Provision of Street lighting Arrangement at Various Roads and Places in Near Chowk Chauraha in Chowk Kali ji bazar Ward in Zone-06

Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 16mm thik) having 3mm thikness with single arm bracket (1 Mtr length) in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. as per direction of the E/I with Insulation Tape (Size of 5.0Cmx33M) this type of tape has a rubber-based coat and storng adhesiveas for 5 feet of electric Shock with Insulation Tape (Size of 5.0Cmx33M) this type of tape has a rubber-based coat and storng adhesiveas for 5 feet of electric Shock

Supply & fixing of 7mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. as per direction of the E/I with Insulation Tape (Size of 5.0Cmx33M) this type of tape has a rubber-based coat and storng adhesiveas for 5 feet of electric Shock with Insulation Tape (Size of 5.0Cmx33M) this type of tape has a rubber-based coat and storng adhesiveas for 5 feet of electric Shock

Supply & fixing of 12.50mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3mm. Top diaminium 150 mm, Bottom dia 310 mm base plate 25mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.with Insulation Tape (Size of 5.0Cmx33M) this type of tape has a rubber-based coat and storng adhesiveas for 5 feet of electric Shock

Supply and fixing of factory wired intcgral LED. Flood light Iuminaires with Pressure die cast aluminium housing wih toughend glassUV stabilized PC Cover and lenses built with mandatoy driver setsuitable for 170 to 200 Watt. Confirning io IP 66, IK 07 and above protection complete in all respect including Labour. 20400-24000.syslem, lumens, High power LED with lenses, >130, Lm/W, P.F.>0.95, THD <I0% at full load, CRI >70, Polted driver Set in Melal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-stsrt feature, 4 KV internal Surge Protection, & 10KV external SPD with 5 years warrantee

Supply and fixing of LED Street light Fitting with mandatory driver set having Pressure die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 140 Watt. to 150Watt.Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved including Labour. with 40/76 three core Flexible wire for Connection fitting to D.B, Connecting Plate suitable MCB, Connection etc 13200-15600 system lumens, High Power LED with lenses, >130Lm/W, PF>0,95, THD <10% at full load CRI > 70..Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and restart feature, 4 KV internal Surge Protection, & 10KV external SPD with 5 years warrantee

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.as per direction of the E/I (a) 16sq. mm 4 core

(b) 35sq. mm 3-1/2 core

(c) 50 sq. mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/I (a) 16 sq. mm

Supply and burring of safe Earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm inner pipe 25, terminal Dia 12 mm, outer GI Pipe of 16 swg and inner GI Pipe of 12 swg with hot Dip Galvanization up to 100 micron filled with crystalline conductive Mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I frame with hinged Cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I strip will be extra) as per direction of the E/I

Repair of road & Tiles as per side required

S/L of 2.0” PVC/HDPE pipe as per direction of the E/I

Boaring (Buggi) for Cabling work below 3.5mt ground level including HDPE Pipe

S/F 40Amp. TPN automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO-100 series with contractors HRC fuses isolating switch metering instrument & instrument box with CTS etc. in case of TPN, complete in all respect. as per direction of the E/I

Dismantling of 9.00/11.00 mtr. Steel tubular Pole Including bracket & fitting