Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC OLD HERALD COLONY SHADIPUR SRI VIJAYA PURAM 744 106 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744106 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹35.3 L+₹25,500 (0.73%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹40.6 L+₹5.6 L (15.9%)Rejected-Finance INDUSTRIAL ESTATE DOLLYGUNJ PORT BLAIR 744 103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹42.2 L+₹7.2 L (20.6%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹43.5 L+₹8.5 L (24.2%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
3 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay, Port Blair
GE, Minniebay, Junglighat (PO), Port Blair -744103
PERIODICAL SERVICES TO MD AND OTM ACCN AT DEF CIVILIAN COLONY, STATIC EME WORKSHOP, NT POOL, CT POOL AT SRINAGAR COLONY UNDER AGE B/R II AT GE MINNIE BAY PORT BLAIR
2024_MES_657755_1
8419/E8
Open Tender
Civil Works
Item Rate
270 days
GE Minniebay, Port Blair
As per tender documents
11 documents required · 11 mandatory
₹500
Yes
GE Minniebay
₹76,000
Yes
4 Oct 2024
5 Jun 2024
6 Jul 2024
5 Jun 2024
3 Jul 2024
19 Jun 2024
Amount
M & L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat of chalk whiting including primer complete all as specified and as directed by Engineer-in-Charge. Make:- Asian Paints Tractor suprema.
M&L for preparation of old surfaces of wall and applying one coat of oil Bound distemper complete all as specified and as directed by Engineer-in-Charge. Make:- Asian Paints Tractor suprema.
M&L for preparation of old surfaces of ceiling and applying one coat of oil Bound distemper complete all as specified and as directed by Engineer-in-Charge. Make:- Asian Paints Tractor suprema.
M&L for applying wall care putty of thickness not exc 3mm (each larger thickness not exc 1.5mm) over plastered surface of wall/ceiling to prepare the surface even and smooth complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing old plastered surfaces and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including scaffolding and safety allangements complete all as specified and as directed by Engineer-in-Charge. Make:- Asian Paints Apex suprema.
M & L applying one coat of weather resistant floor paint including cleaning the floor / concrete surfaces/path by washing or rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI for obtaining a clean surfaces free from algae/organic particles etc complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster of any description on block masonry or stone walls or concrete surfaces including raking out joints, hacking for key complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 5mm thick plaster in cement mortar 1:4 over 10mm cement mortar of CM 1:6 on block wall masonry or concrete surfaces finished even and fair complete with WPC (measured seperately ) complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 10 mm thick plaster in cement mortar 1:6 on block or concrete surfaces finished even and smooth complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 5mm thick ceiling plaster in cement mortar 1:3 on concrete surfaces finished even and smooth complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing new plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including scaffolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge. Make:- Asian Paints Apex suprema.
M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make:- Asian Paints Tractor suprema.
M&L for preparation of new surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete in Roof, floors (other than ground floors) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.
M&L for 40mm thick plain cement concrete type B-1 1:2:4 (nominal mix) using 20mm graded stone aggregate for correction of roof slab / roof padding making necessary slope etc complete all as specified and as directed by Engineer-in-Charge.
Supply only integral water proofing compound as approved.
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface and then providing 10mm screed bed with water proofing compound with required slope complete as directed :- (a) Applying bituminous primer @ 1.2 kg/Sqm on the prepared dry roof surface. (b) Laying 4mm thick APP membrane Plain finish weight not less than 3 to 4 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap and membrane shall be taken to the parapet through a fillet and shall be tucked inside up to height of 300mm.(c) Applying bituminous primer @ 1.2 kg/Sqm and applying a coat of bituminous aluminium paint over a coat of primer as the manufacturer instructions. Note : WPC shall be measured and paid separately under relevant item of this schedule. [Note : The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane].
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-Charge.
S&F rolled mild steel in roof trusses (framed), Vertical post , purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-290-Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description over 10cm in width or girth not other wise described complete all as specified and as directed by Engineer-in-Charge.
Dismantling Plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof coverings in roof covering complete all as specified and as directed by Engineer-in-Charge.
S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
S&F 0.50mm thick pre-painted galvalume aluminum zinc coating GI based Plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all complete all as specified and as directed by Engineer-in-Charge.
S & F Aluminium flat 40x6 mm in wind ties screwed on roof covering at any height as directed, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed by Engineer-in-Charge.
Demolition of Precast Concrete work built in Cement Mortar including all quoins arches pillars etc complete complete all as specified and as directed by Engineer-in-Charge.
M&L Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,complete all as specified and as directed by Engineer-in-Charge.
S & F in repair PVC (WSR) pipe 110mm dia any length as in weep holes fixed in PCC block masonary wall complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) tomatch the existing floors complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed by Engineer-in-Charge. Make for item No 30 to 33:- The subject items shall be executed through authorised applicator. The contractor shall beed to submit FDR of (25% of the quoted amount) and guarantee bond for 10 years against effectiveness of the treatment.
EXCEL ENGINEERING WORKS (BID ID -3038669)
M/s J. M. Enterprises (BID ID -3039084)
ANDAMAN PAINTS PVT LTD (BID ID -3039106)
AR CONSTRUCTIONS (BID ID -3039136)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .