Karnataka

AOC

Works

Roads

Construction of Protection Wall at Land Sliding Portion Ch 4.10 Km of Hanbal - Devarunda Road Bettada Byraveshwara Temple Road Via Hodcahlli Maragunda in Sakleshpur Taluk

Public Works Department

PWD Division Office Hassan | Karnataka

Amount: ₹81.3 LCloses: 20 Feb 2026Closed

Timeline

Published11 Feb 2026
Closed20 Feb 2026
Awarded11 Feb 2026

Bids

1 Bid11 Feb 2026

#	Company	Amount	Status
1	HARISH KUMAR A R ₹71.0 Laccepted-aoc	₹71.0 L	accepted-aoc

Tender Value

₹81.3 L

EMD Value

₹1.6 L

Closing Date

20 Feb 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Bharath K.S

Office Number

Work Description

Construction of Protection Wall

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT33364

Reference Number

PWD/2025-26/RD/WORK_INDENT33364

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Hassan

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredContractors has to upload the EPF Registration

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN and Profit and Loss Statement i.e., 2020-21,2021-22, 2022-23, 2023-24, 2024-25 as per KW-3 Rs. 81.30 Lakhs

RequiredSimilar Work done certificate as per KW-3 i.e., Rs. 40.70 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredQuantities of Work 1. Earth work/Subgrade/Embankment-3077.00 Cum, 2.Concrete Work-PCC/RCC-347.00 Cum, 3. TMTSteel-6.90 MT, 4. WMM-53.00 Cum

RequiredLine of credit as per KW-3 Rs. 24.40 Lakhs

RequiredAssessed available tender capacity-AxNx2.5 -B should be greater than or equal to Rs.81.30 Lakhs

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. The Tender processing fee shall not be refundable.

Conditional tenders will not be accepted

The employer reserves the rights to reject one or all Tender without assigning any reasons and Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer is not responsible for any delay in accessing E-Procurement Portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Successful bidder has to furnish 0.1% of award contract amount as insurance during entering in to agreement.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractors should be registered with KPWD Class III and above Registration

To qualify for award of this contract, each tenderer should give all details and documents as per K.W-3 and Work should be carried out as per K.W-3 STD attached with tender .

The period of completion of this work is 4 Months & the eligible contractor should maintain the work for ONE YEAR after the successful completion of the project.

Contractors has to upload the EPF Registration and Contractors has to submit their labour EPF details with every Running Bill. Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

Estimate rates are excluding GST as per govt Circular No:FD 417 Exp-12/2024, Banglore Dtd:09.08.2024 and prevailing GST (18% of amount put to tender) amount is kept in form of Lumpsum in sanctioned estimate. Therefore amount put to tender and ECV amount are excluding GST. But the itemwise rates do not include GST. Hence GST will be paid separately for the Executed amount accordingly.

The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor have abide to any increase or decrease in GST during agreement period

The FSD payable at the time of executing agreement, will be refunded only after successful completion of Defect Liability Period

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum, the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

The Contractor should upload original scanned copy of Purchase invoice/RC Book/Sale Deed duly attested by Notary along with original purchase invoice/Ownership transfer in RC book/Hire or Lease Agreement duly attested by Notary along with original purchase invoice or RC book

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.10) only. Otherwise tender is liable for rejection.

The Conditions mentioned in Government Letter No: RD/20/TSY/2025(Part-1) Dated: 20.11.2025 should be strictly fallowed

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2020-21,2021-22 , 2022-23, 2023-24, 2024-25 (b) Mandating Satisfactory completion as a prime contractor for at least one similar work to an extent of value not less than Rs. 40.70 Lakhs (Updated to 2025-26 Price Level) (usually not less than 50 percent cost of the work)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2 (c) Executed in any one year i.e 2020-21,2021-22 , 2022-23, 2023-24, 2024-25 the following minimum quantities of work 1. Earth work/Subgrade/Embankment- 3077.00 Cum, 2.Concrete Work (PCC/RCC)-347.00 Cum, 3. TMTSteel-6.90 MT, 4. WMM-53.00 Cum (usually 80 percent of peak annual rate of construction)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

Capabilities of Vendor

ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity: (AxNx2.5 -B) should be greater than or equal to Rs.81.30 Lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (updated to 2025-26 price level) N-Number of years prescribed for completion of the works for which tenders are invited- 4 Months. B-Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 4 Months. (Period of completion of the works for which tenders are invited)

Others -- Submit information as per Section 3 of Tender Document

Financial Status

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e.,2020-21,2021-22 , 2022-23, 2023-24, 2024-25 (a) achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 81.30 Lakhs (Updated to 2025-26 Price Level) (Usually not less than the estimated annual payments under this contract)

Others -- Balance Sheets, Profit & Loss Statements certified from an Registered Chartered Accountant with UDIN

ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs. 24.40 Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually 30percent of the amount of contract) (The fomat should be as per KW-3 Bid document Section-3 Para 1.10)

Others -- Certificate from Schedule Bank in the prescribed form as per KW-3

Others

KPWD Class-III and above Registration Certificate

Others -- Valid KPWD Registration Certificate

Contractors has to upload the EPF Registration

Others -- Valid EPF Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹2,040

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

11 Feb 2026

Published

11 Feb 2026

Bid Opening

21 Feb 2026

Download Ends

17 Feb 2026

BOQ Preview

•

Construction of Protection Wall at Land Sliding Portion Ch 4.10 Km of Hanbal - Devarunda Road Bettada Byraveshwara Temple Road Via Hodcahlli Maragunda in Sakleshpur Taluk

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fu...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion ...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Chevron Boards - Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:20...

•

Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm...

•

Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of length, width...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-3 33364.docx

Tender Document • 0.95 MB

Lot-1955 SDMF Skp.pdf

Others - Randomization Copy • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

HARISH KUMAR A R

₹71.0 Laccepted-aoc