PROVISION OF CERTAIN MINOR WORKS AND SPECIAL REPAIR WORKS UNDER GE NORTH PATIALA AT PATIALA MILITARY STATION

Amount

Schedule 'A'Part -I (B/R SCHEDULE)

Total amount of Sch 'A' Part I (B/R SCHEDULE)

Schedule 'A'Part -II (E/M SCHEDULE)

Total amount of Sch 'A' Part II (E/M SCHEDULE)

Schedule 'A' Part-III (Misc B/R & E/M Schedule) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) .

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 5mm thick ACP sheet below & 5mm th frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including stainless steel wire mesh guage of 1.18mm aperature and to be fixed with aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf (d) Aluminium Door stopper of 150mm - 01 nos per leaf.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5X38.10X1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows complete in all respect as specified and directed.

S&F of venetian blinds screen fabric with 5% openness factor roller type for windows of colour/shade as approved by Ac cepting Officer complete fixed in position inclusive S&F of all accessories and hardwares for fixing and operation, all as recommended by manufacturer, all as specified incl taking down old curtain rods of any type complete in all respect as specified and directed. Make : Vista or Equivalent as approved by Accepting Officer.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed.

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light & dark tiles as approved,on vertical surfaces such as in skirting/dado etc ,length of each unit not less than 600 mm and height not more than 150mm, set and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Skirting should be flushed with the wall plastering.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow Dark/Light/HL or Sobaro Deep/Bright/Bright Decor) or equivalent from Kajaria/Somany as approved by AO

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Make : Johnson (Digital HD Tiles) (Barstow or Sobaro Deep) or equivalent from Kajaria/Somany as approved by AO

M&L for industrial vitrified tiles premium quality coloured tiles 300 X 300 mm and 10-12 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Make : Endura Tiles or equivalent as appoved by AO.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

M&L for toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make - Jaguar Cat Part No AHS-1553./Marc/Prima/Cera/Perryware or equivalent as approved by AO.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of Cast Iron long arm P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F. complete in all respect all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet wall hung EWC P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified and directed. Make : Cera (EWC-Compact, Seat Cover-Carona) or equivalent from Parryware/Hindware as approved by AO

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Concealed Cistern-Cento, Flush Plate-Cento) / Cera (Concealed Cistern-Chevron Cat No. - B1110101, Flush Plate-Cat No. B1120101-H Type)

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed. Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Parryware/Cera as approved by AO. Note : The items for counter will be measured and paid separately.

S&F Urinal pot with auto sensor sprinkler complete fixing accessories set of size 480 x 300 x 740mm including necessary fixing arrangements and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories complete all as specified and directed. Make : Jaguar, Cat No URS-WHT-132530/Cera/parryware or equivalent.

S&F vitreous china premium/1st quality urinal division plates/partitions of size 720X320X90 mm including S&F all accessories as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed. Make : Cera (Corvin) or equivalent from Jaquar/Parryware/hindware

S/F stainless steel soap dish, complete all as specified and directed.

S&F PVC Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer complete all as specified and directed. Make : Sintex or equivalent as approved

S & F Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 7mm thick PVC laminated gypsum tiles of size 595x595mm of approved design of make Acoster/Ploca/ Armstrong or equivalent as approved by GE all as specified & directed.

M&L for Factory made rubber moulded pre-cast cement concrete type B1 1 : 2: 4 (20mm graded aggregate) in kerb stone with plain fair faces, including chamfers, weathering throating etc and setting in cement mortar 1:4 complete with joints to match including necessary excavation embedding in the ground to depth indicated and tamping ground around and also for removing any surplus spoil to a distance n exc 50 mtrs complete all as specified and directed.

M & L coloured chequred cement concrete tiles 30 cm x 30 cm x 20mm thick,made of grey cement set and jointed in neat cement slurry with grey cement and pigments as in floors to match the shade over screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 for laying floor finished, complete all as spcified and directed.

S&F aluminium window (Casement & sliding) and ventilator shutters with 50 micron powder coating double shutters and shutters made and to be fixed including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds in inner shutters complete fixed in all respect as specified including supply and fixing following items and measured separately.

S&F Stainless steel butt hinges 150 mm long medium weight and fixed with screws complete all as specified and directed.

S & F CI floor traps with complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include embedding the floor trap in PCC block of size 300x300x250 mm block of PCC 1:2:4 type B-2, complete all as specified and directed.

S&F Stainless steel Dish rack, glossy finish for kitchen over all size 900mm x 760 x 250mm complete fixed in position as recommended by manufacturer with Stainless Steel screws/Fastners etc all as directed. Make : Vidhi or equivalent as approved by AO.

S & F of tube light fitting Self Ballasted LED Batten Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K, 4 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S & F Lamp holder with LED bulb 9 W incl flexible wire 0.5 sqmm copper cable complete all as specified & directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified & directed. Note: Fixing of Exhaust fan on wall with suitable size anchor bolt, making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.

M & L for precast concrete cable covers type 2 flat, size 250mmx150mmx40mm laid dry in trenches for cable protection all as specified and directed.

S&F GI pipe medium grade 40 mm passing through cables, walls , across the roads with proper clamps, nut & bolts including taking down complete all as specefied and dirceted.

Earthing complete with Galvanized steel earth plate 600 x 600 x 6.0 mm buried directly in ground (earth pit not less then 2.25 Mtr deep below ground level) with top edge of the plate not less then 1.5 Mtr below normal ground level connected togalvanized earth lead wire 4.0 mm dia by means of bolts ,nuts ,check nuts and galvanized iron or steel incl excavation and earth work, GI pipe light grade 25mm/40 mm bore for protection of GI wire /strip from earth electrode to and incl supplying and lying charcoal dust, common salt, PCC 1:3:6 type CI (using 20 mm graded crushed stone aggregate) as in chamber and MS angle iron frame 40 x 40 x 3mm and RCC cover 40 mm thick 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia. TMT bars @ 75mm c/c both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No. 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed

S & F tube light fitting self bllasted LED batten extruded thermoplastic body with PC diffuser in squuare LED batten18/20 W, 6500K 4 fit long and 3 core copper wire .5 sqmm copper cable complete all as specified and directed.

S&F MCBs 240/415 Volts 10 KA, MCB SPN 40 Amps finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. Note: (DB will be measured and paid separately under respective items of sch A)

S&F MCBs 240/415 Volts 10 KA, MCB SP 6 to 32 Amps finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. Note: (DB will be measured and paid separately under respective items of sch A)

Supply and fix LED mirror light with linear & compact 9 W mirror light with decorative greyend caps, polycarbonated body and ribbed diffuser of capacity 9 W complete all as specified and directed.

Supply and fix 1 X 10 Watt LED bulkhead lumanries polycarbonate body heat resistant prismatic glass cover speicfically designed gasket fitting complete all as specified and directed.

S & F LED ceiling light 2 ft x2 ft,36 suitable for grid ceiling complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Carefully taking down and refixing of 2 ftx 2 ft recess mounted LED luminaire in false ceiling after necessary cleaning and electric connection complete all as specified and directed.

M&L for making bore below the road(any type)/pcc/ for crossing the GI pipe light grade 40 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed.

M&L for galvanized steel tubing 40 mm light garde (ISI marked) inreplacement of old damaged steel GI pipe for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Supply and fix fully automatic star delta starter (Y-∆) for motor having capacity of 12.5 HP, suitable for 3- phase, 415 Volts, 50 Hz Squirrel Cage Induction Motors, full load current in Amps 18, relay scale 9-14 Amps with all components fixed and wired in sheet steel enclosure, confirming to IEC 60947-4-1 Low-Voltage Switch-gear & Control-gear, Contactors & motor starters, Continuous (S1 class) Contactor : 3-pole Utilization Category: AC-3 (suitable for squirrel cage Induction motor operations) conforming to IS 13947 Insulation Voltage (Ui): 690V Impulse withstand Voltage: 8KV Service temperature: upto 55deg. C Mechanical Life: 15 X 10^6 operations Coil Supply: 415V, 50Hz Overload relay - Bimetallic thermal Built in single phasing protection with 1 NO + 1 NC potential free contact. Timer (for Y/D starters) - 3 to 30 sec (Electronic) Degree of protection for Cabinet enclosure - IP 55 or superior confirming to IEC- 60529 Maximum operating rate - 30 start-stop cycle/hour Enclosure Type : 1.6mm (min.) sheet steel enclosure, properly pre-treated and stove enameled/Powder Coated Mounting : Wall/Surface mounting Make - Crompton/Siemens/L&T Note - All the items shall be guaranteed against faulty material, defective design & poor workmanship for a period of 12 months from the acceptance of the material . The materials becoming defective during the guarantee period shall be replaced free of cost.

Supply installation, Testing and commissioning LT feeder piller board as per designed and approved by GE outdoor type cubical panel board suitable for 3 phase 4 wire 415 Volts 50 Hz, of size not less than 1.0 X0.9 X0.5 mtr (LxBxW), suitable for mounting MCCBs upto 63 Amps factory fabricated, made of 3.0 mm thick CRCA sheet , for suitable size of copper bus bar CPRI approved and MS angle iron sectiom 40X40X6mm frame with front and back openable double door system with locking arragement louver and air vent gasket for manual flow of air with canopy, inner compartment made out of 2mm thick CRCA sheet duly compartmentalised suitable for fixing of star delta starter with lockable arrangement fixed on PCC foundation complete all as specified and directed. Note : PCC shall be measured and paid separately

S&F Lamp holder ,PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fix tube light fitting LED type integrated 9/10 watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed.

S&F LED bulb 9 watt complete all as specified and directed.

S & F Exhaust fan 300 mm sweep complete all as specified and directed.

Supply,installation and testing of minimum 5 star rated electric water heater (Geyser) metal body storage type of 20 ltrs capacity of Steel tank inclding 04 nos anchor fastining for mounting geyser and other nut,bolt and washers with 3 core flexible wire of size 2.5 Sqmm from Geysere to metal plug and socket complete all as specified and directed.

Suction Sweeper complete with motor of capacity 5 HP, pump & starter, mounted on trolley including nylon rope, hose pipe float etc complete all as specified and directed.

Supply and fix Submersible pump with motor 40 HP capacity 415 V 50 HZ verticle type 5/6 stage pump complete with accessories all as specified and directed.

Supply and fixing fully Auto matic star delta starter suitable for Submersible pumpset 40 HP 3 Phase 415 volts 50 C/S with relay range obtained from existing panel, connecting up and testing complete all as specified and direceted.

Supply and fix chlorine dozing verticle type mechanically operated chemical mixing pump capacity 200gm/hr incl 150 ltr capacity tank complete all as specified and directed.

Supply and fix Non clog vertical submersible pumps of capacity 5 HP with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance complete all as specified and directed.

Supply, installation, commisioning and testing of pumping set coupled with diesel engine 20 HP, air cooled, twin cylinders, rated speed 1500 rpm, self start both pump & diesel engine on common channel base frame with the help of flexible coupling, trolly made out of Structural Steel (FE 410-W grade E250) of suitable size, and all other accessories complete including battery of suitable capacity and copper leads all aspecified and directed.

Buttar Construction Co.

KG BUILDERS

AR CONSTRUCTIONS

M/S Mukesh Kumar Gupta

Arneja Builders

m/s panchmukhi builders

NORTON BUILDER