PROVISION OF HARD STANDING AND SHED ALONGWITH ASSOCIATED WORKS FOR SOLID WASTE MANAGEMENT AND CERTAIN MINOR WORKS AT AF STATION UDHAMPUR

Amount

Taking down shutters of any description exc. 1 sqm and n.exc 2 sqm each and removing from site complete all as specified and directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding but not backing complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground) complete all as specified.

Taking up or down 15mm dia steel tubing & connections, incl cleaning for refixing etc complete all as specified and directed.

Taking up or down 20mm dia steel tubing & connections, incl cleaning for refixing etc complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified & directed by Engineer-in-Charge.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, in any type of soil not exceeding 1.50 metre wide and exceeding 1.5 metre but not exceeding 3 metre in depth; for foundation, etc. and getting out complete, all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance exceeding 250 metre but not exc 500 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge.

Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge.

Brick work using old size bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4), complete all as specified.

Supply only integral liquid water proofing compound, ISI marked, complete all as specified and directed by Engineer-in-Charge.

Cutting holes into or through RCC/brick walls built in cement mortar not exceeding half brick thick for inserting angle/tee/pipe/ hold fast or similar purposes etc. and making good in cement mortar 1:3 or cement concrete 1:2:4, Type B-1 as required complete all as specified.

Broken bricks for loose filling with aggregates of gauge 80 to 150 mm in soakage pits/ soakage wells complete all as specified and directed by Engineer-in-Charge.

Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in foundation, filling & mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (nominal mix) type B-1(1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

Precast RCC type B-1 (1:2:4), using 20 mm graded stone aggregates landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel and drain finished even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete 1:2:4, type B-1 ( using 20 mm graded crushed stone aggregate ) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates, hold fast blocks, filling to pressed steel chowkat and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Precast RCC type B-0 (1:2:4), using 12.5 mm graded stone aggregates as in louvres and jallies and the like, 35 mm thick (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified.

Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not. Exc 200mm thick, and flat fair finished surfaces complete all as specified and directed by Engineer-in-Charge.

75 mm long butt hinges,cast brass,with mild steel hinge pin,bright polished and fixed,type B-11,complete all as specified and directed by Engineer-in-Charge.

M&L 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

M&L 2nd class hard wood clean sawn battens at 15 cm centres, exc 15 sq cm & n exc 25 sq cm,complete all as specified and directed by Engineer-in-Charge.

M&L 2nd class hard wood 25mm thick boarding in floors and skirting, planed one side, with butt joints and fixed with nails supplied and fixed,complete all as specified and directed by Engineer-in-Charge.

S&F 40mm dia, cupboad knobs with nut, screw & washer of brass, polished,complete all as specified and directed by Engineer-in-Charge.

S&F cast brass magnet catcher with plate size 25mmx65mm and suitable for shutter of 18mm thickness and fixed,complete all as specified and directed by Engineer-in-Charge.

Extruded brass handles,fabricated type polished of size 75 mm, ISI marked fixed with brass screw, complete all as specified.

Factory made PVC shelf/partition/shutter teak face colour for cupboard of required size consisting of panel of 18mm (+0.7) thick Celuka PVC Ply and for supporting the hold of Shelf/Partition and shall be provided 3 edges in size 18mm x 18mm as per required length. The front side of the ege visible in the front of the shelf/partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600kg/cum density manufactured by an ISO-9000 certified company, using solvent cemtn etc. complete all as per manufactured specifications, drawings adn as directed by Eng-in-Charge.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Mild steel work as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) quality confirming to grade Fe-410W-Gde E-165, complete all as specified.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and se-curing runners with holdfasts and brackets, complete all as specified.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., as door frames, and hanging; also fastening and fixing confirming to grade Fe-410-W(Gde E-250)quality A, complete all as specified.

Welded steel wire fabric supplied and fixed complete to wood or steel members of weight not exceeding 4 kilogram/ sq. m, complete all as specified.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates quality confirming to grade Fe-410W(Gde E-250,quality A ) complete all as specified.

Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified.

Rolled mild steel as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, quality confirming to grade Fe-410W(Gde E-250) quality -A, complete all as specified.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exceeding 10 cm long, dia of neck 5 to 10 mm, complete all as specified.

Stainless steel railing of 40mm dia hand rail made up of hollow steel pipe grade ASTM -A 304 including all necessary fasteners and fittings(required at site), Make: JINDAL or other equivalent make approved by GE, etc complete all as specified and directed by Engr-in-charge.

Stainless steel railing of height 130 cm with and including 5 Nos 15mm dia middle steel pipes and 40mm dia hand rail made up of hollow steel pipe grade ASTM -A 304 Make: JINDAL or other equivalent make approved by GE, etc complete all as specified and directed.

Stainless steel Master pillar of 80mm dia ,135cm height made up of hollow steel pipe grade ASTM -A 304 Make JINDAL or other equivalent make approved by GE including decorative stainless steel cap and ball , etc and match with existing finishinf floor,complete all as specified and directed by Engr-in-charge.

Stainless steel Master pillar of 80mm dia ,60 cm height made up of hollow steel pipe grade ASTM -A 304 Make JINDAL or other equivalent make approved by GE including decorative stainless steel cap and ball , etc and including cutting with hole & fixing with ground complete all as specified and directed by Engr-in-charge.

Stainless steel middle pillar of 40mm dia ,130cm height made up of hollow steel pipe grade ASTM -A 304 Make JINDAL or other equivalent make approved by GE including support hook for stainless steel pipe , etc complete all as specified and directed by Engr-in-charge.

S&F 12 mm thick toghened glas with etching as directed for partition inlcuding all necessary fasteners & fittings (required at site) complete all as specified and directed by Engr-in-Charge.

Taking down existing railing without damage of floor complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete 75 mm thick 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floors finished rough complete all as specified and directed by Engineer-in-Charge.

40 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate, finished even & smooth, as in floors, complete all as specified.

50 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate, finished even & smooth, as in floors, complete all as specified.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa in roof covering/cladding to wall,fixed with self tapping screws complete, all as specified.

M&L joint free non-skid coloured designer ceramic tiles(Square/Rectangular) area of each tile exceeding 0.18 sqm but not exc. 0.38 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as spfd. colour and design approved by Engr-in-Charge. Make:-Somany,Kajaria,Johnson,Nitco

M&L designer digital ceramic glazed coloured tiles as in vertical surfaces such as skirting ,dados etc with area of each tile exc.0.11 sqm and not exc. 0.18 sqm 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl. 10 mm thick plaster in CM 1:3 complete all as specified colour and design approved by Engr-in-Charge Make:- Somany,Kajariya,johnson,Nitco

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:4), including integral liquid WPC by wt of cement as per manufacturer instruction (NOTE : Supply only WPC will be measured and paid for separately), complete all as specified and directed by Engr-in-charge.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Rendering 05 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling,roof projection,chajja in cement mortar (1:3), complete all as specified and directed by Engineer-in-Charge.

Two coats of cement base paint (camouflage pattern) on new/undecorated wall surfaces/Jafri wall including preparation of surfaces complete all as specified and directed.

Three coats of white washing on new/undecorated walls surfaces, including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge.

Three coats of white washing on new/undecorated ceilling surfaces, including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plaster surface and apply two coat of exterior acrylic weather proof antifungal emulsion paint of approved brand and shade in camouflange pattern over a coat of primer all as per manufacturers instructions complete all as specified and directed.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Steel tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors,and cutting chessing in wall and making good, complete all as specified and directed by Engineer-in-Charge.

Steel tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors,and cutting chessing in wall and making good, complete all as specified and directed by Engineer-in-Charge.

M&L HDPE waste pipe of 32mm dia pressure rating 6 Kgs/Sq cm fixed complete to walls floors etc.

S&F in repairs single lever sink mixer(wall mounted) with 200 mm(8') long swivel spout connecting les and wall flanges complete all as spfd Make:- CERA Cat Part No.F1002531or equivalent approved model in Jaquar/ Marc/ Hindware.

S&F in repairs angle cock with wall flange size 15mm,complete all as specified and directed by Engineer-in-Charge. Make:-Cera Cat Part No.:-F1002201 or equavalent to Marc/Hindware.

S&F in repairs single lever basin mixer with 450 mm long braided connecting pipe ,complete all as specified and directed by Engineer-in-Charge. Make:-Cera Cat Part No.:-F1002451 or equavalent to Marc/Hindware.

S&F in repairs 600 mm long chromium plated towel Rack fancy type ,complete all as specified and directed by Engineer-in-Charge. Make:-Cera Cat Part No.:-F5003101 or equavalent to Marc/Hindware.

S&F in repairs single bowl Sinks made of stainless steel 1 mm thick 600x500 mm depth 255mm for kitchen or laboraory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, PVC flexible pipe of 40mm dia with threaded adopter confirming to class III from sink to nahni trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc, Make :-Cat part No : B4511207 of CERA or equavalent to Hindware /Parryware

S&F in repairs Double bowl Sinks made of stainless steel 1mm thick 600x500 mm depth 255mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, PVC flexible pipe of 40mm dia with threaded adopter confirming to class III form sink to nahni trap of approved brand including cost of materials, adhesive solution, inlcuding coupling and with a pair of suitable C.I brackets including painting the brackets with two coats of approved paint cutting holes in wall and making good the same etc, Make : Cat part No : B4513202 of CERA or equavalent to Hindware /Parryware

S&F in repairs polyamid braided connection(2 piece set) pipe 15 mm dia 450 mm long for hot and cold water to be fixed in WHB/Gyser , complete all as specified and directed by Engineer-in-Charge. Make:-Cera Cat Part No.:-F8070402 or equavalent to Marc/Hindware.

S&F in repairs PVC floor trap with PVC grating suitable for 75 mm external dia, ISI marked including jointing with solvent cement complete all as specified.

S&F in repairs PVC bends suitable for 75 mm external dia, ISI marked (IS:13592), complete all as specified.

S&F PVC bends suitable for 110 mm external dia, ISI marked (IS:13592), complete all as specified.

S&F in repairs PVC(SWR) pipes single sockets, in any length with rubber rings joints laid in trenches or in floors, 75 mm dia complete all as specified.

S&F PVC(SWR) pipes single sockets, in any length with rubber rings joints laid in trenches or in floors, 110 mm dia complete all as specified.

S & F Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors all as specified, of 100mm bore complete all as specified and directed by Engr-in-Charge

Cast iron cowl, ISI marked, suitable for 100 mm bore CI spun pipes , complete all as specified.

Concrete bed to drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2, complete all as specified.

Salt-glazed stoneware drain pipes, grade 'A', ISI marked, laid in trenches to required level or to falls and jointed in cement mortar, include all necessary extra joints, waste and cutting, complete all as specified, of size 150 mm bore.

Cutting into existing main holes for connecting new 150mm internal dia drain pipe, making good pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Engineer-in-Charge.

S&F in repair wash basin ,vitreous china ivory/superior colours oval type ,size 560x470 mm excluding pillar taps,waste pipe, including bracket,grating,complete all as specified and directed by Engineer-in-Charge. MAKE:Cat Part No:S2030104 of Cera or equavalent to Hindware/Parryware

M&L wooden flooring 8 mm thick with dovetailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions and fixed complete all as specified and as directed by Engineer-in-Charge. Make :- Action tesa/Pergo or equivalent as approved by GE.

MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 8 way SPN with 200 Amp rated bus bar 230 volt AC supply , complete all as specified and as directed. Make:CAT PART NO:507682 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCCB four pole 415 Volts 50 Hz 63 Amps rating with rupturing capacity not less than 36 kA, Ics = 100% Icu, adjustable thermal & adjustable megnetic settings with spreader links, copper reducer etc, complete all as specified and as directed. Make:Legrand /HAVELLS / SIEMENS/Schneider

MCB four pole 25 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic ,complete all as specified and as directed. Make:CAT PART NO:408698 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

S&F triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps, 415 volts complete all as specified and as directed. Make: Legrand / HAVELLS / SIEMENS/Schneider

Bus bar chamber 300mm Long iron clad with 04 Nos 200 Amps rated copper strips complete fixed flush on wall and making good the distrubed wall surfaces all as specified, required at site as directed.

S&F LED down light (SMD) of cap 12 watt single phase 240 volt, 50Hz suitable to work on ceiling or side of stair case complete including point wiring as per suitable size of flexible wire 1.5 sqmm with 5 amps switch, switch board complete all as specified and directed by Engr-in-Charge. make : Syska, cat part No SSK-DLS-4"-12 W or equivalent to Havells/Bajaj/Philips

Supply, laying , jointing , commissioning and testing cable (armoured) XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric cable (heavy duty) with stranded aluminium conductors, 1100 volts grade of size 70 sqmm ,3.5 core laid on walls/floors or in air with saddles and gutties, complete all as specified and directed by Engr-in-Charge

MAHAJAN TRADING CO

SHIVAE CONSTRUCTION

TARUN BUILDERS