REPAIRS TO JOINERY CUPBOARDS ETC IN ZONE C AREA OF AGE B/R-I UNDER GE (WEST) LUCKNOW

Amount

Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of brick or stone/boulder masonry complete all as specified and directed.

Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 incl demolition of brick or stone/boulder masonry complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed.

Material and Labour for rendering 10 mm thick cement plaster in CM 1:3 on ceiling of brick or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but n. exc one brick complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed.

Taking down and refixing only shutter of any description exc 1 but n. exc 2 sqm in the same opening complete all as specified and directed.

Supply and Fixing in repair Factory made steel windows double shutter with tubular frame of size 40x79mmm having thickness of steel sheet not less than 1.5mm with 'Z' section side hung glazed shutter fixed (with sash bar) on external side and with wire guage shutter (without sash bar) on internal side and including steel handle 100mm long of MS flat 20x5mm made to shape 02 nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standerd quality complete all as specified and directed

Supply and fixing in repair framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

Supply and Fixing Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply and Fixing Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed.

Supply and fixing second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Mild steel butt hinges shall be paid separately)

Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 35mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats complete all as specified and directed

Supply and Fixing Aluminium powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

Supply and fixing in repair anodised aluminium powder coated glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and directed.

Supply and Fixing in repair powder coated(thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc complete all as specified and directed

S & F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (A) Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

Supply and fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed

Supply and fixing 100mm size Decorative type, handles of stainless steel ISI marked complete all as specified and directed.

Supply and fixing 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.

S & F stainless steel butt hinges 100mm size medium weight and fixed SS screw complete all as specified and directed.

Supply and fixing butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and directed.

Supply and fixing in repair butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and directed.

Supply and fixing 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing cranck /shelf closing hinges suitable for CB/Kitchen cabinet weight and fixed complete all as specified and directed.

S & F in repairs 18/19 mm thick plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.

S & F 0.9 mm thick Decorative laminate (Mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and directed.

Supply and fixing 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and directed.

M&L 18-20mm thick granite stone slab, machine cut and polished in both side as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed.

M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 all as specified and directed.incl Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed

M &L for Non skid ceramic coloured floor tiles shade as approved and size 300 x 300mm x 7mm thick set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed

S & F in repair factory made WPC single extruded 100% lead free ISO certified board of 18mm thick bothside pre laminated shutter for KITCHEN cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be .12-.14 microne pre laminated side with laminated color and other side same laminated color of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

Supply and fixing in repair rubber beading size 65x5mm for doors complete all as specified and directed.

Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and directed.

Supply and fixing in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and directed.

Supply and fixing 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing in repair sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

Supply and fixing in repairs Mild steel window handle left/right including neccesary welding complete all as specified and directed.

Supply and fixing in repairs Mild Steel window peg stay for supporting window glass etc complete all as specified and directed.

Material and Labour for 3mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane incl hacking out old broken glasses complete all as specified and directed.

Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including floor door spring hydaulically regulated complete all as specified and directed.

Supply and fixing in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distamper complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for prepration of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Supply and fixing 8 to 10 mm dia dash through bolts (anchor fastner) of lenth exc 75mm but n exc 100mm including drilling holes in concrete/masonary walls structure using electrically oprated drill machine complete all as specified and directed.

S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed.

Material and labour Running welding in repairs thickness of metal to be welded not exceeding 6 mm thick but not exc 9 mm thick complete all as specified and directed.

Material and labour spot welding in repairs n. exc 2.5cm in length thickness of metal to be welded not exceeding 6 mm thick complete all as specified and directed.

Supply and fixing in repair 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings Supply and fixing for 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer incl dismantling of existing ceiling any type complete all as specified and directed.

S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm but excluding snap grid including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed complete all as specified and directed.

Taking down and refixing of aluminiun window shutter (sliding/opanable) in the same opening after repair/overhauling of aluminium shutter complete incl all necessary rubber beading,aluminium snap beading ,hinges, floor door spring etc all as specified and directed

Supply and fixing in repair for aluminium section of size 38x65x1.3mm thick partition wall fixed to wall on aluminium frame work fixed panel with 5mm thick plain glass and fixed with glazing clips rubber beading including suitable section complete all as specified and directed

Supply and fixing in repair Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface for any sunk or raised mulding including all necessary GI frame wall and channel o.55 mm thick complete with necessary hangers up to 6 mm dia wire as over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl dismantling of existing boards in any position complete all as specified and directed.

S&F in repair heavy duty drawer channel/slider of size 450 mm to 600 mm suitable for cup board and kitchen drawer complete all as specified.

m/s raghubar dayal (BID ID -3468168)

Divya Jyoti Constructions (BID ID -3477342)