For Shifting of 33 KV / 11 KV / LT Line / DTR Shifting Work 1st Call. P. A. C. 4995289.00 on Electrical SOR 01-01-2024 SOR and Non SOR, Completion period 365 Days (i/c rainy season)

For Shifting of 33 KV / 11 KV / LT Line / DTR Shifting Work at Different Locations Under PWD E/M Sub Division M-1 Bhopal (Detail Schedule Attached)

SECTION 4

BILL OF QUANTITIES (BOQ)

General Description of work : For Shifting of 33 KV / 11 KV / LT Line / DTR Shifting Work at Different Locations Under PWD E/M Sub Division M-1 Bhopal 1st Call. P. A. C. 4995289.00 on Electrical SOR 01-01-2024 SOR and Non SOR, Completion period 365 Days (i/c rainy season)

Probable Amount of Contract :

(Rs. In Figure) :-

(Rs. In Words) :-

SOR Item No.

Supply of support for overhead line RS joist of I.S. standard including drilling of required hole etc. complete as required.

Supplying and drawing all aluminium alloy conductor (AAAC) of approved make conforming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any)

Supplying, drawing and testing of XLPE insulated covered aluminium conductor of approved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (if any) etc.

Supplying and drawing guard wire/earth wire/bearer wire 13 sq mm (4mm. dia) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting & cradle etc. as required and clearing of obstacles (if any)

Supplying and drawing guard wire/earth wire/bearer wire 18.62 sq mm (4.87mm. dia/6swg) G.I. including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting & cradle etc. as required and clearing of obstacles (if any)

Supplying and erection of guards for existing overhead lines as required including split insulator required as per specification:

Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole of length 7 metres but not exceeding 10 metres in cement concrete 1:3:6 (1 cement : 3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling etc. as required.

Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole of length exceeding 10 metres but not exceeding 15 metres in cement concrete M-10 (1 cement:3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling etc. as required.

Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole strut in cement concrete 1:3:6 (1cement:3coarse sand: 6 aggregate 40mm nominal size) foundation including excavation and refilling and secured with holding clamp, nuts and bolts, etc. as required.

Supplying and erection of stay set complete with 19/20mm.dia 1.8 metre long stay rod, turn buckle, anchor plate of size 300mm x 300mm x 7.5mm thimble stay clamp, bow tightener, 7/4.00 dia G.I. stay wire etc. in cement concrete M-10 (1 cement: 3 coarse and: 6 granded stone aggregate 40mm nominal size) (concreting 0.30 Cu Mtr. per stay) foundation including excavation and back refilling etc. as required.

Supplying and erection of stay set complete with 16mm.dia 1.8 metre long stay rod, turn buckle, anchor plate of size 200mm x 200mm x 6.0mm, stay clamp, bow tightener, 7/3.15 dia G.I. stay wire etc. in cement concrete M-10 (1 cement: 3 coarse and: 6 granded stone aggregate 40mm nominal size) (concreting 0.30 Cu Mtr. per stay) foundation including excavation and back refilling etc. as required.

Supplying and erection of 11KV (5 KN) polymer pin insulator complete with long steel head G.I. pin, nut, washer etc. as required.

Supplying and erection of 11KV (45 KN) Polymer disc insulator for 11KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts washer etc. as required.

Supplying and erection of 33KV (10 KN) polymer pin insulator complete with long steel head G.I. pin, nut, washer etc. as required

Supplying and erection of 33KV (45 KN) polymer disc insulators for 33KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts, washers etc. as required.

Supplying and erection of single piece nonlinear resistor polymer type lighting arrestor (set of 3 nos) for 3 wire, 11KV overhead lines/sub-station with rated voltage of 9KV (rms) with a nominal discharge current rating of 10 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washer etc. as required.

Supplying and erection of single piece non-linear resistor polymer type lightning arrestor (set of 3 nos) for 3 wire, 33KV overhead lines/ sub-station with rated voltage of 27KV (rms) with a nominal discharge current rating of 10 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washer etc. as required.

Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On-Off position conforming to IS complete with required material and installing on existing DP structure to complete the job as required as per specification.(Set of 3 nos.)

Supplying installing, testing & commissioning D.O. fuse assembly with brass part contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse barrel i/c required fuse element & other materials as per specification on existing D.P. structure as required.

Supplying & replacement of D.O. fuse barrel with brass parts for 33 or 11 KV i/c required fuse element according to load as per specification on existing D.P. structure as required.

Supplying & replacement of D.O. fuse barrel for 33 or 11 KV as per specification on existing D.P. structure as required.

Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per MPMKVVCO. Specification.

Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per specification.

Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure/poles.

Shifting, erection, & commissioning of 25/63/100/200/315/500 KVA (11/0.433 KV) distribution transformer on existing structure including Bi-metallic clamp, ACSR/AAAC Conductor i/c colour code sleeve, for connection from H.T. Line to transformer as required as per specification.

Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for for D.P. structure electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required. The panel frame with required angle iron/ flat iron members/cross members including mesh welded in frame panel shall be erected between the posts. The angle iron post shall be erected in cement concrete M-15 (1:2:4) (20 mm graded metal) foundation, including excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.

Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required with angle iron/ flat iron members /cross members including mesh fix on frame and erected between the post. The angle iron post shall be erected in cement concrete M-15 (1:2:4) (20 mm graded metal) foundation, cement concrete, excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.

Designing and construction of pedestal (plinth) for transformer of desired size including excavation in hard rock/soft rock, base concrete M-7.5 (1:4:8), 20mm metal and pedestal of RCC M-15 (1:2:4) including required tar steel reinforcement for required height as per IE rules from base concrete including shuttering and finishing with 10mm thick plaster in cement mortar 1:3 curing & white washing etc. complete as per specifications.

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below –

Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size.

Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size.

Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below –

Supplying &fixing of spring loaded busbar screwless connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job.

Supplying & installing G.I. pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismantling & other finished masonry Item complete.

Collection and spreading of metal dust, murum and 40mm graded hard metal in sub-station yard or as required as mentioned below -

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor

Armoured 1 core

Supply of approved high-tension XLPE cable (conforming IS-7098/II/85) as per ISI standard 3 core armoured with alu. solid/stranded conductor ISI marked as required

Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete.

For conductor size-

Providing & Making cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 33 KV/11 KV 3 core XLPE alum. conductor cable as required as per specification and as per accepted standard including connection testing complete.

Heat shrinkable joint, kit 11 KV XLPE, 3 core

Providing and fixing earthing arrangement with 38.1mm dia 2.5 metre long galvanized iron pipe electrode including packing of charcoal powder and salt as per specification watering pipe 19mm dia G.I. connection, cover plate having locking arrangement on the top etc. complete with refilling the pit as required, including excavation of earth pit in soil / soft rock

Supply and laying 4.0mm (8 SWG) dia. G.I. wire at 0.5 metre below ground level as conductor earth electrode including jointing etc. as required.

Supply and laying 25mm X 5mm G.I. strip at 0.5 metre below ground level as strip earth electrode including jointing etc. as required.

Supply, installation, testing & commissioning of LT trivector energy meter, DLMS compliant category-A (for substation/feeder metering) , 3 phase 4 wire, 440 Volts, 5 Amp, accuracy class 0.5S with GSM(GPRS compatible) modem suitable for required C.T. 5A duly tested from electricity board with uPVC box .

Cable laying

Laying of underground cable armoured./unarmoured as per specification in air suspended on existing approved type of iron clamp, G.I wire 7/1.6mm & shackle insulator/insulated strip complete.

Supply &fixing cable route marker round/square size 100mm, 5mm. thick, G.I. Plate duly bolted/welded on 35mm x 35mm x 5mm angle iron 60cm long including excavation, grouting in cement concrete 1:2:4 (1cement and 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation of size 20cm x 20cm x 30cm duly embedded in ground 30cm depth or as required.

Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, excluding excavation, back filling with excavated material, ramming and making the surface good.

Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :-

Single pole

Double pole

Four pole

Supply of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS – 8828

Supplying and erection of water tight terminal box made of 16 SWG M.S. Sheet (1.6mm thick) i/c rubber gasket of required size suitable for kit kat/MCB/switch including 2 nos. pole clamp of M.S. flat iron size 32x3mm, nut and bolts, The box shall be powder coated excluding the cost of the kit kat/MCB/Switch 4 Pole epoxy connector nut & bolt type, 30Amp, 500Volt complete as per specification as mentioned below.

Supply and fixing of multi core round FRLSH PVC insulated copper (flexible) conductor & PVC sheathed cables 1100Volts as per IS:694-1990 of approved make

Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only)

Supply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.

Supplying and erection of 11KV porcelain disc insulator for 11KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts washer etc. as required.

Supplying and erection of 33KV porcelain pin insulator complete with long steel head G.I. pin, nut, washer etc. as required

Supplying and erection of a set of three 11KV porcelain disc insulators for 33KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts, washers etc. as required.

Supplying and erection of a set of four 11KV porcelain disc insulators for 33KV overhead lines with galvanized insulator fittings, ball and socket type, and complete with galvanized strain clamp, bolts, nuts, washers etc. as required.

Supply, installation, testing & commissioning of LT CT ratio 500-200/5 Amp epoxy coated Indoor Type duly tested from electricity board.

Supply and erection of approved make safe earthing electrode consisting pipe-in-pipe technology as per IS 3043-1987 made of corrosion free G.I. pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing in earth pit of minimum bore dia. 150mm size, as mentioned below :

Dismantling of existing H-Beam/R.S. joist/PCC/Rail pole including accessories such as, cross arms, top clamp, V-Cross Arm, stud, stay set, conductor, cable, guard wire etc. complete

Painting of pole such as, H-Beam/R.S.J/V-Cross Arm Top clamp/ other allied fittings with one coat of primer red oxide paint and two coat of aluminium paint complete as required as per specifications.

All items below are taken From MPPWD PIU Electrical SOR wef 01.01.2024

Supply & fixing of High Breaking Capacity (HBC) Fuse Links knife (DIN) type as per IS : 13703 : 1993 & IEC : 60269 :1986 with 80 kA breaking capacity of approved make

125 Amp to 160 Amp

200 Amp to 315 Amp

350 Amp to 400 Amp

NON SOR Item

NON SOR -1 (M-0401018)

Schedule Total Rs.

Executive Engineer PWD E/M Division No. 1, Bhopal