WBPWD/EE/BIR/ NIeIRQ-01/2026-27

Fitting, fixing of ply wood racks for keeping of BU, CU and VVPAT of different polling stations made of 12 mm thick ply with 75 mm x 50 mm vertical posts made of wooden battens @ 1.20 m c/c with 2 nos longitudinal and tranverse directions bracing size 25 mm x 50 mm, fixing with nails, screws etc. The racks of each room consists of maximum 2 layers or 3 layers, up. to 0.600 m vertical clear distance of each layer. The width of the ply shall be 600 mm and l200 mm with no horizontal joint and reinforcing with new wood planks including cost of nails, screws etc. and mending good, the damages after completion of counting procedure including cost of all materials, labour, taxes and all charges complete as per drawing and direction of the E.I.C For 0.60 m x 0.60 m x 0.60 m (height) Box each layer

Hire and labour charges for making 125 mm thick brick work with (1:4) mortar and plastering (1:6) the new wall to match with existing wall and dismantaling the same after complition the purpose of the constraction with necessary mending the adjoining surface of the wall including removing the rubbish and cleaning the floor as before.

White washing including cleaning and smoothening surface thoroughly. All floors : (b) Two coats (to be done on specific instruction).

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality

Supplying, spreading and consolidating Stone Dust to a depth of 100 mm and above at desired density and C.B.R. as per Specification with power roller to proper gradient and camber including watering as necessary, and lighting. guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks and depressions by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants complete as per specification and removing the same material if required as per site after completion of the purpose.

Supplying Mazdoor for shifting of benchese, table and other equipments for arrangement of Strong room, counting hall etc. and levelling the ground for vehicle movement place and cleaning as when required and replacing the same at various rooms after completing the purpose including restoring all the venues in its onginal condition.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work.: PVC Pipes 20 mm dia

Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplyply of Plumbing Mistry & plumbing Helper