PROVN OF APPROX 309 MTR PERIMETER FENCING INCLUDED PERIMETER LED LIGHTS UNDER AGE (I) FATEHGARH

Amount

Excavating in post holes (or similar holes) each n. exc. 0.5 cum in soft / loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc. 50 m and making good surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type B-1 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 410-0 or Fe-310-0 complete all as specified and directed.

M&L mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm long etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, fixed with chain link fencing including cranking, bending, welding complete all as specified and directed.

Supply and fixing chain link fencing of mesh of size 75 x 75 mm of 4 mm dia mild steel galvanized wire including line wires, binding wire fixed to any type of standards, rails, straining bolts etc complete all as specified and directed.

S&F for galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc as directed (each line wire to be measured) etc complete all as specified and directed.

M&L two coats synthetic cement paint over a coat of red oxide primer on steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of surfaces complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft / loose soil complete all as specified and as directed for laying of under ground cable, foundation of pole and stay etc. complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23 cm thick( 8 Cm before laying the cable and 15 Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned down volume shall be measured.

Supply and laying burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed.

Supply and laying in trenches or passing through pipe XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 Sqmm 4 core complete all as specified and directed.

Boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface with the help of GI tubing not exc 40 mm bore for passing UG cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item

S&F of 40 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified and directed

Supply & errection of steel tubuler swaged & welded pole 9.0 m long type 410 SP- 31 complete with CI base plate and finial tapper plug , bolts nuts screw conforming to IS: 2713 (part I to III) complete painting of pole with two coats of aluminium paint over a coat of red oxide primer and applying one coat of synthetic enamel paint alternate yellow & black strips painting ( 5 Nos each strip 300 mm wide) including the following :- complete all as specified and directed. (a) Excavation in trenches exceeding 1.5 mtr wide x 2 mtr deep for pole foundation & getting out in soft loose soil, returning filling of soil after fixing the pole in foundation ramming earth around in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exc. 50 mtrs. (b) M&L for provding PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation 600 mm x 600 mm cross section planting depth 1.8 mtr for concrete incasing the pole upto GL all as directed. (c) M&L for providing PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) for plinth block / collar above GL 300 mm high and 450 mm dia all as directed. (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block / concrete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of synthetic enamel paint in alternatte yellow & block strips all round painting (06 Nos each strip 300 mm wide block. (e) M&L for writing letter or figures (Block, Roman, italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding height in numberig of pole all as directed.

S&F of LED 35 Watt powder coated pressure die cast aluminium SMD street light with heat resistant toughened glass with lens complete all as specified and directed.

M & L for DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 3.5/4 core and fixed to the PCC/Steel Poles by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 Nos of single pole MCB SP 0.5-3Amp 'C' series inside the box and complete all as specified and directed.

M/S shree traders

Gupta Automobiles