GE/BAS-27/2024-25 Repair and maintenance of security lights, road lights, solar lights and standby generator sets at Basoli station under GE Basoli

Amount

Repair/rectification for street light/ perimeter light/ flood light any type, capacity & make to make the security / street lights in serviceable condition as intimated by JE EM/ Engineer-in-Charge after rectification/ trace out the fault which includes removing of street/ security light fitting from LT/ HT PCC/Steel tubular/ Swan neck poles, refixing after repair, tightening of loose connection of ACSR conductor / with bus bar chamber / in DB, replacement of lamp, lamp holder, capacitor,replacement of connection wire or any other part and refixing in proper alignment on GI Pipe bracket or by other means as per site requirement including replacement of screws, nuts, bolts washers as required proper connection with PVC insulation tape etc complete to keep the light in serviceable condition through out the period of contract by repairing on time all as directed to the entire satisfaction of JE EM/ Engineer-in-Charge Note:- (i) Worn out/damaged/Unserviceable parts to be replaced shall be measured and paid for separately under relavant items of Sch " A' as supply only and fixing is deemed to be included under this item. (ii) All the T&P and transportation required for the work shall be arranged by the contractor which shall be deemed to be included in quoted rate. Contractor shall provide the all type of T&P i.e. tools, insulation tape, ladder any type etc to electricial for attending the complaints. The quoted rate include the cost of minor items i.e. screws, nuts, washers for light fitting etc. (iii) Contractor shall provide & maintain the register regarding 100% serviceability of security lights duly signed by the JE/ Engineer-in-Charge , Contractor , unit rep. (iv) The work will be carried out as per direction of JE/ Engineer-in-Charge. (v) The electrician shall receive the complaint from JE/ Engineer-in-Charge on complaint slip and after completion of job the slip shall be deposited to JE/ Engineer-in-Charge daily duly signed by users. The printed complaint slip and complaint register shall be arranged by the contractor without any extra cost. (vi) An inventory for the parts/ spares which are found unserviceable and requir replacement with new parts/ spare shall be prepared and kept in record duly signed by Engineer-in-Charge and Contractor.

Excavation in trenches not exc 1.5m wide and not exc 1.5 mtr deep and getting out in any type of soil complete all as specified and directed .

Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Returning filling in (soil) including spreading levelling, watering and well ramming in layers not exc 25 cm thick each complete all as specified and directed .

Supply only and replaced under the item No.1 Driver electronic compact type suitable for LED street light fitting 30 watt to 70 Watt as per sample/required at site complete all as specified and directed.

Supply only and replaced under the item No.1 Driver electronic compact type suitable for LED street light fitting 90 Watt as per sample/required at site complete all as specified and directed.

Supply only and replaced under the item No.1 Driver electronic compact type suitable for LED street light fitting120 Watt as per sample/required at site complete all as specified and directed.

Supply and fix in repair / replacement LED street light fitting of capacity 45 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP-66 and impact reistance of IK-07 with high power LEDs as light suorce with electronic chip and driver (lamp type 45W LED) efficenacy 100 Lm/W 5700 K suitable for pole dia 54mm(max) complete with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: ENDURASUNBEAMSL45WLED757SASYTOPC of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement LED street light fitting of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP-66 and impact reistance of IK-07 with high power LEDs as light suorce with electronic chip and driver (lamp type 60W LED) efficenacy 100 Lm/W 5700 K suitable for pole dia 54mm(max) complete with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: ENDURASUNBEAMSL60WLED757SASYTOPC of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement LED street light fitting of capacity 35/30 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 with high power LEDs as light suorce with electronic chip and driver (lamp type 35W LED) efficenacy 100 Lm/W 5700 K suitable for pole dia 54mm(max) complete with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: ENDURASUNBEAMSL30WLED757SASYBOPC of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement flood light of capacity 30 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP-66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: JETAADORNFLS050WLED757PR1SYMTOTG of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement flood light of capacity 50 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP-66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: JETAADORNFLS050WLED757PR1SYMTOTG of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement flood light of capacity 70 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: JETAADORNFLS70WLED757SSYMTOTG of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement flood light of capacity 150 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver with the provision of double driver and additional surge protector of capacity 10 kv complete all as specified and directed. (Cat Part No: JETAADORNFLS150WLED757PR1SYMTOTG of Havells or its equivalent in CG/WIPRO/Bajaj/Phillips)

Supply and fix in replacement of three core copper conductor multi-stranded type PVC insulated and sheathed of 1.5 sqmm, 1100 volts grade and connected to the street light from over head line or Junction boxes complete all as specified and directed.

Supply and fixing in replacement PVC conduit 25mm dia medium grade for fixing along the pole with 02 Nos clamps per pole the connections from junction box to street lights complete all as specified and directed.

Dismantling and taking down old U/S PCC LT steel pole of any size including earth work, removing the PCC etc complete all as specified and directed.

Supply and, erecting and fixing in position, steel tubular swaged and welded poles of type 410 SP-31, 9 mtr long, IS-2713 marked, with mild steel base plate (fillet welded to poles), bolts, nuts, washers etc, including painting on the outside with two coats of aluminium paint over a coat of red oxide primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and painting 05 Nos band/strip with fluorescent, PO box red synthetic enamel paint and alternate white strip (30 cm wide each) at a distance of 30 cm from plinth block and numbering of poles, complete all as specified and directed. Note : (i) Excavation, earth work and PCC will be measured and paid for separetely under respective items of Schedule 'A'. (ii) Poles shall be swaged and welded at manufacturer's factory and not at site. The inner surface shall be factory painted complete all as specified and directed

M&L for PCC (1 : 3 : 6) type C-2 using 40mm graded crushed stone aggreghate for foundation of poles and stay assembly, complete all as specified and directed.

M&L for PCC ( 1 : 2 : 4 ) type B-2 using 40mm graded crushed stone aggreghate for foundation of poles and stay assembly, complete all as specified and directed.

Taking out the old unsv LT/AB cable any type any size in any position from pole in any height or passing through pipe heavy duty electric cable etc complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe,1100 volt grade heavy duty cable with XLPE insulated aluminium conductor ,served with an inner sheathing of PVC tape armoured with galvanised steel of size 10 sq mm X 2 core stranded conductor, complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe,1100 volt grade heavy duty cable with XLPE insulated aluminium conductor ,served with an inner sheathing of PVC tape armoured with galvanised steel of size 10 sq mm X 4 core stranded conductor, complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe,1100 volt grade heavy duty cable with XLPE insulated aluminium conductor ,served with an inner sheathing of PVC tape armoured with galvanised steel of size 16 sq mm X 2 core stranded conductor, complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe,1100 volt grade heavy duty cable with XLPE insulated aluminium conductor ,served with an inner sheathing of PVC tape armoured with galvanised steel of size 16 sq mm X 4 core stranded conductor, complete all as specified and directed.

S&F in replacement DWC high density polyethelene pipes having dia 63mm/50mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930 (Part-I & II) for protection of underground cable laid along pole/ along wall / in PCC on GL/ Roof and including all fittings as required at site complete all as specified and directed.

Supply and fix in replacement for junction box of size 300x250x150mm made out of 1.6 mm thick CRCA sheet powder coated front hinged door with openable and self closing arrangements including aluminium bus bar 3 Phase 4 wire system of size 20mm x 5mm fixed on SMC/DMC insulators and cable entry glands for connections and MCB SP 6 Amps-01 No all as required and fixed to poles with MS clamp made out of MS flat iron of size 25x5mm and including nuts, bolts and washers complete all as specified and directed.

Supply and fix in replacement Off load change over switch four pole with sheet metal enclosure of capacity 63 Amps , 415 Volts,Ac with necessary nuts, bolts and washers including necessary electric connections incl taking down old complete all as specified and directed

Supply and fix in replacement Off load change over switch four pole with sheet metal enclosure of capacity 100 Amps , 415 Volts,Ac with necessary nuts, bolts and washers including necessary electric connections incl taking down old complete all as specified and directed

Supply and fix in replacement Off load change over switch four pole with sheet metal enclosure of capacity 160 Amps , 415 Volts,Ac with necessary nuts, bolts and washers including necessary electric connections incl taking down old complete all as specified and directed

S&F structural steel work conforming to grade Fe-410S as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including, nuts, bolts, washers, welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat, one finishing coat of aluminium paint and epoxy coating, including taking down old corroded structural steel complete all as specified and directed

M&L for comprehensive maintenance and repair of diesel engine of DG sets 62.5 KVA capacity installed at various locations, by periodical servicing maintenance as per OEM recommendations, repair including replacement of defective/unserviceable spare parts, tracing & removing of any fault/error indication or meassage showing/ indicating on display screen, greasing to doors/over hauling to various parts, cleaning of DG set, inspecting the serviceability of all parts and testing on full load after periodical service/repair by manufacturer's authosied workshop, complete all as specified and directed. (Spare Parts shall be measured and paid for seperately under respective items as per recommandations of BOO. The maintenance of above mentioned DG sets carried out will be measured as one unit)

All as per Srl Item No 32 above but DG Set of 40 KVA/30 KVA capacity complete all as specified and as recommanded by BOO (Note: The maintenance of above mentioned DG set carried out will be measured as one unit) Notes for Sr Item No 32 to 33- The BOO will examine the DG set at the time of opening of DG set by approved firm engineer or trained mechanic by the approval of GE, the following shall be covered as under :- (i) New spare parts and engine oil shall be measured and paid separately under respective items. (ii) Labour charges for replacement of old engine oil and old defective spare parts shall be deemed included in quoted rates. (iii) Cost of routine lubrication/ greasing to spare parts, lubricants/grease, tightening of nut, bolts and washers etc. shall deemed to be included in quoted rates. (iv) Cost of fixing and transportation of all components/ spare parts required being repair, of DG sets from site to workshop for repair and workshop to site after repair shall be deemed included in quoted rates. (v) Periodical routine maintenance/ checkup of diesel generator sets shall be carried out as per TI-04 of 1984 and maintenance record, prepared/ maintained by contractor and signed by concerned JE E/M, Engineer-In-Charge and Contractor. This maintenance record shall be produce to Garrison Engineer whenever asked. (vi) Periodical routine maintenance/checkup of diesel generator sets shall be carried out as per following periodicity: a) Stage-I (Monthly): (i) Cleaning of air cleaner/ filter. (ii) Changing of lubricants and oil filter elements. (iii) Cleaning of fuel tanks and cleaning of fuel filter elements. (iv) Cleaning of radiator cooling fins and top up of coolant. (v) Cleaning of line cylinder head fins, in case of air cooled engines.(vi) Checking of all electrical instruments/indicating or any other gauge i.e. frequency meter,voltmeter, ammeter, revolution meter, Hrs run meter, water temp gauge, fuel gauge etc for satisfactory functioning. (b) Stage-II (Quarterly): (i) Changing of engine oil, if required, and clean the pre-cleaner bowl. (ii) Check/ open radiator fins, and clean, if chocked/ blocked. (iii) Check button filter in banjo bolt of feed pump. (iv) Drain the water from water separator, if provided. (v) Check all external fasteners as per specified torques. (vi) battery lead connections. (vii) Check belt alignment and belt condition. (viii) Check turbo changer. (ix) Leakage in air take/ exhaust of exhaust piping (x) Lubrication to the turbo charger, Oil filter.

Replacement of existing UNSV parts with new parts (fixing shall be paid against Srl item No. 32 of DG set 62.5/50 KVA (a) Fuel Filter

(b) Oil filter

( c) Fan belt

( d) Hose pipe with two Nos. of metallic clips

(e) Diesel pipe(steel) with banjo connection.

(f) Air filter

Replacement of existing UNSV parts with new parts (fixing shall be paid against Srl item No. 33 of DG set 40/30 KVA (a) Fuel Filter

(b) Oil filter

( c) Fan belt

(d) Hose pipe with two Nos. of metallic clips

(e) Diesel pipe(steel) with banjo connection.

( f) Air filter

Replacement of coolant fluid of make as approved by Engr-in-Charge suitable for radiator of DG set of any capacity/make complete all as specified and directed

Replacement of Engine oil/ lubricant, 20 W 40 grade or any other grade as recommended by OEM of Engine or Engr-in-Charge suitable for DG set of any capacity and any make, complete all as specified and directed

Suppy only distill water for battery of DG Set etc complete all as specified and directed .

Supply and fix in Replacement of battery 12 volt, 80 AH heavy duty maintenance free incl initial charged complete in all respects. complete all as specified and directed

Supply and fix in Replacement of battery 12 volt, 150 AH heavy duty maintenance free incl initial charged complete in all respects. complete all as specified and directed

S&F of bracket made out of 1.5M long 25mm dia light grade galvanished iron steel tubing for fixing light fitting including dismantling taking out old U/S complete all as specified and directed .

M&L earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edges, of the plate not less than 1.5m below normal ground level, connected to the Galvanised Iron earth lead 32mmx6mm (GI Strip) size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to distance not exceeding 50 mtr plate No 3 of SSR 2009 Part-I and connecting to feeder pillars and Transformer all as specified including testing on completion complete all as specified and directed.

Material and labour for repairing decarburizing manifolds exaust system and connected items of exhaust muffler / silencer including necessary nuts, bolts and washers etc with necessary masonry works as required at site complete all as specified and directed.

Calibration of fuel injection pump for DG set for 30 to 62.50 KVA and replacement of following unserviceable parts of the pump complete all as specified and directed .

Supply only Element. Make as per existing: Mico.

Supply only Delivery valve. Make as per existing: Mico.

Supply only Bearing of existing one. Make as per existing: Mico.

Supply only Pump seal. Make as per existing: Mico.

Taking out the self starter 12 Volt of DG Set Cap 20KVA to 63 KVA and shifting to workshop for rewinding of armature including replacement of unserviceable, bushes & minor following parts & reinstalling the same after testing complete all as specified and directed.

Supply only Steel pinion. Make as per existing: Lucas.

Supply only Clutch assy. Make as per existing: Lucas.

Supply only Solenoid switch. Make as per existing: Lucas.

Supply only Carbon brush. Make as per existing: Lucas.

Taking out the charging alternator of DG Sets 30 KVA to 63 KVA and shifting to workshop for rewinding of armature including replacement of unserviceable, bushes & minor parts & reinstalling the same after testing complete as specified.

M&L cleaning of diesel tank of DG Set of any capacity including replacement of worn-out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed.

Supply only Battery Terminals heavy duty Copper.(Positive & Nagative) complete all as specified and directed.

Supply only Battery Copper cable Red with plug complete all as specified and directed.

Supply only Battery Copper cable Black with plug complete all as specified and directed.

Supply only Radiator hose pipe for DG Set complete all as specified and directed.

S&F in replacement water pump assembly with DEL Body of 30 KVA,62.5 KVA, capacity complete all as specified and directed .

M & L for replacement fan assembly suitable for DG Set of 32 KVA, 62.5 KVA capacity complete all as specified and directed

Overhauling of radiator assembly of 30 KVA to 62.5 KVA DG set by disconnecting and removing from the engine, dismantling the top and bottom chambers, descaling the sediments, scales, corrosion etc. by means of acid, cleaning and high pressure water washing, air cleaning, re-assembling the same with new gaskets including arresting leakages, if any and fixing to the engine with new hoses, clips etc. all as required and as directed.Note: The rate quoted shall be inclusive of transporting of the radiator to the workshop and back and all incidental charges.

M & L for painting of exhaust pipe of DG sets with heat resistant paint of approved quality including preparation of surfaces of exhaust pipe complete all as specified and directed.

M & L for cleaning of DG sets including removing of oil, grease and etc spot washing carefully with soda water preparation of old painted surface and painting to the DG sets of capacity 62.5 to 225 KVA with two coat of spray painting of approved make and colour of first grade paint and making good all as specified and directed.

Supply and replacement of AVR (automatic voltage regulator) suitable for 30 KVA to 62.5 KVA DG set complete all as specified and directed.

Material and labour for control panel of DG set for operating the DG set including pressure gauge, lub oil gauge, KWH meter, start stop button, RPM meter including replacement of internal control wiring, controller, Relay card , MPU, resistance kit and fixing the panel on the top of the DG set on angle iron frame complete all as specified and directed .

Supply and fixing in replacement of switch starting as per sample 63 KVA,capacity DG set complete all as specified and directed

Supply and fix fire alarm control panel complying with BS EN 54 single loop panel of capacity from 99 detectors & 99 modules up to 200 detectors panel shall have in built rectifier, loop cards, provision for external LCD unit to indicate fire fault signal with address.240 volts AC power supply automatic battery charger12/24 volts, complete all as specified and directed.

Supply and replacement addressable intelligent multi sensor detectors with two inbuilt optical smoke ensures with backward & forward scattering light angles eliminating false fire signature as well as additional heat detector sensor with decentratalise intelligence IS 2175 soft addressable photo thermal type with inbuilt fault isolator complying with and type certified to EN-45 addressable type multi sensor detector complete all as specified and directed.

Supply & replacement of manual call point soft addressable resettle type complete all as specified and directed.

Supply and replacement fire alrm sounders/ siren electronic type horizontal two stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 m with sound output variation of +05 DB 1000 m range conforming with EN 54 approvals complete all as specified and directed.

Supply and fix PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS-694 red colour of nominal cross sectional area 2.5 sqmm 3 core including necessary fixing arrangement as per site suitable for connecting fire alarms and detectors complete all as specified and directed..

Supply & replacement installtion and testing of 12 volts maintenance free VRLA 12 volt battery 7 AH suitable for fire alarm and detectors functioning complete all as specified and directed.

Supply and replacement of 2 core x 1.5 sqmm red colour fire alarm system cable including necessary fixing arrangement as per site requirement complete all as specified and directed.

G.M. ENGINEERING SERVICES (BID ID -3127210)

GOLDEN CONSTRUCTIONS (BID ID -3125328)

KALSI CONSTRUCTION CO (BID ID -3127040)

M/s Northern India Construction co (BID ID -3125462)

kewal builders (BID ID -3125500)

JANDIAL ENTERPRISES (BID ID -3125721)

KHAJURIA ENGINEERS (BID ID -3126659)

VIKRAM SINGH MANHAS (BID ID -3127042)