Renovation of Camping House of Deolond colony at PH IV, Deolond.

SOR Item No.- 15.11.1-Dismantling tile/ Kota stone/Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

SOR Item No.-15.2.1 - Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.

SOR Item No.-15.48 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

SOR Item No.-15.6.3 - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.In cement mortar.

SOR Item No.-14.30 - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

SOR Item No.-18.28 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

SOR Item No.-18.14.3 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

SOR Item No.-18.15.2.1 - Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore : Horizontal.

SOR Item No.-18.13.2 - Providing and fixing CPVC gate valve with knob of approved quality : 32 mm nominal bore.

SOR Item No.-18.34 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make coanforming to IS: 8931.15 mm nominal bore

SOR Item No.-18.6.2.2 - 20 MM

SOR Item No.-18.6.2.4 - 32 MM

SOR Item No.- 18.17.2.2 - Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore

SOR Item No.- 17.11.3 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

SOR Item No.- 25.10.1 - Providing and fixing white vitreous China type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15 mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required: White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 190x600x435mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (premium Range)

SOR Item No.- 17.14.1.2 - Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board : 510x1040 mm bowl depth 225 mm

SOR Item No.- 11.42 - Extra for Providing opening of required size and shape for wash basins / kitchen sink in kitchen platform, vanity counters and similar location in marble / Granite / Stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

SOR Item No.- 18.66 - Providing and fixing C.P. brass wall mounting / table mounted sink cock with wall flange of approved quality conforming to IS standards, 15 mm nominal bore.

SOR Item No.- 25.27 - Providing and fixing in position best indian single lever auto mixing diverter (cartridge size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for shower area use only. (Premium Range)

SOR Item No.- 25.31 - Providing and fixing in position best indian C.P. brass made shower arm length 600mm (nickel plating 0.10 micron and chrome plating 0.03 micron). (Premium Range sanitary ware)

SOR Item No.- 25.33 - Providing and fixing in position best indian shower rose 150mm dia, body and face chrome plated, brass made body, silicon based Rubbit cleaning nozzles. (Premium Range)

SOR Item No.- 25.22 - Providing and fixing in position best indian (bonut size 24 mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall mixer with 115 mm bend. (Premium Range)

SOR Item No.- 18.32 - Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore.

SOR Item No.- 18.35 - Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore.

SOR Item No.- 25.3.1 - Providing and fixing white vitreous china European wall hung anti germ fluoro-polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre low level slim dual flushing, PP (Poly propylene) made 80 mm thick concealed flushing cistern, flushing capacity.

SOR Item No.- 25.1.1 - Providing and fixing white vitreous china anti germ fluoro-polymer Coated water closet squatting pan with 100 mm sand cast iron P ans S- trap, and 7.2 litre low level, dual flush, PP (Poly propylene) made open slim wall hung cistern capacity 3 liter / 6 liter flushing, with all fittings and fuxtures complete including cutting and making good the wall and floors wherever required. : White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W.C. pan of size 440x575x250mm with integral foot rests. (Premium Range)

SOR Item No.- 19.4.1 - Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to bempaid seperataly.110 mm diameter OD (min. wall thickness 3.2mm)

SOR Item No.- 14.1 - Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : with cement mortor 1:4 (1 cement : 4 sand).

SOR Item No.- 13.1.2 - 12mm cement plaster of mix : 1:6 (1 cement : 6 sand).

SOR Item No.- 4.1.1.3 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : M15

SOR Item No.- 11.82.1.6 - Providing and laying digital print random design (PGVT) / (GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours & shades, 1st quality / premium quality including grouting the joints with white cement and matching pigments etc. complete : Size 800x1200 mm thickness 9-10 mm

SOR Item No.- 11.53 - Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours & shades, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete.

SOR Item No.- 11.50 - Providing and fixing Ceramig glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS : 15622 of approved make in all colours & shades, except burgundy, bottle green, black laid on 12mm thick bed of cement mortar 1:3 (1 cement : 3 sand) preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete.

SOR Item No.- 11.22.2 - Providing and fixing 18 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity countres, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in-charge : Granite fine grained dark crystal of other colours and various patterns.

SOR Item No.- 13.41 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of Chief Engineer will be required.

SOR Item No.- 13.38 - Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

SOR Item No.- 13.46 - Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

SOR Item No.- 13.52 - Finishing Wall by any mechanical or manual means with Acrylic smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work Two or more coat applied @1.67ltr / 10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre / 10 sqm with crack bridging ability of upto 0.5mm on horizintal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface.

SOR Item No. - 12.58.2.3 - Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm hick with flanges of 27 mm and 37mm, at 1200 mm centre to entre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 0mm long with 6mm dia bolts, other flange of cleat fixed to the ngle hangers of 25x10x0.50 mm of required length with nuts & olts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with onnecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with commended jointing compound , jointing tapes, finishing with jointing mpound in 3 layers covering upto 150 mm on both sides of joint and two ats of primer suitable for board, all as per manufacturer's pecification and also including the cost of making openings for light fittings, ills, diffusers, cutouts made with frame of perimeter channels itably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of ainting with 12.5mm thick moisture resistant gypsum lasterboards Moistbloc as per BS EN 520 confirming to water absorption class H1 with total water absorption < 5%, Green Pro certified by CIl

(i) SOR Item No. - 9.197.1 - Two track panels sliding window made of frame 52 x 44mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

(ii) SOR Item No. - 9.197.2 - Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

(iii) SOR Item No. - 9.197.4 - Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

SOR Item No. - 9.194.1 - Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0

.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of propriate dimension EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & irection of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

SOR Item No. - 10.41 - Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanlized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated / powder coated (base steel as per IS 513 'D' quality, galvanized as per IS 227 with zinc of 120 grams / Sqm) section for external frame 33 x 58 x 0.58mm, glass holding flanges made of polypropylene, sections are to be cut to length, miter joined with corner bracket. The above frames should be fixed to the concrete / masonry walls by meeans of self expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjecent RCC / Brick / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (glazing shall be paid separately as per SOR rate)

SOR Item No. - 9.195.1 - Providing and fixing factory made UPVC white colour fixed glazed windows / ventilators comprising of UPVC ultichambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to PVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap etween frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall hickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

SOR Item No. - 9.6.7.1 - Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes : 4 mm thick glass pane (weight not less than 10 kg / sqm)

SOR Item No. - 9.11 - Extra for Providing frosted glass panes : 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

SOR Item No. - 9.116 - Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod.

SOR Item No. - 9.18.2 - Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter : 30 mm thick including ISI marked stainless steel butt hinges with necessary screws.

SOR Item No. - 9.105.1 - Providing and fixing chromium plated brass handles with necessary screws etc. complete : 125 mm

SOR Item No. - 9.93 - Providing and fixing cromium plated brass hanging type floor door stopper with necessary screws etc. complete.

SOR Item No. - 9.95 - Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

SOR Item No. - 9.102.3 - Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete : 250x10mm

SOR Item No. - 9.69.2 - Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 10 mm

SOR Item No. - 9.68.2 - Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 250x20x6 mm

SOR Item No. - 9.56.1 - Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.

SOR Item No. - 9.66.1 - Providing and fixing ISI marked stainless steel tower bolts black finish (Barrel type) with necessary screws etc. complete - 250x10 mm.

SOR Item No. - 14.2.1 - Fixing chowkhats in existing opening including embedding chowkhats in floors or w

alls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish tothe dumping ground ithin 50 meters lead - Door chowkhat

SOR Item No. - 21.22 - Providing and Fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-charge.

SOR Item No. - 9.256.3 - Providing and Fixing Stainless steel tubular handle bar (Grade 304) with SS screws etc. complete set as per direction of Engineer-in-charge : 32 mm outer dia & 600 mm long.

Each Set

SOR Item No. - 9.76 - Providing and Fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete.

SOR Item No. - 9.217 - Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the xposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary tainless steel screws, all complete as per direction of Engineer-in-charge

SOR Item No. - 9.119.2 - Providing and fixing PTMT Butt hinges with necessary screws etc. complete. - 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms.

SOR Item No. - 9.99.4 - Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : size 75 mm

SOR Item No. - 9.88 - Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality)

SOR Item No. - 17.67 - Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

SOR Item No. - 17.70.1 - Providing and fixing toilet paper holder : C.P.brass

SOR Item No. - 17.72 - Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin.

SOR Item No. - 17.73.1 - Providing and fixing CP brass towel rail of approved quality and make 600x20 mm

SOR Item No. - 17.74 - Providing and fixing CP brass towel ring of approved quality and make 200 mm dia ring

SOR Item No. - 17.75 - Providing and fixing CP brass soap dish of approved quality and make.

SOR Item No. - 25.54 - Providing and fixing in position best indian C.P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range)

SOR Item No. - 25.60 - Providing and fixing in position best indian C.P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range)

SOR Item No. - 10.2 -Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

SOR Item No. - 2.6 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of xcavated earth, lead up to 50m and lift up to .5m, disposed earth to be levelled and neatly dressed.(No extra lift is payable if work is done by mechanical means) All kinds of soil

SOR Item No. - 4.1.2.3 - M-7.5 Nominal Mix - 1 Cement : 4 Sand : 8 graded stone aggregate.

SOR Item No. - 13.68 - Painting with alluminium paint of approved brand and manufacture to give an evenshade. Two or more coats on new work.

SOR Item No. - 10.36 - Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m eight of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer- in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately).

SOR Item No. - 22.23 - Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony withRubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at eakage/seepage area consisting of thefollowing operation.

(i) Removal of damaged aterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in 'V' groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor makingon roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid embrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized lastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural airfor minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized lastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3 rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof embrane in white colour, single component special synthetic resin based flexible thixotropicwhite color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% waterthickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs. (vi) Application of membrane coating shall be got done by authorized applicator of manufacturer. (vii) 5 year of service guarantee to be provided. All above operations to be done in order as per direction on Engineer-in-charge.

SOR Item No. - 28.1 - Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50m and aking up the trenched area to proper levels by filling with earth or earth ixed with sludge or/and manurebefore and after flooding trench with water (excluding cost of imported earth, sludge or manure).

SOR Item No. - 28.2 - Supplying and stacking of good earth specific useful for plantation at site including royalty of any and carriage (earth measured in stacks will be recuced by 20% for payment).

SOR Item No. - 28.3 - Supplying and stacking sludge at site including royalty and carriage (sludge measured in stacks will be recuced by 8% for payment).

SOR Item No. - 28.17.1 - Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50m : Common burnt clay modular bricks : Common burnt clay modular bricks.

SOR Item No. - 28.15.3 - Alpinia Vergated, Alternanthera species, Aspyragus Myerri, Aspyragus Springenii, Aspidistra, Canna (regular, Dwarf), Chlorodendron Inermii, Chlorophytum (Green), Chlorophytum verigated, Coffea Chinensis, Dianella Verigated, Durranta (Goldiana, Green, Verigated), Euphorbia Milli hybrid, Ipomea (Golden leaves), Iresine herbstii, Juniper Prostata, Juniper Africana, Ophiopogon plant, Ophiopogon jaburan, Portulacaria Afra (jade plant, Schefflera Green, Schefflera verigated, Setcreasea Purpurea, Syngonium (Butterfly) species, Syngonium miniature, Syngonium Dwarf, Syngonium variegated, Tradescantia, Wadelia Trilobata, Zebrina Tradescantia, Pendanas, Spider Lily Black, Spider Lily verigated, Aclypha (Red, Green, Mini), Lantana (Red, Yellow, Purple, White, verigated), Haemalia Mini and similar plants.

SOR Item No. - 28.15.4 - Any of one from Alyssum, Anemone, Antirrhinium Hybrid, Aster Hybrid, Begonia and its different varieties, Calendula, Carnation, Coleus, Daisy, Dianthus, Fressia, Gazania, Impatiens, Kalanchoe, Marigold Inca, Missam branthemum, Nemasia, Nasturitium, Ornamental Kale, Pansy Hybrid Sakata, Petunia Hybrids such as Bravo, Star and Picotee, Salvia, Stock, Stock, Verbena.

SOR Item No. - 28.15.8 - Standard Roses H.T. Variety

SOR Item No. - 11.72.1 - Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of requiredcolour strength, thickness pattern, surface texture(smooth/rough) and size/shape, conforming to 15658-2006 made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the bedding layer hrough vibratory compaction byusing plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand including locking with M15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of Engineer-in-Charge. - 80 mm thick C.C. paver block of M-35 grade

SOR Item No. - 11.73 - Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 : 3 (1 cement : 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening sherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

SOR Item No. - 24.11 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05%, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5 - 7 microns epoxy primer on both side of the sheet and polyester top coat 15 -18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single lenth upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling / self-tapping screws of size (5.5 x55mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

SOR Item No. - 10.14.1 - Steel work in built up M.S. tubular s

Note:-(i) Quoted percentage rate shall be exlcuding GST .The GST shall be paid separately by the department as per actual.