PROVN OF SPECTATOR STAND FOR SHOW JUMPING AREA UNDER ZONE-III AREA AT JAIPUR MIL STATION

Amount

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and sheathed cable inclosed in concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings:-

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per Item No 1.00 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed.

S&F switch, piano type 230/250 volts complete all as specified and as directed.

Modular switch 1 way 6A, 1 module

Modular switch 1 way 16A, 1 module

S & F following modular type, 230/250 Volts grade (ISI marked) items, complete all as specified and directed:-

Modular Socket 6A - 2/3 pin combined 2 module

Modular Socket 6A/16A - 2/3 pin combined 2 module

M&L Ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply & fix 20W LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F in replacement of New Generation Energy Saving 120 W LED flood light powder coated PDC aluminium body with toughened glass vision having wide operating voltage range & lumen efficacy>100 lm/w.Surge protection upto 10 KV PF>0.95 temp 5700 K to 6500 K IP 66. Note:- Reducer including cutting welding etc if required at site for installing LED fittings shall be deemed to be included in quoted rates.

Supply and fixing of air circulator fans 230 volts single phase oscilating 600mm sweep suitable for wall mounting complete all as specified and as directed.

S&F factory made, sheet distribution boards, TPN 4 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete all as specified and as directed.

S&F factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :-

S&F in repair MCB 10 KA , C series 10 KA rupturing capacity thermal magnetic adjustable of the under mentioned type and rating :-

SP 5 to 32 amps

SPN 40 to 63 amps.

TPN 63 amps

M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor FRLS Cable ISI marked drawn through and including PVC rigid conduit medium grade of size 25mm bore and conduit accessories fixed on surface of wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and as directed. Note : 2 Run of 4 sqmm + 1 Run of 4 sqmm earth wire and 1 RM conduit will be measured one unit.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grade " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and as directed. Note:- PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Supply,lay,connect and commission LT underground cable XLPE of size 16 sqmm 4 core insulated screened PVC bedded galvanised steel strip armoured heavy duty with multi stranded aluminium conductor 1100 volts grade (ISI) marked laid in trenches, ducts, pipes or fixed on pole etc.

Excavation in trenches n.exc 1.5 meter wide and n. exc 1.5 meter in depth for foundation etc or for laying of cable etc and getting out in soft/loose soil.

Returning filling in soft/ loose soil including spreading levelling watering and well ramming in layers n.exc 25 cm depth.

Removing of excavated material (soil) to a distance n.exc 50 meter and depositing where directed at a level n.exc 1.5 meter above the starting point.

M&L sand cushioning to PVC underground cable with screened and washed sand and punning to provide a required cover. Note:- Punned thickness of sand shall be measured and paid for sand used in cushioning to cable.

M&L bricks for protection cover to underground cable (with old size sub class 'B' bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjaccent brick not exceeding 10 mm as directed.

Excavation in soft/loose soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long Diameter of neck Exc 12 mm not exc 20 mm complete all as specified and directed.

S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for preparing of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer over 10 cm width or girth complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M & L 100 mm Cement concrete type D- 2,1:4:8 (40mm graded stone aggregate) as in floor complete all as specified and as directed.

M & L 50 mm Cement concrete type B- 1,1:2:4 (20mm graded stone aggregate) as in floor complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6.

M&L for Granite (of any type) tiles 20mm thick, in skirting /dado machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including 10mm thick rendering in cement mortar 1:4 cutting and polishing complete.

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3150288)

MSR INFRATECH (BID ID -3149488)