CONSTRUCTION OF SLWM WORK AT RS NO 140/1 KARADAGA VILLAGE IN NIPPANI TALUKA

GP-KRDG-Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

GP-KRDG-Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern with fittings, C.I M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required

GP-KRDG-Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery complete as per specifications.

GP-KRDG-Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft,etc

GP-KRDG-Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg per m sides and top sections 1.3 mm, thick, weight 0.933 kg per m.shutter frame section comprising top and bottom section of size 40mmx18mm,etc

GP-KRDG-SOLID PANEL PVC DOOR SHUTTER Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15x15mm for top and bottom rails, covered with heat moulded PVC channel of 5mm thick sheet

GP-KRDG-Providing and fixing PVC Hollow Door Frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19 mm M.S. Square tube of 19 gauge

GP-KRDG-Providing of weld mesh 75 x 25 mm of 6G to 10G. (Market Rate)

GP-KRDG-Providing and installing of pre painted Galvalume iron Trapezoidal profiled sheet of approved make 1060 mm width 1000 mm cover width 28 30 mm crest height with crest distance of 200 mm c c with 2 ribs at the centre for stiffening The total coated thickness TCT fixed over the existing purlins, rafters, channels and trusses.

GP-KRDG-Fabricating, supplying and erecting M.S. angular Truss of span upto 10m. The bottom and top member is provided with 50x50x6mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members etc

GP-KRDG-Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

GP-KRDG-Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specificaiton. Specification No. KBS 4.6.2

GP-KRDG-Providing and removing centering shuttering strutting propping etc for chajjas corbels etc including edges including cost of all materials labour complete as per specification

GP-KRDG-Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications.

GP-KRDG-Providing and removing centering shuttering strutting propping etc and removal of form work for foundations footings bases of columns for mass concrete including cost of all materials labour complete as per specifications

GP-KRDG-Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications.

GP-KRDG-1200 mm RCC pipe NP3 pipe including collar at site

GP-KRDG-Polyenthylene water storage tank of specified capacity L

GP-KRDG-PVC pipe of 10kg cum 110 mm

GP-KRDG-PVC pipe of 10kgcum75 mm

GP-KRDG-PVC pipe of 4kg cum 63 mm

GP-KRDG-Polythylene pipes high density 25mm external dia

GP-KRDG-Brass stop cock

GP-KRDG-Border Tiles 30 x 10 cms

GP-KRDG-Glazed tiles 300x450

GP-KRDG-Ceramic tiles of size 30 x 30 cms

GP-KRDG-Burnt bricks class 35 (non modular)

GP-KRDG-Vitrified tiles 600x600 mm

GP-KRDG-Painter Class I

GP-KRDG-Plastic emulsion paint

GP-KRDG-Binding wire

GP-KRDG-TMT bars Fe 500

GP-KRDG-HOM of Vibrator 0.71 days

GP-KRDG-Plasticizer / super plasticizer

GP-KRDG-Mixer (concrete small used in culvert)

GP-KRDG-Bond stone 20 x 20 x 45 cm

GP-KRDG-Rubble stones

GP-KRDG-Mixer (concrete) - 1 cum Capacity

GP-KRDG-Portland Cement

GP-KRDG-Coarse sand (zone III)

GP-KRDG-Broken stone aggregate 12 mm to 10 mm size

GP-KRDG-Broken stone aggregate 20 mm size