Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.8 LAccepted-AOC 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Low | |
| 2 | L2₹47.2 L+₹3.1 L (6.93%)Rejected-AOC | L2 | Rejected-AOC High | |
| 3 | L3₹47.4 L+₹3.3 L (7.55%)Rejected-AOC | L3 | Rejected-AOC High |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jaiswal, IDSE, CWE Chandimandir
HQ CWE Chandimandir
CA NO. CWE/CHD-52/2022-23 REPAIR/ RESURFACING OF ROADS IN K AREA AND N AREA UNDER GE CHANDIGARH
2022_MES_561626_1
CWE/CHD-52/2022-23
Open Tender
Miscellaneous Works
Item Rate
HQ CWE Chandimandir
Class C Category a(i)/a(v)
8 documents required · 8 mandatory
₹1,000
Yes
GE Chandigarh
₹1.1 L
Yes
24 Jan 2023
5 Nov 2022
16 Dec 2022
5 Nov 2022
12 Dec 2022
28 Nov 2022
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and not exceeding 50mm deep complete all as specified and directed
M&L for 7.5 cm thick (compacted thickness) WBM, with Kankar or laterite coarse aggregate of grading 2 (63 to 40mm size), spread rolled with power roller 8 to 12 tonnes and consolidated to gradient and camber required complete all as specified and directed.
M & L Preparation of unsurfaces WBM by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming coat conforming to clause 502 of MORT&H Specification for Road and Bridge work (Fifth Revision) with cationic bituminous emulsion SS1 grade conforming to IS-8887 (latest edition) @ 7.5 kg/10 Sqm using primer distributor which shall be self propelled or towed bitumen pressure sprayer complete all as specified and directed by engineer-in-charge.
M & L for applying evenly a tack coat conforming to clause 503 of MORT&H specifications for Road & Bridge works (Fifth Rivision) with cationic bituminous emulsion RS1 grade, confirming to IS 8887 (latest edition) @ 2.5Kg/10 Sqm using primer distributer which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed
M&L for Bitumenous concrete (BC) 30 mm thick (consolidated thickness) layer conforming to clause 507 of MORT&H specifications for Road and Bridge work (Fifth Revision) including cost of coarse aggregates, fine aggregates, filler, with 5.5% binder (VG-30) contents by weight of total mix, crushed aggregate of grading 2, anti stripping agent, warm mix additives (quantity, quality and grade as per the approved job mix formula) etc, cleaning and pre-heating of the mineral aggregate, filler & bitumen of specific temperature throughly mixing with binder of specified bitumen content, anti stripping agent, warm mix additives as per mix design in hot mix plant (batch type), carrying the hot mixed materials by means of tipper, trucks or any other approved and and suitable arrangements, laying and hot premixed materials over the prepared surface by means of paver finisher including manual operation as and when required for proper grade, level and camber through rolling with power roller 8 to 12 tonnes smooth wheeled, vibratory and tandem roller with necessary hand packing and pinning to give an even surface including running expense of all plants and machineries, inclusive of proper traffic control during laying to the satisfaction of Engineer-in-charge, required quality control tests at required interval etc complete in all respects complete all as specified and directed
Notes : (i) The contractor shall quote the rate against item considering 5.5 % VG-30 bitumen content. Job Mix formula as per clause No. 505.3.3 of MORT&H specification for road and bridge work (Fifth Revision) for bituminous concrete shall be got designed from NIT/CTL/Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 5.4 % by weight of total mix as per clause 507.2.5 of MoRT&H specifications (Fifth Revision).(ii) The cost of materials, transportation, Job mix formula form lab and testing charges for various tests as required are included in the unit rate quoted by the contractor. (iii) Cost of Filler i.e. rock dust, hydrated lime or cement is deemed to be included in unit rate. (iv) if qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs. 45.00 Per KG and if qty of binder contents is more than the qty as specified is respective items of BOQ no adjustment shall be made. (v) After spreading of mix as per clause 507.4.7 of MoRT&H specification entire surface during the operation shall be rolled with road roller 8-10 tonnes (smooth wheeled) followed with vibratory road roller of 8-10 tonnes static weight, followed by finish rolling with 6 to 8 tonnes smooth wheeled tandem roller as per clause no. 507.4.8 of MoRT&H specifications (Fifth Revision) and the cost of the same shall be deemed to be included in the quoted rate.
M & L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm paving bitumen (VG-10) putting in premixed bituminous macadam, well rammed and sealed with binder paving bitumen (VG-30) 9.8 kg per 10sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.
M & L for providing, laying & Compaction of bituminous, macadam (BM)compacted thickness 50 mm conforming to clause 504 of MoRT&H specification for Road and Bridge works (Fifth Revision) using mechanically crushed stone aggeagates and granual material etc of grading II as per Table 500-7 of MORT&H Specifications for Road and Bridge Works (Fifth Revision) premixed with bitumenous binder Bitumen grade VG-30 @3.5% (percentage by weight of total mix) prepared in Batch type Hot Mix Plant transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and allignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density complete all as specified and directed by Engineer-in-charge. Notes : (i) The contractor shall quote the rate against item considering 3.5% VG-30 bitumen content. Mix Design for Bituminous macadam shall be got designed from NIT/CTL/Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 3.4% by weight of total mix as per clause 504.2.4 of MoRT&H specifications (Fifth Revision). (ii) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs. 45.00 Per KG and if qty of binder contents is more than the qty as specified is respective items of BOQ no adjustment shall be made.
M & L for 2 mm thick, white/yellow hot thermoplastic road marking paint, confirming to BS standards 3262 with 20% of glass beads (intermixed) spread and laid by special applicator Machine at desired temperature all as per manufacturer instructions, painting as in strips (continuous or breaking) complete all as specified and directed.
Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions etc. complete all as specified and directed
Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
S&F in repair convex mirror minimum 100cm in dia outdoor type, body material- Polycarbonate, acrylic and mirror thickness not less than 3mm for traffic security purpose mounted on 2 mtr long SS pipe Gde 30G fixed with nut bolt and adjustable brackets/clamp system including necessary excavation and embeded in cement concrete type B1 (1:2:4) (20mm graded crushed stone aggregate) complete as per specification and directed.
M/s DATAAR BUILDERS
shree balaji builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .