PROVN OF HT CABLE FROM GP-3 TO RMU AT PERIMTER AT MIL STN DAPPAR UNDER GE (P) DAPPAR

Amount

Schedule 'A'Section-I (EXINTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec I (ExInternal Electrification Works)

Schedule 'A'Section-II (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supplying, installing, testing and commissioningt HT 11 kV, 200 Amp outdoor type gang operated single air-break switch, triple pole, tilting type, vertical mounting, mechanically operated consisting of hot dip galvanised channel iron base having 3 Nos 11 KV Post type insulator in stack - 3 stack per phase, copper or copper alloy high pressure heavily tinned contacts, MS arcing horns capable of breaking the magnetizing current with operating mechanism worked from ground level complete with horizontal connecting square bar, GI pipe of size not less 25mm dia, medium grade and of suitable length as down rod levers coupling & operating handle with locking arrangement connected with new ACSR conductor (jumper) - set of 3 duly logged incoming and out going with steel nut bolts and washers incld. dismantling and taking out old switch and connections complete complying to IS 9921/1985 (Part I to IV) or its latest amendment all as specified and directed by Engr-in-Charge. NOTE - The quoted rate is deemed to be inclusive of cost of cutting, welding, drilling etc. and other jobs incld. cost of nut, bolts, washers, etc. minor items required for the efficient operation of GOD.

Supply and install drop out fuse HT 11 kV, 200 Amps fuse link consisting of channel iron base having 1 No 11 KV post type insulators in stack & 2 stack per phase complete with fuse carrier of SRBP tube with heavily tinned non ferrous metal parts and spring loaded phosphor bronze contact complete manufactured as per IS 9385 complete all as specified and directed. NOTE - The quoted rate is deemed to be inclusive of cost of cutting, welding, drilling etc. and other jobs incld. cost of nut, bolts, washers, etc. minor items required for the efficient operation of DO fuse unit.

Supply, laying in replacement, in trenches /ducts/fixing on pole/STR with suitable size of GI clamps made out of GI strip 32 mm x 6 mm, XLPE insulated, screened, earthed, PVC bedded, galvanised steel strip, electric power cable (heavy duty) of size 3 x 120 sqmm with aluminium conductor suitable for 11 kV (E) grade as per relevent IS including latest amendment for IS testing, commissionong along with S&F for HT cable route indicator for every 100 m with suitable PCC Foundation complete all as specified and directed including taking out of old burnt out cable alongwith cable covers. Note:- (a) Earth work, EHV cable cover, sand coushioning & GI pipe will be measured and paid seperately. (b) High voltage test to be conducted at site with suitable voltage before and after laying of HT cable and reading shall be recorded jointly and test report to be submitted in triplicate to the Engineer-in-Charge. The cost of the same shall be deemed to be included in the unit rate quoted above.

M&L for disc insulator porcelain vitreous brown 145 mm height & 225 mm dia ball and socket type two in series assembly with cast aluminium 4 U bolt tension hardware and tension clamps for conductors working pressure HT 11 kV complete all as specified and directed.

S&F in replacement heavy duty station class, Gap less type Metal oxide lightning arrestors, 12 kV of 10kA rupturing capacity complete with all fittings distribution class suitable for 11KV earthed system discharge capacity 65 Kilo Amps complete all as specified and directed. Modifications to support structure as per OEM Requirements shall be the scope of Contractor. No Extra payment will be entertained on this account

M&L in repairs Heat shrinkable outdoor type end termination cable jointing kit suitable for earthed 3 core 120/185 sqmm HT 11KV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.

M&L for providing & placing cable route marker ( indicator ) as per drawing as provided by the respective concerned MES office fduly marked with " Danger" mark, " GE (P) DAPPAR POWER CABLE" and arrow of route of cable made of precast RCC block in M-200 concreter of size 220x75X800mm having top width round shaped as per drawing including providing & laying reinforcement steel of 1 No.x10mm dia to steel main bar and 6nos.X8mm dia.to steel distrivution bars as per drawing including necessary excavation, form work of steel sheets, curing, finishing all the surfaces and placing in position at site incl. Fixing block by providing & laying 75mm thick PCC (1:4:8) on all vertical sides & bottom of precast RCC block as per approved drawing etc. Complete (Rate is inclusive of cost of form work and reinforcement steel)

HARISH SALES CORPORATION

R D Bansal

MAHESH KUMAR SINGLA CONTRACTOR

SEEMA ELECTRICAL