SPL REPAIR TO BLDG NO T-54 AT FIU, PROVN OF FLOOR TILING AND PATHWAY AT BLDG NO 1A AT CARIAPPA ENCLAVE, PROVN OF SHED NEAR SP MARG AND PROVN OF DRAIN NEAR OUTRAM LINE UNDER GE (WEST) LUCKNOW

Amount

Dismantling timber scantling from unframed work 40 sqcm and over in section in any position complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed

Demolition of brick work built in CM including all quions, arches, pillars etc complete all specified and directed.

M&L Second class clean sawn hard-wood in scantlings complete all as specified and directed.

S & F MS framed work as in truss, purlin or rafter of angle iron including distance pieces cleats etc of Fe410-w(Gde E-250) quality-A complete all as specified and directed

M&L for mild steel work as in bands, straps, clamps, hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in fixing of hold fast complete all as specified and directed.

M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.

M & L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.

Dismantling of brick tiles, concrete and cement screed bed and felt in roof treatment complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in padding on roof surface for correcting/ making proper slope on roof, surface finished fair and even without using extra cement complete all as specified and directed. (Note- water proofing compound mix with this PCC as per direction of E-in -Charge and paid separately under relevant Item)

M&L PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in roof kerbs /benching or mud stops, rounded, chamfered on edges including necessary use and waste of from work etc all as specified and directed. (Note-water proofing compound mix with this PCC as per direction of E-in -Charge and paid separately under relevant Item)

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

M & L for provision of roof treatment with polymeric water proofing membrane as specified here under :- (a) M&L plastering 10cm in 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.40 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) Applying a tack coat of hot blown bitumen grate 85/25 @ 1.20Kg/Sqm. (e) M & L for two coats of aluminium paint @ 0.10 litre/Sqm (each coat) on membrane surface all as specified and directed. Note:- (i) PCC padding or rendering for leveling of undulations on roof shall be measured and paid separately (ii) For filling foundulation or levelling either PCC or rendering shall only be allowed for payment purpose.

All as per item No 15 above but treatment on vertical surfaces complete all as specified and directed

M & L brick work with fly ash (old size) bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in cement and sand mortal 1:6 on fair faces of brick wall or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound as per manufacturer instructions finished even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separately under respective item.

M&L preparation of new plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkali resistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.

M&L 1mm thick wall care putty on wall (two or more coats)complete all as specified and directed

M&L for preparation of old plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including over and incl Priming plastered and other surfaces with alkali resistant priming paint complete, complete all as specified and directed.

M & L Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10Cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M & L Preparing old painted surfaces of wood and wood based materials of any description over 10Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparing old/new surfaces of wood and wood based materials, any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L preparation of old painted surface of steel material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

S&F in repair 'E' board Everest make 600x600x4mm thick white pre-laminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm and soaked at 1200mm centres securely fixed to be structural soffits by approved hangers at 1200 mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and jesters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm to be supported . Independently 600x600mm doodles to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction

Taking down chowkhat frame with shutter (without taking out shutter from the frame) area not exc 1.50 Sqm and removing from sites complete all as specified and directed.

All as per item No 32 above but area exc 1.5 Sqm but not exc 4 Sqm each complete all as specified

Taking down shutters of any description exc 1sqm and not exc 2sqm each including removal from site.

All as per item No 34 above but not exc 1 Sqm each complete all as specified and directed.

Supply and fixing second class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 35 mm thick Second class hard wood (sal) glazed & Skelton shutters ,open rebated, prepared to receive glass, gauze etc (divided into panels with plane sash bars any numbers) edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed

All as per item No 38 above but 30 mm thick second class hardwood complete all as specified and directed

S&F 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S & F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffener & supplying & fixing in frame at site complete all as specified and directed

S&F MS Butt hinges "medium weight" cold rolled mild steel 100mm size complete all as specified and directed.

S&F 200mm long alumunium anodised barrel tower bolts of extracted section complete all as specified and directed.

Supply & fixing 150mm long alumunium anodised barrel tower bolts of extracted section complete all as specified and directed.

S&F alumunium handle cast type anodised 125mm long complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

Demolition of PCC in ground floor and paving not exc 15cm thick and below or above ground level complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection including finsihing even & fair complete all as specified and directed

Roughening of surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust complete as specified and directed.

Surface Excavation not exceeding 30 CM deep and averaging 15 CM deep and getting out in Soft/Loose soil complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Non skid ceramic coloured floor tiles any shade as approved size 400x400 x 7-8mm thick over and including 15mm thick screed bed or bedding layer in cement mortal (1:6) in floor etc set and joined in neat cement slurry and pointed with white or coloured cement to match including dismantling of floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

Material and Labour for coloured digital glossy ceramic tiles 300 x 600 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L for coloured vitrified ceramic tile, light shade flooring of size of tile 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 including dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing tiles complete all as specified and directed.

M & L for coloured vitrified ceramic tile, light shade of size 600x600x8-10mm thick as in skirting, after cutting to required size, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L of chequered cement concrete tiles 30cm x 30cm x 25mm thick , set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement & sand mortal 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded aggregate as in sub base to floor, 40 mm thick finished even and fair without using extra cement complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm graded granite stone aggregate as in sub base to floor, 75mm thick finished even and fair without using extra cement complete all as specified and directed.

Supply only glass dividing strips 38mm wide and 3mm thick and inserted in position complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 10cm in girth complete all as specified and directed.

S&F 15mm bore steel water tubing "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor including taking down old GI tubing complete all as specified and directed.

S&F 20mm bore steel water tubing "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor including taking down old GI tubing as directed.

S & F 15 mm bore CP brass centre hole basin mixture quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and directed.

S&F Brass Chromium plated hot & cold water wall mixer 2 in1 system wall unit with over head shower arrangement with hot and cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified and directed .

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.

Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer completed all as specified and directed.

Supply & Fixing in repair copper alloy long body bib taps chromium plated suitable for 15mm bore pipe with capstain head complete all as specified.

Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore, fancy type chromium plated shower rose 125mm dia with shower arm complete all as specified and directed.

S & F in repair rotational moulded polyethylene water storage tanks 500 ltr capacity, triple layered construction (cylindrical vertical with closed top ) hoisted and fixed in position including 20mm dia PTMT float valve all as specified in SSR part-I complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets and including waste pipe 32 mm dia and Waste coupling of PTMT any colour half of full threaded suitable for 32 mm dize discharge pipe complete all as specified and directed.

S&F in repair PVC valve less symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.

S&F in repair PVC (SWR) pipes in any length fixed to wall 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) pipes in any length fixed to wall 75 mm bore complete all as specified and directed.

S&F PVC bends 110 mm bore complete all as specified and directed.

All as item No 87 but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowls suitable for 110mm bore pipes complete all as specified and directed.

S & F in repair 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone aggregate in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified and directed.

M & L for Plain Cement Concrete type C2 1:3:6 (40MM graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M & L for Plain Cement Concrete type D2 1:4:8 (40MM graded stone aggregate) as in foundations , filling and mass concrete complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm and getting out in soft/loose soil complete all as specified and directed

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

Excavating in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation , etc or for shafts, wells, cesspits, manholes, pier holes, etc, not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose the starting point complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed

Material and labour for reinforced concrete pipes 150 mm , class NP2 laid and jointed complete with collar complete all as specified and directed.

M&L for concrete bed to drain pipes 150 mm dia including packing under, and hunching against the sides of pipes after they are laid and tested; in Cement concrete 1:4:8 type D2, complete all as specified and directed.

M & L for Providing Precast Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in cover slab (for manholes etc) set in CM 1:4 including demolition of cement concrete of any description not otherwise specifically provided for complete all as specified directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5/6 Amp switch with PVC (FRLS) insulated unsheathed multi stranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated Bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multi stranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 101 above but for one 5 pin 5/6 Amp socket outlet point on an independent board, complete all as specified and directed.

All as per Item No 101 above but for one 5 pin 5/6 Amp socket outlet point on the same board with other switch, complete all as specified and directed.

All as per Item No 101 above but for One bell/ buzzer point controlled by one bell push, complete all as specified and directed.

All as per Item No 101 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm, complete all as specified and directed..

S & F switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and directed.

S & F switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in1, 3 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in1, 6 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose surface Bakelite three terminal complete all as specified and directed.

S&F bell push single pole one way 5/6 Amp, 240 volt flush type complete all as specified and directed.

S&F call bell AC single pole 240 volt ding dong type complete all as specified and directed.

S&F fan regulator electronic, step up socket type,230 volt,125 W and connection complete all as specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, warm yellow 3000/4000 K, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat No BN 022C LED 22S 6500/4000K PSU CW GR / Havells Havells cat no LUMILINE+BS22WLED865SPCSS/ Orient Taskline AI LBLN-22-C-AL(4000K).

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt, with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. Phillips smart brite BN 021 LED 12S 6500 PSU GR / Havells LUMILINE+BS10WLED865SPCSS/Orient Taskline AI LBLN-12-C-AL

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories ,complete all as specified and directed. Make Philips smart bright cat no BRP042 LED 25 CW SLE SI PSU GR P4210 / Bajaj Edge nxt cat part No ENXT P 24L WH CR PC SD/Havells Endura Sundown with cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD

S&F in repairs of recess type square LED 12W downlighter 6500/4000K all as per specified and directed. Make: Havells cat No. EDGEPRONEOSQDLR12W LED 857S / Phillips green LED ultima square DN096B LED6S-6500/4000 PSU WH/ Bajaj BPSLR 12W WH/WW SQ

S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.Make ECOLINK cat part no.: RC340B LED36S -6500 L60W60 PSU OD ELP/Havells Cat No VENUS NEO 2X 2 36WLED 857/ Bajaj SKYLUX GZI SERIES-RECESSED cat No BZRSQL 36W GZi WH

M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 25mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring, complete all as specified and directed. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

M&L sub main wiring with two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 25mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring, complete all as specified and directed. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB , 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . ( Note: MCCB & MCB to be measured and paid separately)

S &F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair MCCB 63/100 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.

S&F in repair MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in repair MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

Taking down electric meter and refixing on new board after rewiring in replacement of unserviceable wire complete all as specified and directed.

Taking down ceiling fans/exhaust fans dismantling blades and removing fan and blades to store & painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging only to another location of ceiling fan and connection up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F ceiling fan 1200mm sweep, BEE star rated (40-48 W), Min air delivery 215 CFM, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells ES 40/Bajaj Edge HS (Opal white)/Anchor Power

S & F exhaust fan single phase, 230/240 Volt heavy duty metallic body of size 300 mm sweep 1400 RPM with suitable louvers and making connection with twisted copper flexible wire 23/0.076mm includiing taking down old fan complete all as specified and directed. Make:- Usha (Turbo heavy duty metal body)/Havell's (Turbo force HP)/Orient (Heavy duty) NOTE:- Old exhaust fan shall be deposited in AGE E/M yard

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia ( upto 7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

ANIL CONSTRUCTION

M/s SNS Construction

M/S KAUSHIK CONSTRUCTION

M/S SWATI CONSTRUCTION

rajan construction

A ONE ENGINEERING

M/s Chandra Mohan and Sons

VKS INFRA

EVEREST CONSTRUCTION

Abode Artisan Enterprises