REPAIRS TO SANITARY FITTINGS, FLOORS, JOINERY IN THE AREA OF KOHIMA LINE, NIRMAN VIHAR, MANOJ PANDEY, RS ROAD, TARAPORE ROAD, MM ROAD AND CERTAIN AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

All as per serial item No.1.00 here-in-before but except tiles.

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc incl dismantling of tile and rubbish off the premises complete all as specified and as directed.

Supply and fix for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete incl dismantling of scantling and rubbish off the premises all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

All as per serial item No.4.00 here-in-before but except batten.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work incl dismantling of scantling and rubbish off the premises all as specified and as directed.

All as per serial item No.6.00 here-in-before but except timber.

Material and labour for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

Dismantling of wooden boarding any description and in any position complete all as specified and directed.

Supply and fix Fibre board Eaves/Weather Boarding 18 mm thick or Feather Edged 15mm to 18mm thick and fixed with 30mm Lap, complete of approved arch pattern any size and shape all as specified and as directed.Make: Shera wall/Everest

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

All as per serial item No.12.00 here-in-before but except sheeting.

Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Dismantling structural steel work including doors, gates etc. complete all as directed.

Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240, with angle iron cleats or connecting pieces complete all as specified and directed.

Supply and fix mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old frame shutter complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix 3mm thick, plain sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each panes including hacking out old broken glass (any thickness size quality from metal frame including punching or drilling old glazing/springs clips and removing un-serviceable materials /rubbish off the premises all as specified..

Supply and fix in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fix in repair brackets for drapery/ curtain rod, decorative type, powder coated aluminium section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs drapery/ curtain rod of 25mm dia, decorative type, powder coated aluminium section complete all as specified and as directed.

Supply and fix in repairs antique rod of 25mm bore as in curtain rod decorative type section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs for antique double rod brackets to suit the curtain rod of 25mm dia, decorative type brass coated section complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix in repairs for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix in repairs for brass hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and as directed.

Supply and fix in repairs for brass wardrobe hooks (single) 50mm to 60mm complete all as specified and as directed.

Supply and fix in repairs for gate and shutter, hooks and eyes 100mm size brass wire type-1 complete all as specified and as directed.

Supply and fix for brass mortice lock, vertical type, size 100mm grade-1 of 4 levers with duplicate key complete all as specified and as directed.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Material and labour for 12mm thick mineral fibre false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 23.5 mm x 1.5 mm thick main tee, 25 mm x 23.5 mm x 1.28 mm cross tee and 23.5 mm x 23.5 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age.

Material and labour 6mm thick asbestos cement, corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Material and labour for french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained complete all as specified and as directed.

Material and labour for applying one or two or more coats of melamine polish with spray guns, compressor on old treated wooden wall panelling surface including preparation etc complete till fine glossy surface is obtained complete all as specified and as directed.

All as per serial item No.43 here-in-before but on wooden door, window surfaces.

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

All as per serial item No.46 here-in-before but on ceiling.

Material and labour for preparation of old treated plastered or unplastered surfaces of wall and applying one coat of acrylic distemper complete all as specified and as directed.

All as per serial item No.48 here-in-before but on ceiling.

Material and labour for preparation of old treated wooden surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per serial item No.50 here-in-before but on steel surfaces.

Material and labour for preparation of old painted wooden/asbestos surface on ceiling and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls using steel wire brush , sanding machine, rubbing ivory papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

All as per serial item No.53 here-in-before but on ceiling.

Material and labour for applying one coat of white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

All as per serial item No.55 here-in-before but on ceiling.

Material and labour for applying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

All as per serial item No.57 here-in-before but on ceiling.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete all as specifie and as directed.

All as per serial item No.59 here-in-before but on ceiling.

Material and labour for applying two coats of 100% acrylic exterior emulsion paint over a coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of lustre paint (water based) complete all as specified and as directed.

All as per serial item No.63 here-in-before but on ceiling.

Material and labour for preparation of old treated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for double charge coloured vitrified tiles 10mm thick (square/rectangular) polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for double charge coloured vitrified ceramic tiles of size 600mm x 150mm x 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and including dismantling existing tiling complete, all as specified.

Material and labour 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base to receive tile/claddings tops including demolition of existing cement concrete complete all as specified and directed.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water and removing rubbish off the premises complete all as specified and directed.

Material and labour Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc. including demolition of brickwork built in cement mortar and removing rubbish off the premises complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces in two layers (10mm + 5mm) mixed with integral water proofing compound @ 3% by weight of cement with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Supply only integral water proofing compound.

Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical surface, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

Supply and fix in repairs for vitreous china wash down water closet pan (pedestal pattern), white including plastic water closet seat closed pattern with flat bottom (with mild steel chromium plated or aluminised hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding, 10 litres capacity PVC low level flushing cistern, all internal fittings, inlet, outlet pipe connections etc complete all as specified and as directed.

Supply and fix in repairs for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket complete all as specified and as directed.

Supply and fix in repairs PTMT bib cock suitable for 15mm bore pipe without flange any colour high pressure screwed for iron pipe all as per Cat No.121-0 (Standard Series) of make Prayag or equivalent complete all as specified and as directed.

Supply and fix 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed

Supply and fix in repair bib taps chromium plated, fancy type for 15 mm bore pipe or for brass ferrule all as per Cat No.PIS-06H (Neptune Series) of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repairs pillar tap (old handle) PTMT suitable for 15 mm bore iron pipe, any colour, high pressure all as per Cat No.130-0 (Standard Series) of make Prayag or equivalent complete all as specified and as drected. (Minimum weight 110 gms).

Supply and fix in repairs stop cock (male thread, old handle) standard of PTMT suitable for 15 mm bore iron pipe,any colour, high pressure screwed for iron pipe all as per Cat No.141-0 (Standard Series) of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repairs angle cock (old handle) standard of PTMT suitable for 15 mm bore iron pipe, any colour, high pressure screwed for iron pipe all as per Cat No.144-0 (Standard Series) of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repairs bib tap long body (old handle) with flange PTMT suitable for 15 mm bore iron pipe, any colour, high pressure screwed for iron pipe all as per Cat No.124-0 (Standard Series) of make Prayag or equivalent complete all as specified and as directed.

Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix PVC (SWR) gully trap 150mm, setting and jointing with solvent cement complete all as specified and as directed.

Material and labour for two coats of Latex shield 2K make Berger or equivalent grade of pidilite in sunken portion , terrace or roof complete all as per manufacturer's instruction and as directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

Supply and fix in repairs brass spindle suitable for bib tap or stop valve, 15mm size,any type and in any position complete all as specified.

Supply and fix in repairs washer for wall mixer, bib taps and stop valve ,15mm size,any type and in any position complete all as specified.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

L.K.R.TIWARI CONSTRUCTION

M/s Akshay Contruction

SAGAR ENTERPRISES

K.S.JITE AND SONS

R J ENTERPRISES