole 2 Nos. of size 100mm x 116 mm x 11 m Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 400 Amps as incomer & 6 Nos.200 Amps Kitkat / MCCB for out going circuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set & L.A. Set. 2 Nos. Top channel of size 100 mmx 50 mm for erection of A.B. Switch & 2 Nos. Base channel of size 100 mm x 50 x mm for erecting Transformer.Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for erecting Distribution Box , Transformer Belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, Nut-bolts. V cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. Structure shall be erected in c.c. foundation complete.

Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features 4/5 MP Bullet Camera. 1/2.7" or higher 4MP PS CMOS Image Sensor Max. 4MP (2688 x 1520)@25fps or above /Max. 5MP (2880x1620)@25fps or above Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Quad stream WDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB, AGC, BLC, HLC, Digital watermarking IR Range of 30Mtr or above, Warm Light Range of 30Mtr or above.3.6mm fixed Lens (2.8mm, 6mm Optional)Micro SD Card upto 256GB Supported, PoE, IP 65/67, IK10 ISO 9001: 2015, ISO 20000-1 : 2018, CE, FCC and RoHS, BIS, STQC ER Certificate.

Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features 4/5MP Vandal Dome Camera.1/2.7" or higher 4MP PS CMOS Image Sensor Max. 4MP (2688 x 1520)@25fps or above /Max. 5MP (2880x1620)@25fps or above Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Quad Stream WDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB, AGC, BLC, HLC, Digital watermarking Support Built-in Mic IR Range of 30Mtr or above., Warm Light Range of 30Mtr or above. 3.6mm fixed Lens (2.8mm, 6mm Optional) Micro SD Card upto 256GB Supported, PoE, IP 65/67, IK10 ISO 9001: 2015, ISO 20000-1 : 2018, CE, FCC and RoHS, BIS, STQC ER Certificate.