Fabrication, Supply and Installation of Aluminium frame Partition at in-active lab of LWTP and storage cabin for Mechanical work shop in WIP of WM, NRB, BARC, Tarapur

Amount

Providing and fixing anodized aluminum work for doors, windows, and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. as per drawings and directions of Engineer-in-charge. (Minimum anodizing thickness of 15 micron)

Providing and fixing glazing in aluminum doors, window, and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge .With clear float glass panes of 4.00 mm thickness

Providing and fixing 9 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS 12823 Grade-I, Type - II in panelling fixed in aluminium doors, and partition frames with C.P brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.

Taking FIM from store WMF for Structural steel work using angles, channels, and other sections, welded and / or bolted in built up sections for, structural steel frame works, for false ceiling in mechanical work shop cabin WIP supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge.

Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards (HILUX ceiling systems) 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the periphery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge

SKY MAX (BID ID -3195480)

JATIN ENTERPRISES (BID ID -3194963)

O. P. ENGINEERING WORKS (BID ID -3195531)