SPECIAL REPAIR TO ROAD IN THE TRACK BETWEEN THE SENTRY POST NO 01 TO 07 AT RESTRICTED AREA UNDER GE (SOUTH WEST) NEW DELHI-03

Amount

M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces, depth exc 50mm and n.exc 100mm deep and area exc 400 sqm complete all as specified and as directed.

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces, depth n. exc 50mm deep and area n. exc 400 sqm complete all as specified and as directed.

M&L for WBM 7.5cm thick (compacted thickness) with Granite, trap or basalt stone of grading 2 (63mm to 45mm size) or grading (50 to 20mm size) spread rolled and consolidated with 8 to 12 ton power roller to gradient and camber required complete all as specified and as directed.

M&L for Laying and compacting 75mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MORTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and as directed

M&L for preparing unsurface WBM/WMM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, Unsurfaced Water bound macadam, complete all as specified and as directed.

M & L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm, using bituminous primer VG-10, complete all as specified and as directed .

M&L for Premix bituminous, macadam with paving bitumen VG-30 not less than @ 4 % by weight laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm or less) as filling of pot holes and patch repair complete all as specified and as directed.

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness , using paving bitumen VG-30 with 5.5% binder content by weight of total mix spread by means of self propelled mechanical spread/paver rolled and compacted to required camber and gradient by using tandem vibratory steel wheel static steel wheel and pneumatic tyre rollers min capacity 12 ton, complete all as specified and as directed.

Surface dressing as in berms etc n.exc 15cm deep in soft/loose soil complete, all as as specified and directed.

M&L for preparing bituminous surfaces of road and marking 1.5mm thick centre line, stop lines, dashes, arrows etc. and the lines n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided, complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for painting of two coats of synthetic enamel paint over kerb stone in white/Yellow/black shade including priming coat after preparation of new surface laid as per design approved complete all as specified and as directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and as directed.

S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300 mm) type B1 complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 100 thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete all as specified and as directed.

M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming IS-15685-2006 of 60mm thickness M-35 Grade, complete all as specified and as directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as finishing concrete surface, as in coping, including slightly rounded or chamfered angles laid to shape and slope surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed.

S&F for 110mm bore PVC (SWR) pipe, single socket, in any length, with rubber ring jointing with solvent cement or adhesive laid in trenches or in floor, complete all as specified and directed.

Vishal Traders (BID ID -3518331)