MTPS I - Civil Circle - Construction of toilet room with colour coated sheet roof for the use of Trainees on the rear side of security cum time office at MTPS I

Amount

Dismantling the existing brick wall and removal the debris away from the site as directed by the Engineer in charge including all labour charges, all materials, leads & lifts, transporting etc., complete.

Dismantling the existing PCC concrete surfaces for brick work and removal the debris away from the site as directed by the Engineer in charge including all labour charges, all materials, leads & lifts, transporting etc., complete

Chipping the existing wall surface and roughening the floor surface and disposing the debris away from the site as directed by the department Engineer in-charge including cost of all labour charges, lead, lift, etc, complete.

Providing PCC 1:4:8 mix using 40 mm HBG stone for foundation base concrete as directed by the department Engineer at site, including cost of all materials, all lead and lift, curing etc., complete.

Providing Brick work in CM 1:4 using chamber burnt class II bricks of size 9"x41/2"x3" as directed by the Engineer incharge including cost of all materials, labour charges, materials, curing, lead, lift, T&P's, etc., complete.

Providing RCC 1:2:4 for cover slabs using 20mm downgraded HBG metal as directed by the Engineer incharge including cost of form work, centering and shuttering, cost of all materials, labour charges, curing, all T&P, lead, lift, etc, complete but excluding cost of steel reinforcement.

Providing steel reinforcement of RTS/MS rods for cover slab including cutting, bending, binding, tying and placing in position as directed by the Engineer incharge including cost of steel, binding wire, labour charges, lead, lift, T&P's, etc., complete.

Plastering in CM 1:5,12mm thick for wall surfaces neatly as directed by the Engineer in-charge at site including cost of all materials, labour charges, lead, lift, etc, complete.

Supply, fabrication and erection of MS Angle of size 65x65x6mm for rafter, grip rods etc., including cost of steel members, bolts & nuts, transport charges, welding charges, fabrication, erection charges, charges for T&P,cost of all consumables, all labour charges, lead, lift etc., complete and as directed by the department engineer at site.

Supplying and fixing of colour coated metal roofing sheet of 0.47mm thick over MS structural steel frame with necessary screws for fixing and as directed by the Engineer at site including cost of all materials , all labour charges, scaffolding charges, safety appliances, lead, lift, all T&P's etc., complete

Dadooing the walls with ceramic glazed tiles approved make, colour, quality size of 300x450x8mm over 10mm thick C.M 1:3 bedding and pointing with same coloured cement in all for toilet walls including cutting chase in walls wherever required finishing neat, cost of all materials, labour charges, lead, lift, etc, complete.

Providing floor finish with vitrified ceramic anti-skid tiles of approved make, colour quality and required size and the thickness shall not be less than 6mm over 10mm thick CM1:3 bedding and pointing with same coloured cement in all floors for toilet including cutting chase in walls wherver required, finishing neat, including cost of all materials, labour charges, lead, lift, etc., complete and as directed by the Engineer at site

Supplying and fixing of white colour glazed wash basin of approved make and size with of 550mm x 400mm necessary fixtures such as 1 No. CP Nose pillar cock, waste coupling, 32mm waste hose, 1No.gate valve, 1/2” connecting hose and bottle trap etc., finishing the disturbed masonry neatly including cost of all materials, transporting, all labour, all lead & lift, etc., complete and as directed by the Engineer at site.

Supplying and fixing in position of white colour European type western water closet of approved make and size with double flapped seat, Chromium Plated angle valve, connecting hose, Health faucet with1.50m flexible hose, and 10 litre capacity PVC low level flushing tank with all internal fittings including cost of all materials, all lead & lift, all labour charges etc., complete.

Supplying and fixing of Laminated PVC door with frame panelled door shutters hollow type with 200x20mm panels with 1 mm wall thickness for panels and styles and top and bottom rails of suitable size with 2mm wall thickness suitably reinforced using MS angle/ Flats including cost of necessary Aluminum hinges and other furnitures and fittings including cost of transporting, lifting and fixing, cost of all materials, all lead & lift etc., complete and as directed by the Engineer at site

Providing weld mesh of size 7.5x2.5cm 10 gauge for ventilator as directed by the Engineer incharge including cost of all materials, labour charges, curing, lead, lift, T&P, etc., complete.

Supplying and fixing of 110 mm dia (4kg/cm2) ISI make PVC pipe for sewer line arrangements with all specials as directed by the Engineer at site including cost of cost of all materials, labours, all lead & lift, T&P ,etc., complete.

Supplying and fixing in position of gun metal gate valve of approved ISI quality as directed by the Engineer at site including cost of all materials, labours charges, all lead & lift, T&P etc., complete.

Supplying and fixing of ISI make UPVC pipe of size 25mm for water supply arrangements with all specials as directed by the Engineer at site including cost of all materials, cost of PVC tap, clamp, screws, Nail, all labours, all lead & lift, T&P ,etc., complete.

Colour washing two coats using white cement with approved quality to the interior and exterior cement plastered wall surfaces of building including preparing the surfaces for painting, cost of all materials, scaffolding charges, thorough scrapping the surfaces, all labour charges, all lead &lift, curing, all safety appliances etc., complete.

Painting the MS Structural steels and weld mesh with two coats of enamel paint over one coat of primer of approved quality and colour as directed by the Engineer at site including cost of all materials, all labour charges, all lead & lift etc., complete.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed cu. Conductor of 110v grade in suitable PVC rigid pipe open in wall and ceiling with PVC accessories in flush wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection for making good of open portion including cost of all materials, all labour charges, all lead & lift etc., complete and as directed by the Engineer at site for light point.

Supplying and fixing of 1x18W/22W- 2 feet tube fitting with LED tube with ISI mark as per specifications and as directed by the Engineer at site including PVC unsheathed copper leads from terminals to the fitting including cost of cables, all lead & lift, safety appliances etc., complete.

CMR ENGINEERING WORKS (BID ID -1324550)

M/S.MUNNISANDCOO (BID ID -1324591)