Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC 52 118 SECTOR 5 PRATAPNAGAR SANGANER JAIPUR 302033 | JAIPUR | RAJASTHAN | 302033 | ₹14.1 L Quoted ₹14.4 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹15.1 LRejected-Finance BLOCK NO 2 FLAT NO 17 FIRST FLOOR KENDRIYA VIHAR PARUTHIPATTU AVADI CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | ₹15.1 L | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹15.5 LRejected-Finance 61 1ST CROSS BEHIND RAILWAY GATE ANJANAYA TEEMPLE NEW LAYOUT BINNYPET BANGALORE 560 023 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560023 | ₹15.5 L | L3 | Rejected-Finance Not Lowest |
| 4 | L4₹21.2 LRejected-Finance 131 SANGAM NAGAR OPP NATIONAL SCHOOL SANGHVI PUNE 411027 | PUNE | MAHARASHTRA | 411027 | ₹21.2 L | L4 | Rejected-Finance Not Lowest |
| 5 | L5₹30.6 LRejected-Finance 03 PATEL STREET GANDHI NAGAR AVADI TIRUVALLUR TAMIL NADU 600054 | THIRUVALLUR | TAMIL NADU | 600054 | ₹30.6 L | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | SHANMUGA TRADERS L2 | LEO ENTERPRISES L4 | REENA INDUSTRIES L3 | SIVA ENTERPRISES L5 | BALAJI STEEL INDUSTRIES L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00RECANNING OF CHAIR WRITING [FD/280] | ||||||||
| 1.01 | Recanning to chair writing as per the requirement with white plastic cane 2 to 2.5mm wide gola type shah / primer brand weaving as per Godrej pattern including removing of unserviceable cane and cleaning the holes for recanning and polishing with french polish, removing of unserviceable cane, PVC toes derusting / rubbing old surfaces with sand paper and preparation of surface and making free from sun km Nos of knots in weaving shall be more than 10 Nos on back, vertical weaving lines on seat and back shall not be less than 22 lines vertical and not less than 4 lines nonzomamy and S&F new PVC toes to each chair complete all as specified and directed. | 62 | EACH | 300 ₹18,600 | 389 ₹24,118 | 290 ₹17,980 | 255 ₹15,810 | 315 ₹19,530 |
| 1.02 | Re-polishing of chair writing complete all as specified and directed. | 62 | EACH | 60 ₹3,720 | 130 ₹8,060 | 50 ₹3,100 | 125 ₹7,750 | 81 ₹5,022 |
| 1.03 | Supply & fixing of new front polished wooden leg and made of TW as in replacement of old unserviceable legs complete all as specified and directed. | 30 | EACH | 120 ₹3,600 | 109 ₹3,270 | 80 ₹2,400 | 255 ₹7,650 | 54 ₹1,620 |
| 1.04 | Supply & fixing of new rear polished wooden leg and made of TW and as in replacement of old unserviceable legs complete all as specified and directed. | 48 | EACH | 40 ₹1,920 | 109 ₹5,232 | 100 ₹4,800 | 345 ₹16,560 | 54 ₹2,592 |
| 1.05 | Supply & fixing of new side rail wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed. | 35 | EACH | 40 ₹1,400 | 160 ₹5,600 | 70 ₹2,450 | 155 ₹5,425 | 54 ₹1,890 |
| 1.06 | Supply & fixing of new foot rest (support at bottom) wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed. | 32 | EACH | 40 ₹1,280 | 59 ₹1,888 | 60 ₹1,920 | 215 ₹6,880 | 54 ₹1,728 |
| 1.07 | Supply & fixing of new bottom bush in repairs complete all as specified and directed. | 186 | EACH | 8 ₹1,488 | 6 ₹1,116 | 5 ₹930 | 25 ₹4,650 | 9 ₹1,674 |
| 2.00RECANNING OF CHAIR DINING [FD-16(M)] | ||||||||
| 2.01 | Recanning to chair dining as per the requirement with white plastic cane 2 to 2.5mm wide gola type shah / primer brand weaving as per Godrej pattern including removing of unserviceable cane and cleaning the holes for recanning and polishing with french polish complete all as specified and directed. | 260 | EACH | 350 ₹91,000 | 389 ₹1.0 L | 280 ₹72,800 | 255 ₹66,300 | 225 ₹58,500 |
Updated dates
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
5 Dec 2025, 6:00 pmClosed
CHIEF ENGINEER RND SECUNDERABAD
CHIEF ENGINEER RND SECUNDERABAD PICKET OPP JUBILEE BUS STATION SECUNDERABAD 500003
REPAIR AND MAINTENANCE OF WOODEN / STEEL FURNITURE, LOCKING SYSTEM AND OTHER CONNECTED WORKS AT CVRDE AVADI
2025_MES_730190_1
83242
Open Tender
Miscellaneous Works
180 days
AVADI CHENNAI
Class E
category d(i)
7 documents required · 7 mandatory
₹1,000
ASST GARRISON ENGINEER I RND AVADI
₹46,000
Yes
18 Feb 2026
10 Sept 2025
8 Dec 2025
10 Sept 2025
5 Dec 2025
21 Nov 2025
Amount
RECANNING OF CHAIR WRITING [FD/280]
Recanning to chair writing as per the requirement with white plastic cane 2 to 2.5mm wide gola type shah / primer brand weaving as per Godrej pattern including removing of unserviceable cane and cleaning the holes for recanning and polishing with french polish, removing of unserviceable cane, PVC toes derusting / rubbing old surfaces with sand paper and preparation of surface and making free from sun km Nos of knots in weaving shall be more than 10 Nos on back, vertical weaving lines on seat and back shall not be less than 22 lines vertical and not less than 4 lines nonzomamy and S&F new PVC toes to each chair complete all as specified and directed.
Re-polishing of chair writing complete all as specified and directed.
Supply & fixing of new front polished wooden leg and made of TW as in replacement of old unserviceable legs complete all as specified and directed.
Supply & fixing of new rear polished wooden leg and made of TW and as in replacement of old unserviceable legs complete all as specified and directed.
Supply & fixing of new side rail wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed.
Supply & fixing of new foot rest (support at bottom) wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed.
Supply & fixing of new bottom bush in repairs complete all as specified and directed.
RECANNING OF CHAIR DINING [FD-16(M)]
Recanning to chair dining as per the requirement with white plastic cane 2 to 2.5mm wide gola type shah / primer brand weaving as per Godrej pattern including removing of unserviceable cane and cleaning the holes for recanning and polishing with french polish complete all as specified and directed.
Supply & fixing of new top back rest portion wooden frame made of TW as in replacement of old unserviceable frame portion as per drawing complete all as specified and directed.
Supply & fixing of new front polished wooden leg (TW) and as in replacement of old unserviceable legs complete all as specified and directed.
Supply & fixing of new rear polished wooden leg and made of TW and as in replacement of old unserviceable legs complete all as specified and directed.
Supply & fixing of new side rail wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed.
Supply & fixing of new foot rest (support at bottom) wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
CHAIR DINING OFFICERS [FD/MAP-II/04]
Supply & fixing of new cushion top seat portion as in replacement of old unserviceable cushion top seat portion complete all as specified and directed.
Supply & fixing of new top back rest portion wooden frame (TW) as in replacement of old unserviceable frame portion complete all as specified and directed.
Supply & fixing of new front polished wooden leg (TW) and as in replacement of old unserviceable legs complete all as specified and directed.
Supply & fixing of new rear polished wooden leg (TW) and as in replacement of old unserviceable legs complete all as specified and directed.
Supply & fixing of new side rail wooden (TW) and as in replacement of old unserviceable side rails complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
CHAIR EASY [FD-229/201/17(M)]
Recanning to chair easy as per the requirement with white plastic cane 2 to 2.5mm wide gola type shah / primer brand weaving as per Godrej pattern including removing of unserviceable cane and cleaning the holes for recanning and polishing with french polish complete all as specified and directed.
Supply & fixing of new front / rear leg made of teak wood of size and shape and pattern duly polished in replacement of unserviceable / broken legs of chair easy complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
CHAIR VARANDAH [FD-256/19(M)]
Recanning to chair varandah with plastic cane 4mm wide gola type shah / primer brand after applying one coat of white synthetic enamel paint, minor welding where required on complete chair including removing of unserviceable cane, PVC toes derusting / rubbing old surfaces with sand paper and preparation of surface and making free from sun km Nos of knots in weaving shall not be more than 10 Nos on back, vertical / weaving lines on seat and back shall not be less than 22 lines vertically and not less than 44 lines horizontally and S&F new PVC toes to each chair complete all as specified and directed.
Supply & fixing of new front / rear leg including wooden handrest made of MS tube including welding and painting to match the existing surface as per existing in replacement of unserviceable / broken legs of chair easy complete all as specified and directed.
CHARPOY GI PIPE WITH NYLON NEWAR [FD-39(M)]
Supply & fixing in replacement of galvanised steel tube of size 32mm dia medium as in long rail for GI charpoy hard top complete all as specified and directed.
Supply & fixing in replacement of MS stiffer of size 45 x 5mm thick painted with two coat of black synthetic enamel paint by welding in existing long rail of the GI / MS charpoy complete all as specified and directed.
Supply & fixing in replacement of 32mm dia GI elbow fitted in existing section of GI charpoy complete all as specified and directed.
Supply & fixing in replacement of 32mm dia cheknut fitted in existing section of GI charpoy complete all as specified and directed.
BED PLY WOOD TOP / BED HARD [FD/E6/MAP/08(R)] & CHARPOY IP HARD TOP [FD/MAP/11/01]
Supply & fixing of 12mm thick commercial type BWR grade plywood top of bed plywood top in replacement of unserviceable plywood top including tightening of loose frame / assembling of loose components complete all as specified and directed.
Supply & fixing of head board including legs complete as shown on drawing No. 246. Legs, short rail and beading made of teak wood, inner battens of soft wood and plywood 3mm thick one side teak faced in replacement of unserviceable head board complete all as specified and directed.
Foot board complete all as specified and directed.
Supply & fixing in replacement of long rail made of shisham wood size 90 x 35 x 1920mm long for bed ply wood top complete all as specified and directed.
Supply & fixing in replacement of short rail made of shisham wood for bed ply wood top to match the existing complete all as specified and directed.
Supply & fixing in replacement of leg made of shisham wood / teak wood for bed ply wood top as per existing complete all as specified and directed.
Supply & fixing in replacement of mild steel square tube of size 32mm x 32mm x 5mm thick long rail for charpoy hard top by welding and two coat painting with primer complete all as specified and directed.
Re-polishing of bed ply wood top complete all as specified and directed.
Removing the old shoes and S&F PVC shoes to the legs of steel table complete all as specified and directed.
TABLE DINING 8 PERSON [FD-30/239/273]
Supply & fixing of new table made of pre-laminated particle board 18/19mm thick exterior grade in teak finish duly covered, table top made of sunmica laminate sheet 1mm thickness with PVC edging in black colour or approved colour all around as in replacement / broken top of table dining 8 person complete all as specified and directed.
Supply & fixing of new leg of table dining 8 person made of shisham wood of and shape / pattern as in replacement / broken leg complete all as specified and directed.
Supply & fixing, new front / rear rail of table dining 8 person made of shisham wood as in replacement of old front / rear rail complete all as specified and directed.
Re-polishing of table dining 8 person complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
TABLE DINING 8 PERSON [FD-30/239/273]
Supply & fixing of new table top made of pre-laminated particle board 18/19mm thick exterior grade, table top made of sunmica laminate sheet 1mm thickness and in reak finish duly covered with PVC edging in black colour or approved colour all around as in replacement / broken top of table dining 6 person complete all as specified and directed.
Supply & fixing of new leg of table dining 6 person made of shisham wood of and shape / pattern as in replacement / broken leg complete all as specified and directed.
Supply & fixing, new side rail of table dining 6 person made of shisham wood as in replacement of old side rail complete all as specified and directed.
Re-polishing of table dining 6 person complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
TABLE CENTRE 3" x 2" WOODEN [FD/274/FD-29(M)/235]
Supply & fixing of new table top made of pre-laminated particle board 18/19mm thick exterior grade in teak finish duly covered, table top of sunmica laminate sheet 1mm thickness with PVC edging in black colour or approved colour all around as in replacement / broken top of table centre 3 x 2 wooden complete all as specified and directed.
M&L for re-polishing of complete exposed surface of table centre after preparation of surface with french polish (one or more coats as required) complete all as specified and directed.
Supply & fixing, new leg of table centre person made of shisham wood / teak wood and shape / pattern as in replacement of unserviceable / broken leg complete all as specified and directed.
Supply & fixing, new front / rear rail of table centre made of shisham wood as in replacement of old front / rear rail complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
TEAPOY VERANDAH [FD-34/232/378]
Removing existing unserviceable top and supply & fix 18mm thick pre-laminated particle board with 4mm thick TW beading all around duly french polish for top of teapoy verandah including repair legs complete all as specified and directed.
Supply & fixing, new legs of 1st class teak wood and painting to match the existing surface as per existing in replacement of old unserviceable / broken legs complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
PEG TABLE [FD-25(M)]
Removing existing unserviceable top and supply & fix 18mm thick pre-laminated particle board for top of peg table including repair legs with 4mm thick TW beading all around duly french polished complete all as specified and directed.
M&L for re-polishing of complete exposed surface of table centre after preparation of surface with french polish (one or more coats as required) complete all as specified and directed.
Supply & fixing, new leg of table centre person made of shisham wood / teak wood and shape / pattern as in replacement of unserviceable / broken leg complete all as specified and directed.
Re-polishing of peg table complete all as specified and directed.
Supply & fixing of new PVC bottom bush in repairs complete all as specified and directed.
TABLE WRITING [FD-33(M)]
Removing existing unserviceable top and supply & fix 18mm thick pre-laminated particle board for top of table writing with table top of sunmica laminate sheet 1mm thickness and 4mm thick TW beading all around duly french polished complete all as specified and directed.
Supply & fixing, new leg of shisham wood / teak wood of and shape / pattern as in replacement of unserviceable / broken leg complete all as specified and directed.
Supply & fixing, new front / rear rail as in replacement of old front / rear rail of table writing as per existing complete all as specified and directed.
Re-polishing of table writing complete all as specified and directed.
TABLE DRESSING LADIES WITH MIRROR [FD-251]
Supply & fixing, 5mm thick looking mirror of size 1220 x 366mm with teak wood frame and 6mm thick BWR grade type BB ply wood to back side as in replacement of old unserviceable mirror with frame complete all as specified and directed.
Supply & fixing, PVC knobs complete all as specified and directed.
Supply & fixing, 6mm thick BWR grade type BB plywood as in back side of table dressing as in replacement of unserviceable plywood complete all as specified and directed.
Supply & fixing, 4mm thick sheet glass shutter as in replacement of unserviceable glass shutter complete all as specified and directed.
Re-polishing of table dressing ladies with mirror complete all as specified and directed.
Removing existing unserviceable top and supply & fix 18mm thick pre-laminated particle board for table dressing ladies with mirror complete all as specified and directed.
DRESSING STOOL CB [FD-252]
Supply & fixing, new leg of dressing stool made of shisham wood of and shape / pattern as in replacement of unserviceable / broken leg complete all as specified and directed.
Re-polishing of dressing stool CB complete all as specified and directed.
Re-canning of dressing stool CB complete all as specified and directed.
TABLE DRESSING GENTS [FD-230-3(M)]
Supply & fixing, 5mm thick looking mirror of size 760 x 380mm with teak wood frame as in replacement of unserviceable mirror with frame complete all as specified and directed.
Supply & fixing, 6mm thick BWR grade type bed plywood as in back side of table dressing as in replacement of unserviceable plywood complete all as specified and directed.
Re-polishing of table dressing gents with mirror complete all as specified and directed.
Supply & fixing, PVC knobs complete all as specified and directed.
SIDE BOARD [FD-241]
Removing existing unserviceable plywood on back side of side board and S&F, 9mm thick plywood commercial face for the rear side of side board complete all as specified and directed.
Removing existing unserviceable plywood on back side of side board and S&F, 12mm thick plywood commercial face for the rear side of side board complete all as specified and directed.
Removing existing unserviceable shelves from side board and S&F, 12mm thick commercial face plywood for shelf (one number) for side board complete all as specified and directed.
Re-polishing and necessary repair of side board (old pattern) complete all as specified and directed.
Supply & fixing, new leg of side board made of shisham wood of and shape / pattern as in replacement of unserviceable / broken leg complete all as specified and directed.
SOFA SET 5 SEATER (3+1+1) [FD-18/TP, FD/282]
Removing broken / unserviceable wooden arm from sofa set 5 seater and S&F, new wooden arm made out of (TW) of size 70 x 35 x 725mm as shown in drawing duly french polished with the existing shade complete all as specified and directed.
All as per Sl item No. 18.1 hereinbefore but new TW legs of size 70 x 35 x 530mm.
All as per Sl item No. 18.1 hereinbefore but new wooden bearers of size 40 x 40 x 305mm.
M&L for replacement of unserviceable / unhygenic seat and back of foam cushion of size 21" x 22" x 100mm thick of 32 density for sofa set 5 seater duly covered with tapestry cloth of approved quality and shade with polishing complete all as specified and directed. Note: (i) Rate of tapestry cloth shall not less than `250.00 per meter of standard width quality and shade shall be approved by the Engineer-in-Charge. (ii) The cover made of tapestry shall be provided with openable zip / chain.
Removing broken / unserviceable wooden long rail from sofa set 5 seater and S&F new wooden long rail as shown in drawing duly french polished with existing shade complete all as specified and directed.
Removing broken / unserviceable wooden short rail from sofa set 5 seater and S&F new wooden short rail as shown in drawing duly french polished with existing shade complete all as specified and directed.
Removing broken / unserviceable PVC bush from sofa set and S&F of new PVC bush as per sample approved complete all as specified and directed.
Removal of old and unserviceable fabric alongwith foam, lining cloth etc of sofa set 5 seater (FD-18) re-setting the GI springs with new cotton rope of 4mm dia, S&F seat frame 580 x 590mm made of 8mm MS rod and providing new upholstery for seat, back and arm rest with hessain cloth of medium quality, coir fibre and foam cushion 25mm thick, 40 density covered with tapestry cloth of approved quality and colour costing not less than `350.00 per metre, complete all as specified and directed. Note: Set of 05 Nos. i.e. 05 Nos. seat and 05 Nos. back will be measured as one set.
ALMIRAH STEEL BED SIDE / MEDIUM [FD-1032]
Removing the existing unserviceable clamps shelves and spot welding the shelves the almirah bed sides complete all as specified and directed.
Preparation of old painted steel surfaces i.e. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by AGE on all external and internal surfaces of almirah large steel complete all as specified and directed.
Removing existing old unserviceable locks from almirah steel large / medium / bed side and S&F of new locks steel made out of brass levers for 3 way locking device with suitable stainless steel keys in duplicate of standard complete all as specified and directed.
Removing existing broken handle from almirah large / medium steel and S&F new handle superior quality chromium plated of size 150mm matching with existing complete all as specified and directed.
Removing the existing unserviceable / damaged shelves for almirah bed side steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete all as specified and directed.
Removing the existing unserviceable / damage / broken legs for almirah bed side / medium, S&F with a new legs made out of 18mm sheet with applying one coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirahs complete all as specified and directed.
Removing the existing unserviceable two way locking device and S&F three way locking device with cover for almirah medium / bed side complete all as specified and directed.
Removing the old unserviceable door shutter and S&F the same measurement door shutter with new lock and handle including painting complete all as specified and directed.
ALMIRAH STEEL LARGE [FD-1031]
Removing the existing unserviceable two way locking device and S&F three way locking device with cover for almirah large steel complete all as specified and directed.
Removing the existing unserviceable clamps shelves and spot welding the shelves for almirah sides complete all as specified and directed.
Preparation of old painted steel surfaces i.e. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by AGE on all external and internal surfaces of almirah large steel complete all as specified and directed.
Removing existing old unserviceable locks from almirah steel large / medium and S&F of new locks steel made out of brass levers for 3 way locking device with suitable stainless steel keys in duplicate of standard size as per existing locks complete all as specified and directed.
Removing the existing unserviceable / damaged shelves for almirah large steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete all as specified and directed.
Removing the existing unserviceable / damage / broken legs for almirah large / medium, S&F with a new legs made out of 18mm sheet with applying one coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirahs complete all as specified and directed.
Removing the old existing unserviceable door shutter and S&F the same measurement door shutter with new lock and handle including painting complete all as specified and directed.
CONFERENCE TABLE (CONF-I) TP
Supply & fixing of new table top made of pre-laminated particle board 18/19mm thick of size 6' x 3' exterior grade in teak finish duly covered with PVC edging in black colour or approved colour all around as in replacement of unserviceable / broken top of conference table (CONF-I) complete all as specified and directed.
Supply & fixing of new legs of conference table (CONF-I) as in replacement of old unserviceable legs as per existing complete all as specified and directed.
TABLE OFFICE CLK STEEL [FD-1004]
M&L for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel including one coat of synthetic enamel paint as approved by AGE by spray process to achieve a uniform finish and to fix hard rubber shoe for legs complete all as specified and directed.
Removing the existing unserviceable drawers of table office clerk steel and S&F new drawer made of MS sheet CRC 1mm thick bent to shape to its original position with and applying one coat of red oxide primer complete all as specified and directed.
Removing the existing unserviceable top and S&F new top of pre-laminated particle board commercial 18mm thick exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top of table clerk steel / wooden writing table complete all as specified and directed.
Removing existing old unserviceable locks from table office clerk steel / table office officer steel / table typist steel and S&F new locks steel made out of brass lever with duplicate keys of standard size and pattern suitable to the existing locks and including drawers plastic handle complete all as specified and directed.
Removing the old shoes and S&F PVC shoes to the legs of steel table complete all as specified and directed.
TABLE OFFICE OFFICER STEEL [FD-1003]
M&L for cleaning / preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint as approved by AGE by spray process to achieve a uniform finish and to fix rubber toe for all legs complete all as specified and directed.
Removing the existing unserviceable drawers of table office officer steel and S&F new drawer made of MS sheet CRC 1mm thick bent to shape to its original position and applying one coat of red oxide primer complete all as specified and directed.
Removing the existing unserviceable top and S&F new top of particle board commercial 18mm thick exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top complete all as specified and directed.
Removing the old shoes and S&F PVC shoes to the legs of steel table complete all as specified and directed.
TABLE WRITING WOODEN [FD-275]
Removing the existing unserviceable top and S&F 18mm thick pre-laminated particle board for top of table writing with table top of sunmica laminate sheet 1mm thickness and 4mm thick TW beading all around duly french polished complete all as specified and directed.
Removing the existing unserviceable drawers of writing table wooden and S&F new drawer made of teak wood shape to its original position complete all as specified and directed.
Supply & fixing, PVC knobs complete all as specified and directed.
Re-polishing of table writing complete all as specified and directed.
TABLE COMPUTER TP
Removing the existing unserviceable top and S&F new top of particle board commercial 18mm thick exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top complete all as specified and directed.
Removing the existing unserviceable / damaged leg / frame and replacing with new wooden / steel as per existing table computer leg / frame complete all as specified and directed.
Removing the old shoes and S&F, PVC shoes to the legs of steel table complete all as specified and directed.
BOOK SHELVES ALMIRAH [FD-1028]
Removing the existing unserviceable locking device and lock S&F locking device and lock with cover for almirah large steel complete all as specified and directed.
Removing the existing unserviceable clamps shelves and spot welding the shelves the almirah sides for large / medium / small complete all as specified and directed. Note: Each shelf welding completely will be measured as a single unit.
Preparation of old painted steel surfaces i.e. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint on all external and internal surfaces of almirah large steel (size 920 x 485 x 1985mm) complete all as specified and directed.
CHAIR TUBULER STEEL WITH ARMS / WITHOUT ARMS [FD-75(M)]
Painting to steel tubuler frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms complete all as specified and directed.
Painting to steel tubuler frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms complete all as specified and directed.
Removing the existing unserviceable / damaged seats from chair tubuler steel with / without arms including 2mm canning and S&F of new seats complete all as specified and directed.
Removing the existing unserviceable / damaged back from chair tubuler steel with / without arms including 2mm canning and S&F of new back complete all as specified and directed.
Removing the existing unserviceable / damaged arm rest and S&F of new arm rest 1st class hardwood made to shape and painted with two coats of black paint synthetic enamel for chair tubuler steel with arms complete all as specified and directed.
Removing existing unserviceable rubber shoes from bottom of chair and S&F new hard rubber shoes to the bottom of chair complete all as specified and directed.
Removing existing unserviceable PVC / rubber plug form top of chairs and S&F new PVC / rubber plug to the top of chair complete all as specified and directed.
Removing the existing unserviceable seat (cushioned) from the following furniture and fix the new seat 12mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around to them in all respect of approximate size of seat 510 x 470 x 60 complete all as specified and directed.
Chair computer TP.
Chair cushion with arms TP / chair visitor / chair writing (map).
Chair revolving padded with arm high back TP.
Removing the existing unserviceable back from the following furniture and fix the new back 12mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping all around complete all as specified and directed.
Chair computer TP / chair revolving [FD E6 MAP 01].
Chair cushion with arms / chair visitor / chair writing (map) TP.
Chair revolving padded with arm high back.
Removing the existing broken bottom gas lift (up & down) hydraulic with pouch (maintenance free environmental friendly, chrome free cylinder tube shall be fixed in a MS black powder coated outer central column tube 38mm dia and 2mm thick. It shall have 100mm stroke length and gas pressure of 300mm force, should under go an impact test) from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch complete all as specified and directed. Note: Adjustable tilting mechanism to be designed with the following mechanism, forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released, 360 swivel mechanism to allow fluid lateral movement.
Removing the existing broken twin caster wheel from revolving chairs, computer chairs, tables TV trolley etc, S&F new fibre caster wheel complete all as specified and directed.
Removing the existing broken pedestal assy (injection moulded in black 30% glass filled nylone A 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the cators it is 600mm pitch-centre dia) from revolving chairs and computer chairs, S&F new fibre stem base complete all as specified and directed.
Removing the existing broken padded arm rest (black integral skin polyurethane finforced with MS insert it shall be scratch and weather resistant) as per sample from revolving chairs and computer, S&F new arm rest complete all as specified and directed.
Recanning of chair revolving (back / bottom) as per the requirement with white plastic case 2 to 2.5mm wide gola type shah / primer brand weaving as per Godrej pattern including removing of unserviceable cane and cleaning the holes for recanning and painting of chair complete all as specified and directed.
Removal of old and unserviceable fabric alongwith foam, lining cloth etc, of sofa set 5 seater (FD-18) re-setting the GI springs with new cotton rope of 4mm dia, S&F set frame 580 x 590mm made of 8mm MS rod and providing new upholstery for seat, back and arm rest with hessain cloth of medium quality, coir fibre and foam cushion 25mm thick, 40 density covered with tapestry cloth of approved quality and colour costing not less than `350.00 per metre complete all as specified and directed. Note: Set of 05 Nos. i.e. 05 Nos. seat and 05 Nos. back will be measured as one set.
CUPBOARD (CB) OPENABLE TYPE TP
Supply & fixing of new lock and key as in replacement of old unserviceable lock and key complete all as specified and directed.
Supply & fixing of new handle as in replacement of old unserviceable handle after applying one coat of synthetic enamel paint on cupboard, minor welding where required complete all as specified and directed.
CUPBOARD (CB) OPENABLE TYPE TP
Removing existing unserviceable top and supply & fix 18mm thick pre-laminated particle board for top of table writing with table top for sunmica laminate sheet 1mm thickness and 4mm thick TW beading all around duly french polished complete all as specified and directed.
Removing the existing unserviceable drawers of writing table wooden and S&F new drawer made of teak wood shape to its original position complete all as specified and directed.
Supply & fixing, PVC knobs complete all as specified and directed.
Re-polishing of table officer wooden complete all as specified and directed.
SHANMUGA TRADERS (BID ID -3480012)
REENA INDUSTRIES (BID ID -3481266)
LEO ENTERPRISES (BID ID -3480483)
SIVA ENTERPRISES (BID ID -3484501)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
BOQ_817476.xls
BOQ • 0.33 MB
83242_Tender.pdf
Tender Documents • 0.78 MB
Download all tender documents and submit your bid