PROVN OF SPECIAL REPAIR TO REPLACEMENT OF ACC SHEET, CERTAIN MINOR AND REVENUE WORK UNDER GE SATWARI

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position including cleaning, removal and disposal of rubbish, waste materials from premises complete all as specified and as directed by Engineer-in-charge

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) terrazo dado from wall surface removing serviceble tiles to store and rubbish off premises complete all as specified.

Demolition of PCC in ground floor and paving n exe 15 cm thickness (Above or below ground level) complete all as specified and as directed..

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified.all as specified.

Excavation in any trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5mm in depth for foundation and manholes laying SGSW pipes and getting in any type of soil complete all as specified and as directed

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surfaces in any type of soil.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Surface dressing n. exc 15 cm deep in any type of soil complete all as specified and as directed.

Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and as directed.

Material and labour for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge

Taking down chowkat with shutter(without taking off shutters from the frames) n.exe 1.50 sqm including iron mongrey complete all as specified.

M&L Brick work with old size brick curved or straight on plan exc 6 m area radius built in C:M 1:6 in curved on plan to any radius complete all as specified.

M&L Brick work with old size brick curved or straight on plan n exc 6 m area radius built in C:M 1:6 in curved on plan to any radius complete all as specified.

M&L Brick work in cement mortar 1:6 , with subclass 'B' bricks, straight or curved in plan exceeding 6 m mean radius complete all as specified and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed. .

M&L for brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick built in cement mortat 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement including complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, finished rough without using extra cement including complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:4 on brick wall surface or concrete surface finished even & smooth (without using extra cement) including mixing of waterproofing compound etc complete. Note-WPC shall be measured and paid separately

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:4 on concrete surfacves/ chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and as directed.

M&L PCC 1:2:4 type C2 using ( 20mm aggregate ) as in post hole ,foundation bed concrete and mass filling complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to recive the floor tiles etc complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate laid in alternate as in sub base of floors/pathway/hardstanding finished even and fair to receive top finish complete all as specified and directed by Engr-in-charge.

M&L PCC 1:4:8 type-D2 (40mm graded aggregate) as in foundations, filling and mass concrete.sub base as in floors complete all as specified and as directed.

M&L RCC type B1, 1:2:4 (20mm graded aggregate) as in plinth beams , cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and as directed.

M&L RCC type B1, 1:2:4 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for providing, cement concrete type B1 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Material and labour for Plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in floor or paving 75mm thick and finished even and fair without using extra cement, all as specified .

Material and labour for Plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor 25mm thick and finished even and fair without using extra cement, all as specified .

S&F structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails, vertical post and fastenings, heavy brackets framing (Beam, tee, angle, channel, squre hollow section or flat section) including distance pieces, cleats etc complete all as specified.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Engr-in-Charge.Make:- Jindal ( JSW), TATA, SAIL.

Supply and fixing Pre-painted aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self sheeting with two corrugution side up, tapping screws complete all as specified and directed by Engr-in-Charge. Make:- Jindal ( JSW), TATA, SAIL.

M&L for Applying two coats of synthetic enamel paint on new steel surface over one coat of red oxide including preparation of new surface over 10 cm width or girth complete all as specified and as directed.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs complete all as specified and as directed by Engr-In-Charge.

Material & labour for mild steel framed work such as grills grating etc with ends of bars shouldered and or riveted etc conforming to fe 290 Gde E-165 complete all as specified.

Supply and fixing Sheet glass ordinary quality glass 3mm thick and glazed with oil putty or any types of beads in square n.exc 0.5 Sqm each pane complete all as specified. Make:Saint Gobain

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including priming surface with chalk whiting complete all as specified

Material and labour for two coats of oil bound distemper on new plastered wall surfaces including preparation of surfaces over priming coat and a coat of putty all as specified and directed.

M&L Form work to sides and soffits of floor or roof beams , beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs,landings and similar works : not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

M&L Form work to edges of concrete flats, treads,breaks in floors, window cills, concrete railing, openings in concrete walls, floors and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10cm but n exc 20 cm wide for rough finished surfaces of concrete complete all as specified and as directed.

S&F MS deformed or twisted bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per item no.51 but 6 mm to 8 mm dia complete all as specified and as directed.

S&F Factory made mild steel box type ventilator with side hung shutters including pintal hinges with 2 nos MS tower bolts of 150 mm size on each shutter , steel handle and stopper of Z section with sash bars dovetailed or welded ready for glass fixing, without guard bars/grills complete all as specified and shown in Drg No CEPZ/TD-325/07 dt 04-12-07 and CEPZ-TD-324/07 dt 4-12-07

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and as directed. .Make:Saint Goblin

Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15 mm thick screed bed in CM 1:4. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)

Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over 10 mm thick CM 1:4 all as specified. Make Somany, Kajaria (Sample as approved & Kept in GE's sample room)

Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge Make:- Jindal, TATA, Prakash Surya

Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge. Make:- Jindal, TATA, Prakash Surya

S&F Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F Pillar cock long neck with aerator 15mm dia cast copper alloy fancy type complete all as specified.Make:- Essco, Cat No-SQT-508KN or equivalent in kohler/ Jaquar.

S&F 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified.

S&F 110 mm dia PVC (SWR) type 'B' pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F 110 mm dia PVC (SWR) type 'B' pipes single socketed in any length with rubber ring joints using solvent adhesives laid in trenches or in floor with brackets etc complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F 75 mm dia PVC (SWR) type 'B' pipes single socketed in any length with rubber ring joints using solvent adhesives laid in trenches or in floor with brackets etc complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F 75 mm PVC (SWR) type 'B' pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F PVC (SWR) type B bends any radius provided with access door of 75 mm dia complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F PVC (SWR) type B vent cowl of 75mm dia complete all as specified and as directed. Make -Astral,Supreme, Finolex

S&F 75 mm bore UPVC (SWR) type B floor trap,plain with grating including jointing to waste pipe, all as specified. Make -Astral,Supreme, Finolex

S&F Urinal (CAPRIANA in white colour, ) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar/ Hindware/Artize.

M&L Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified amd as directed.

M&L for Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms). Make: Prayag, Sintex

S&F WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in Jaquar/ Hindware.

S&F PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces,complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010107 ( CABRINA) or equivalent in Jaquar/ Hindware.

S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.(ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

Supply and fixing for stainless steel Butt hinges, 100mm , complete all as specified and as directed. (ISI Marked)

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and as directed.Make:- Jainko or equivalent in kohler/ Artize/ Jaquar.

S&F angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:- Jainko or equivalent in kohler/ Artize/ Jaquar.

S&F Bib Cock with nozzle, cast copper alloy, chromium plated fancy type Quarter turn fix with iron pipe, 15 mm bore complete all as specified. Make :-Essco, Cat No:-SQT-512KN or equivalent in kohler/ Artize/ Jaquar.

S&F Overhead Shower 80 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including shower arm 240 mm long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange complete. ( For Shower Make:- Essco, Cat No-EOS-541RB.) & ( For Shower Arm Make :- Essco, Cat No- ALE- 536A) or equivalent in kohler/ Artize/ Jaquar.

M/L for cement concrete 1:3:6 Type C-2 using 40mm graded crushed stone aggregate to the bed of drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore complete as all specified and directed by Engineer-in-Charge.

M/L for salt glazed stone warer drain pipe laid in trenches and jointed in cement mortar 1:2 for 150mm bore of pipe grade 'A' complete as all specified.

M/L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified.

M/L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, water troughs and the like including slightly rounded chamfered angle and throughting etc all as specified and directed by Engineer-in-Charge.

M&L Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1: 2: 4 type B-1 smooth finished, and reforming benching as required

Mild steel angle iron as in doors frames complete of Gde Fe 290(Gde E 165 ) complete all as specified and as directed.

M & L for mild steel framed work as door and gates etc as per sample of angle or other section with gusset plates, rails, braces, MS Sheet etc, complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hookes and hinges or steel hanging fittings and hanging conforming to Fe 410 W (Gde - E-25) complete all as specified and as directed.Make :- Shivam Steel, Jammu

Material and labour for Precast factory made chequered designer tiles (Rectified interlocking tiles) 300x300 mm glazed top made in white cement and pigment base of thickness not less than 19 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set and jointed in neat cement slurry(colour and pattern as per sample kept in GE office as approved by GE) including 15 mm thick screed bed in CM 1:4. all as specified and directed by Engr-in-Charge.

S& F 110 mm dia Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

S&F PVC 'P' or 'S' traps of 110 mm dia includind dismantiling of old traps complete all as specified. Make -Astral,Supreme, Finolex

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.Make -Astral,Supreme, Finolex

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc; and cutting cheses for concealed water tubing or concealed conduit wiring etc. and making good, cutting n.exc 10cm girth in brick work complete all as specified.

S&F in repair angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:-Essco, Cat No- SQT-526KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement. Make:- Prayag, Cat No- FT-03, or FT-04 or equivalent in Essco, Cera.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in kohler/ Artize/ Jaquar.

Dismantling water tanks and removing to store of water storage tanks (Cap. 250 ltr to 500 ltr ) complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed.

M&L for preparation of old decorated plastered /concrete/ brick surfaces of walls ( with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.

M&L for providing precast cement concrete Type B0 1:2:4 (12.5 mm graded aggregate louvres and jallies, 25mm thick (measured solid), including all mouldings complete all as specifid and as directed.

Supply only Water proofing compound liquid.

M&L for ceramic coloured glazed tiles 300mm x 200mm x 6mm thick set, on vertical surfaces such as skirting /dados etc set and jointed in neat cement slurry/ paste and pointed in white cement with pigments.

M&L Screed bed or bedding layer of cement mortar 15 mm thick for layimg floor finishing in CM 1:6.

Precast reinforced cement concrete 1:2:4 type B-1 ( 20 mm graded crushed stone aggregate) nominal mix as in landings, cover slabs chullah hoods, chajjas, water troughs and similar articles with plain faces as specified in clause No 4.11.16 of SSR Part-I (2009), set in cement mortar 1:4 . complete all as specified and as directed by Engineer-in-charge

S&F Bib taps, cast copper alloy, chromium plated , fancy type long body, screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and as directed. Make :-Essco, Cat No:-SQT-512KN or equivalent in kohler/ Artize/ Jaquar.

S & F for mild steel Plates ( plain or chequered) channels , square cut or notched ( ordinary and counter sunk ) forming holes , without any attachment confirming Fe 410 W ( Gde - E-250 ) quality- B complete all as specified and as directed by Engr-In-Charge.

M&L for form work to rough finished square, rectangular or polygonal surfaces of concrete side of pillar posts struts, pier, column and stanchions incl finished surface complete all as specified and directed.

S& F for MS work as in Y shape angle iron horn like of any shape as directed including cutting and welding to shape required drilling holes notching for wire etc fixed in position complete conforming to Fe-290 Grade -165 complete all as specified.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Material and labour for precast factory made designer tiles (Rectified interlocking tiles) glazed top made in white cement and pigment base of thickness not less than 20mm in different colour and pattern (compressive strength not less than 250 kg/sqcm) set and jointed in neat cement slurry (colour and pattern as per sample kept in GE office as approved by GE) including 15 mm thick screed bed in CM 1:4 all as specified and directed by Engr-in-Charge

Supply & fixing of AC Single phase 240 volts 50 Hz, Ceiling fan of size 1200 mm sweep complete, 01 Star rating with canopy and hanging rod with all accessories incl nuts,bolts,clamps etc and provision of three core 1.5 sqmm copper cable from ceiling rose to fan or as directed by Engr-in-Charge : Make Crompton, havells,bajaj,orient.

Supply & fixing of Single phase 240 volts 50 Hz, Exhaust fan 0f size 450 mm sweep heavy duty with louvers complete, provision of three core 1.5 sqmm copper cable from ceiling rose to fan or as directed by Engr-in-Charge. Make Crompton, havells,bajaj,orient.

Supply & fixing Static Energy meter of Accuracy class 1.0, 240 v 50 Hz with backlit LCD Display of rating 10-60 Amp ( Measures & display KWH, V,I ,KW,PF Last month history of kwh & MD in KW) with special features like TOD ,Temper logging optical communication port & display in absense of power with transport hinge type box complete including provn of two core sub main copper wire of size 10 sqmm from Distribution box to meter all as specified and directed by Enger-in-Chrage : Make : HPL/SCHENIDER/SECURE/HAVELLS

Supply & Fix 1100 volt grade heavy duty cable PVC insulated aluminium conductor, served with innerseathing of PVC tape and overall PVC seathed in service of PC seathed in service connections suspended by insulting hangers not more than 1 meter apart including 4mm suspension wire. one twin core cable flat or circular of size 6 sqmm 2 core multistranded.

M& L Point wiring concealed type with 1.5 Sqmm PVC insulated and un-sheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 sqmm PVC insulated un-sheathed copper conductor cable as earth continuity conductor drawn through in and incl PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box made of primer incl 3mm thick ISI marked laminated sheet cover for fixing switches for one Light/Fan Point controlled by one no. piano type switch 5Amps single pole one way.

All as per item No 125 above but for one 3 pin 5 Amp socket outlet same board.

M&L for Switch piano flush button sibgle pole one way 5 Amps .

M& L for Socket outlet 6 Amps - 5 pin

S&F sheet metal enclosure for MCB's DBs single pole & neutral 240V AC with 200 Amp rated neutal bus bar suitable for 4 ways outgoing MCBs with IP - 42 protection complete all as specified & directed.

S&F MCB single pole 240V AC 6 to 32 Amps all as specified & directed.

S&F MCB single pole & neutral 240V AC 40 Amps all as specified & directed.

M&L for ceiling rose , 3 phase / PVC/ polycarbonate, isolated body.

Supply and fixing exhaust fan heavy duty 300/305 mm sweep, 900 RPM, 240 volt, AC, with & including louvers, mounting ring, MS rag bolts, nuts, washers etc and connected from ceiling rose/ connector with & including suitable size flexible copper conductor PVC insulated sheathed cord, complete.

S&F E-lite LED 18 watt tube light fitting with tube rod including its connection with 2 core flexible copper conductor cable with suitable size complete with all accessories all as specified & directed.

S & F Decorative Edge Lite linear and compact LED fixture with in-built electronic driver, luminaires 9 watt LED 4000K mirror light with decorative grey ends caps, polycorbonate body and ribbed opal diffuser and connection with 2 core flexible copper conductor cable of suitable size complete all as specified and directed.

M/S Raman Construction Co.

M/S PARAMJEET SINGH

M/S shakti steel industries