SPL REPAIR TO BLDG NO 29 A TO D OR SINGLE ACCN INCLUDING PRS BLDG PLUS ADJACENT ROOM AT STN HQ AND SPL REPAIR TO BLDG NO SM 28 FPO OFFICE UNDER GE MIS MHOW

Amount

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' modular flyash brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering in cement mortar (1:4) 10mm thick first coat on fair faces of brick walls or concrete surfaces and 5mm thick in cm 1:4 second coat over first coat , mixed with water proofing compound as per manufacturer instructions, finishe fair and even without using extra cement all complete as specified and as directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick plastering in CM (1:6) finished even & fair all complete all as specified and directed.

Dismantling water tanks and removing to store Capacity of tank exc 500 and nexc 1000 litres complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR part I-1991 complete all as specified and directed.

Taking up or down existing steel tubing and connection fixed in any position 15 mm dia complete all as specified and directed.

Taking up or down existing steel tubing and connection fixed in any position 20 mm dia complete all as specified and directed.

Supply, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for15 mm dia complete all as specified and directed.

Supply, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for 20 mm dia bore complete all as specified and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed.

M&L for non skid/mat finish ceramic colour tiles 7 to 8 mm thick (square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified cerameic tiles 9 to 10 mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L for Granite 18-20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE

Rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed.

M&L for 22 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including cutting, rubbing and polishing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

All as per item No 20.00 above but as in skirting or vertical surfaces over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Cutting/grinding and polishing of existing Kota stone floor incl repairing (if required) for smooth finish complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed designer precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick (compacted thickness) sand cushion complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.(Window/ventilators) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame) complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for sewage line, manhole,drain, laying of cable etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated soil including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material to a distance n exc 50m and deposited where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drains complete all as specified and directed.

S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete as specified

S&F 105 x 60 mm size Pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate,hold fast etc., complete as specified

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed.

S&F 2nd class hard wood 35 mm thick Plain , framed factory made panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S&F 2nd class hard wood 35 mm thick Glazed and skeleton factory made shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR and as directed by GE/Engineer-in-Charge.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised stainless steel hinge pin, anodised and fixed, type B-21 complete .

S&F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S&F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S&F 150 mm size aluminium handles cast type, anodised ISI marked complete

S&F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S&F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

S&F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S&F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1:3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S&F mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith applying two coats of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specified and directed.

S&F 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm conforming to I S nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 as in soffits of ceiling and RCC Chajja/ Facia roof projections finished fair & even complete all as specified and directed.

M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation of surfaces of wall complete all as specified and as directed.

M&L for preparing of old surfaces of walls and applying one coat of cement base paint all complete as specified and directed.

Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc complete all as specified and directed.

M&L for applying 2mm average thick wall care putty water proofing on wall on old/new wall surfaces as per manufacturerer's instruction complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) as in plinth protection, finished concrete surfaces even and smooth without using extra cement complete all as specified and directed.

S&F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing waste fitting etc complete all as specified and directed.

S&F in repairs 15 mm dia bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete but fency type complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including seat cover etc. complete all as specified and directed.

S&F in repairs 10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed.

S&F in repairs PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete.

S&F in repairs brass chromium plated stop cock/ angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repairs over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed.

S&F in repairs 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed

S&F in repairs 15mm dia Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)

S&F in repairs harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specified and as directed.

S&F in repairs harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets of any thickness, including cover fillets complete all as specified and directed.

M&L for providing and fixing false ceiling complete in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200 mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying ceiling tiles of approvde make and specification , of size 600mm x 600mm x 6mm including calcium silicate boards of size 600mm x 600mm x 6mm complete all as specified and directed.

S&F in repairs Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repairs PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed.

S&F in repairs 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.

S&F in repairs 75mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed.

Demolition of reinforced cement concrete of any description for manhole cover, slab of septic tank & soak well etc complete all as specified and directed.

M&L for providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well,drain cover etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete.

S&F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, benty shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild stee wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed..

S&F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of walls and applying two coats of exterior weater coat paint paint over one coat of primer complete all as specified and directed. Make : Apex of Asian Paints or equivalent.

Cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide zinc chrome coat complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise description over 10cm width or grith and apply one coat of synthetic enamel complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with screws complete all as specified and as directed.

S&F stainless steel plate rack of size 900x750x250 made up of 1mm thick steel complete all as specified and as directed.

Dismantling fillets,rails,posts,rafters,purlins,etc under 40Sqcm in section complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainaital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mildsteel work of any descripton of any description not otherwise provided for complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortar in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and as directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and as directed.

S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and as directed.

S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process complete all as specified and as directed.

S&F modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and as directed.

All as per item no 107.00 as above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

S&F 100mm size MS mat/glossy finish handle complete as specified and directed.

S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete as specified and directed.

S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised

Cutting channels, grooves or rebates n exc 15cm girth,for inserting galvalume sheet on wall and trimming surface with or without reinforcement.

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 150mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.

S&F fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partition, with one or more rebates sections of approved tint including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and as directed.

S&F aluminium coloured power coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferring of edges for service window/counters complete all as specified

M&L for applying two coats of weather coat paint on new plastered surfaces of wall including preparation complete all as specified and as directed.

S&F Mild steel for roof trusses (framed), trussed purlins, crane gantires, rails and fasternings and heavy bracket framming (beam, tee, angle, channel or flat sections) including distance pieces, clats etc. and confirm to Gde- Fe-410-0 or Fe 310-0 including one shop coat of zinc chrome primer complete all as specified and directed.

All as per item No 121.00 above but except steel. Note: old steel obtain from dismantling will be re-used

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets of any thickness, including cover fillets complete.

S&F Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified. Note:Frame work for ceiling shall be measured and paid separately

S & F Anodised aluminium snap grid of size 605mmx605mm ,frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F PVC prelam sheet wall paneling of thickness 5mm consisting of panels having size 1.22 M x 2.44 M stuck on inner frame work of 50 mm wide strips of 5mm thick prelam PVC sheet of 600 Kg/cbm density manufactured by an ISO-9000 certified company. The strips should have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fix the strip to the wall vertically at an equal interval of 10” between two PVC strip. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be struck at the places where two panels are jointed, using solvent including dismantling of old wooden boarding complete all as specified and as directed

M&L cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations filling and mass concrete, under floor complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC FRLSH concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on Same board.

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on Independent board.

(f) One bell point controlled by one, bell switch 5 Amps

All as per item No. 129.00 above but using 2.5 sq. mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq. mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

All as per item No. 129.00 above but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified.

S&F Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified.

S&F Modular Bell push modular 6 Amps single module complete all as specified.

S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S&F in repair/replacement of lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings

S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S&F in replacement integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro /Philips / make specified in Particular Specifications as approved by GE

S&F in replacement LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Make:- Cat No LHEXACP7IN1W010 of Havells or equivalent make in Wipro/Philips / Bajaj / make specified in Particular Specifications as approved by GE

S&F in replacement Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Cat No : BIBWP 10W LED of Bajaj or equivalent make in Philips/ Wipro/Havells make specified in Particular Specifications as approved by GE

S&F in replacement energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 m long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make:-Cat No ENXT P 36L WH CR PC SD of Bajaj or equivalent make in Philips/ Wipro/Havells / make specified in Particular Specifications as approved by GE

S&F Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed. Make: Bajaj, Havells/Philips

M&L for sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

S&F in replacement flush mounting factory made Vertical TPN DB, 4 Way IP-43 Protection -IK 08, with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for TP/FP 100-125 amps G Frame MCCB as incomer and SP/TP MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCCB 4 pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for 125 Amps fixed type with breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge.

S&F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system, IP 43, IK 09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCB SPN 40 Amp 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length of down rods, with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Min air delivery 210 CFM with service value greater than 7.00 BEE. Five star rated, provide electrical connection from ceiling rose to fan terminal by providing flexible cable three core Copper conductor of size 23/0.0076 (3 Core x 0.50 Sqmm), ISI marked and write down MES Number on fan by black paint/Marker complete all as specified and directed by Eng-in-Charge.

S&F energy efficient exhaust fan of PVC body 225/230 mm sweep Ventil Air -DX green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted.

Taking down existing old existing unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Supply, laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 3.5 core x 50 Sqmm complete all as specified and directed.

Supply, laying and jointing GI pipe 'light grade' 50 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

M&L for clean and dry sand (un-washed) in trenches including spreading and levelling for cushioning of UG cable complete all specified and directed. Note: Punned thickness shall be measured and paid.

Supply and laying reinforced precast concrete cable cover, class LV, type 1 flat , size 250mm x 150mm x 40mm complete all as specified and as directed.

M&L for Earthing complete (in replacement) with galvanized steel earth plate electrode 60cm x 60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with the top edge of the earth plate not less than 1.50m below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No. 3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.50 m from earth plate is deemed to be included in rate quoted.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including non metralic rigid PVC conduit pipe/casing caping of size 25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including modular sunken anodised steel box for housing modular switch socket , regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for One light point controlled by one, one way switch 5 Amps

(a) One light point controlled by one, one way switch 5 Amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on Same board.

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on Independent board.

S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S&F in replacement LED ceiling light fittings 34/36 watt recess mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc complete all as specified and as directed. Make Jaguar Cat No. LSVR01S036XC, Crompton Cat No. LCTLRN-36-FO-CDL/ Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells Wipro /Philips/ make as specified in Particular Specifications as approved by GE

S&F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

M/S Sunshine Construction (BID ID -3287235)

M/S Parikshit Sharma (BID ID -3286972)