Supplying and fixing of water supply fittings and misc. pipe repairing work for residential building, service building and welfare buildings under New Majri Sub Area of Majri Area.

Amount

Supplying gun metal gate valve with C I wheel of approved quality ( screwed end ) 25 mm nominal bore as per direction of Engg-in-charge

Supplying gun metal gate valve with C I wheel of approved quality ( screwed end ) 50 mm nominal bore as per direction of Engg-in-charge

Supplying brass bib cock 15 mm nominal bore of approved quality as per direction of Engg-in-charge

Supplying ball valve (brass) of approveed quality high or low pressure with plastic floats. 25 mm nominal bore as per direction of Engg-in-charge

Supplyingng brass stop cock 15 mm nominal bore of approved quality as per direction of Engg-in-charge

Supplyingg C.P brass shower rose with 15 or 20 mm inlet 100 mm diameter. as per direction of Engg-in-charge

Supplying wash basin with C.I brackets, 15 mm C.P. brass waste of standard pattern, including painting of fitting and brackets cutting and making good the walls wharever required white various china flat back wash basin size 550X400 mm with single 15mm C.P. brass piller tap. as per direction of Engg-in-charge

Supplying PVC waste pipe sink or wash basin including PVC waste fitting complete Flexible pipe 32 mm dia. as per direction of Engg-in-charge

Supplying 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per direction of Engineer-in-charge.

Supplying unplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore as per direction of Engg-in-charge

Providing and fixing G.I.pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall 15 mm nominal bore as per direction of Engg-in-charge

Providing and fixing G.I.pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall 20 mm nominal bore as per direction of Engg-in-charge

Providing and fixing G.I.pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall 25 mm nominal bore as per direction of Engg-in-charge

Providing and fixing G.I.pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall 50 mm nominal bore as per direction of Engg-in-charge

Supplyinging 100 mm dia. Sand cast iron granting for gully trap as per direction of Engg-in-charge

Supplying PVC low level flushing cistern with manually controlled device ( handle lever) conforming to IS:7231, with all fittings and fixings complete 10 liters capacity white as per direction of Engg-in-charge

Supplying solid plastic seat with lid for pedestal type W.C. pan complete white solid pastic seat with lid as per direction of Engg-in-charge

Supplying C.I. sluice valve ( with cap) complete with nuts, bolts, rubber insertions etc. ( the tail piece if required will be paid seprately): 50 mm diameter Class I. as per direction of Engg-in-charge

Supplying C.I. sluice valve ( with cap) complete with nuts, bolts, rubber insertions etc. ( the tail piece if required will be paid seprately): 150 mm diameter Class I. as per direction of Engg-in-charge

Supplying C.I. sluice valve ( with cap) complete with nuts, bolts, rubber insertions etc. ( the tail piece if required will be paid seprately): 100 mm diameter Class I. as per direction of Engg-in-charge

Supplying C.I. sluice valve ( with cap) complete with nuts, bolts, rubber insertions etc. ( the tail piece if required will be paid seprately): 200 mm diameter Class I. as per direction of Engg-in-charge

Supplying G.I. pipes complete with G.I. trenching and refilling etc. fittings including External work. 50mm Dia.

Supplying G.I. pipes complete with G.I. trenching and refilling etc. fittings including External work. 80mm ia.

Supplying of water supply fitting of ISI mark ( GI Socket) 15mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Socket) 20mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Socket) 25mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Socket) 50mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Socket) 80mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Elbow) 15mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Elbow) 20mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Elbow) 25mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Elbow) 50mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Elbow) 80mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Tee) 15mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Tee) 20mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Tee) 25mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Tee) 50mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Tee) 80mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Tee 80mm X 50mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Tee 50mm X 25mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Tee 25mm X 15mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Elbow 25mm X 15mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Elbow 25mm X 20mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Elbow 20mm X 15mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Elbow 50mm X 25mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Socket 25mm X 15mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing socket 25mm X 20mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing socket 20mm X 15mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Socket 50mm X 25mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Socket 80mm X 50mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI reducing Socket 50mm X 40mm dia.) As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 50mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 100mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 150mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 50mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 100mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 150mm length As and when requiredas per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 50mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 100mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 150mm length As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Union) 15mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Union) 20mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI Union) 25mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI flange) 50mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI flange) 80mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI flange) 100mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( GI flange) 150mm dia. As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( PVC olstarn bend of 40mm dia. 750mm long) As and when required as per direction of Engg-in-charge

Supplying of water supply fitting of ISI mark ( CP brass pillar cock of approved make 15mm dia.) As and when required as per direction of Engg-in-charge

Supplying of rubber packing for flange (5mm thick.) as per direction of Engg-in-charge

Supplying of 20mm bibcock brass jumper washer ( 1 packet containing 100 nos) as per direction of Engg-in-charge

Supplying of PVC pillercock washer ( 1 packet containing 100 nos) as per direction of Engg-in-charge

Supplying of PVC bibcock washer ( 1 packet containing 100 nos) as per direction of Engg-in-charge

Supplying of PVC bibcock washer for flexible connecting pipe ( 1 packet containing 100 nos) as per direction of Engg-in-charge

Supplying of water tank connector of 25mm dia. as per direction of Engg-in-charge

Supplying of brass waste coupling for wash basin 32mm dia. as per direction of Engg-in-charge

Supplying of brass waste coupling for wash basin 65mm dia. as per direction of Engg-in-charge

Supplying of GI bend pipe 50mm dia as per direction of Engg-in-charge

Supplying of plug 15mm dia. as per direction of Engg-in-charge

Supplying of plug 20mm dia. as per direction of Engg-in-charge

Supplying of plug 25mm dia. as per direction of Engg-in-charge

Supplying of gland packing rope of dia. 12mm as per direction of Engg-in-charge

Supplying of gland packing rope of dia. 10mm as per direction of Engg-in-charge

Supplying of gland packing rope of dia. 15mm as per direction of Engg-in-charge

Supplying of gland packing rope of dia. 8mm as per direction of Engg-in-charge

Supplying of Cl sluice valve of ISI mark of 80mm dia. as per direction of Engg-in-charge

Supplying of hacksaw blade (100mm) as per direction of Engg-in-charge

Supplying of leather for foot valve of pump as per direction of Engg-in-charge

Supplying of nuts and bolts (Size 5/8"X3") full thread as per direction of Engg-in-charge

Supplying of nuts and bolts (Size 1/2"X3") full thread as per direction of Engg-in-charge

Supplying of mechanical joint for 100mm dia of pipe as per direction of Engg-in-charge

Supplying of mechanical joint for 150mm dia of pipe as per direction of Engg-in-charge

Supplying of mechanical joint for 200mm dia of pipe as per direction of Engg-in-charge

Supplying of cutting blad for cutter as per direction of Engg-in-charge

Supplying of M-seal as per direction of Engg-in-charge

Supplying of 15mm gun metal gate valve as per direction of Engg-in-charge

Supplying of 20mm gun metal gate valve as per direction of Engg-in-charge

Supplying of PVC tank cover of approved quality as per direction of Engg-in-charge

Supplying of 80mm G.I. bend of approved quality as per direction of Engg-in-charge

Supplying 15 mm dia. PVC Aqua kraft of approved make superjet spray with flange 2 in 1 faucet 1.50 meter long including all accessories etc. completed as per direction of Engg-in-charge

Supplying Polyethylene water storage tank with cover and suitable locking arrangemente as per direction of Engg-in-charge

Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 150 mm dia. Sluice valve 450 mm in lenght etc. Complete as per direction of Engg-in-charge

Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 200 mm dia. Sluice valve 450 mm in lenght etc. Complete as per direction of Engg-in-charge

Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 100 mm dia. Sluice valve etc. Complete as per direction of Engg-in-charge

Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 80 mm dia. Sluice valve etc. Complete as per direction of Engg-in-charge

Total impact of GST for the purpose of CTC

Mangesh Bramhadev Mandhare

SINGH CONSTRUCTION