Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹12.4 Cr
EMD Value
₹12.4 L
Closing Date
15 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Supply and Installation of Tables and Chairs of Lecture Hall Theatres(1,2 and 3) and Auditorium building at Argul Campus,IIT Bhubaneswar,Odisha.
NBCC/SBG/IIT/BBSR/2022/34
NBCC/SBG/IIT/BBSR/2022/34
Open Tender-Domestic
Civil Works General
Khordha, Odisha
₹11,800
₹12.4 L
15 Sept 2022
6 Sept 2022
15 Sept 2022
15 Sept 2022
26 Sept 2022
Bill of Quantities
Name of the Work - Supply and Installation of Tables and Chairs of Lecture Hall Theaters (1, 2 & 3 ) and Auditorium
building at Argul Campus, IIT Bhubaneswar, Odisha.
Nomenclature of Amount in Rs. Per
Sl No. LHC No. of Classroom Total Amount in Rs.
Sl No. LHC No. of Classroom Total Amount in Rs.
Classroom class room
Sub Total 1 2,42,53,823
Sub Total 2 3,66,82,650
Sub Total 3 3,45,69,966
7 Auditorium building 1,87,99,425
8 Flipped classrooms at
LHC1 Sub Total 5
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.09.06 17:52:50
Specifications of 60 seater Class room furniture at IIT
Name of the Work:
Items of work Quantity Unit Amount
1 SITC of Desking two seater 1st row :Size :- H:786xW:400xL:1030 mm. C- Frame & Tubular
cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding .
Top made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round
wooden bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1 mm
laminate modesty panel fixed on MS CRCA pipe of size 25 x 75 x1.6 mm thick. MS cold rolled 6.00 Set
close annealed 1.6mm press formed pedestal for better grip and with provision to be grouted
at floor. All steel components are epoxy powder coated after ten tanks anti corrosion
treatment of surface of 40 to 50 microns.
2 SITC of Desking two seater 2nd row : Size :- H:786xW:400xL:1030 mm. C- Frame & Tubular
cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding
.Top made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round
wooden bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1 mm
laminate modesty panel fixed on MS CRCA pipe of size 25 x 75 x 1.6 mm thick. MS cold rolled 22.00 Set
close annealed 1.6mm press formed pedestal for better grip and with provision to be grouted
at floor. All steel components are epoxy powder coated after ten tanks anti corrosion
treatment of surface of 40 to 50 microns.
3 SITC of Desking three seater 2nd row : Size :- H:786xW:400xL:1582 mm. C- Frame &
Tubular cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot
welding .Top made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half
round wooden bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1
mm laminate modesty panel fixed on MS CRCA pipe of size 25 x 75 x 1.6 mm thick. MS cold 6.00 Set 10,63,171.54
rolled close annealed 1.6mm press formed pedestal for better grip and with provision to be
grouted at floor. All steel components are epoxy powder coated after ten tanks anti corrosion
treatment of surface of 40 to 50 microns.
4 SITC of two seater chair : Overall Size :- Length 1030mm, Depth 553mm, Seat Size : Width
477mm, Depth 377mm, 12mm thick, Seat Height 460mm. Back mould size : Height 474mm,
Width 477mm, 12mm thick, Mounted on 64mmx64mmx3mm aluminium glide fitted with MS
cold rolled close annealed leg made of 60mmx60mmx2mm MS tube and MS sheet 3mm thick
covered with nylon cap. Back of chair made of 12mm thick hot pressed molded ply with 0.6mm 28.00 Set
thk Laminates. Foldable seat made of 12mm thick hot pressed molded ply with 0.6mm thk
Laminates. All steel components are epoxy powder coated after ten tanks anti corrosion
treatment of surface of 40 to 50 microns.
5 SITC of three seater chair : Overall Size :- Length 1583mm, Depth 553mm, Seat Size : Width
477mm, Depth 377mm, 12mm thick, Seat Height 460mm. Back mould size : Height 474mm,
Width 477mm, 12mm thick, Mounted on 64mmx64mmx3mm aluminium glide fitted with MS
cold rolled close annealed leg made of 60mmx60mmx2mm MS tube and MS sheet 3mm thick
covered with nylon cap. Back of chair made of 12mm thick hot pressed molded ply with 0.6mm 6.00 Set
thick Laminates. Foldable seat made of 12mm thick hot pressed molded ply with 0.6mm thick
Laminates. All steel components are epoxy powder coated after ten tanks anti corrosion
treatment of surface of 40 to 50 microns.
Name of the Work: Estimate for 120 seater Class room furniture at IIT Bhubaneswar.
Items of work Quantity Unit Amount
1 SITC of Desking three seater 1st row Size :- H:786xW:400xL:1582 mm. C- Frame & Tubular cold
rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding . Top made
of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round wooden bidding for
edge duly polished. 18 mm BWR plywood pasted with both side 1 mm laminate modesty panel fixed
on MS CRCA pipe of size 25 x 75 x 1.6 mm thick. MS cold rolled close annealed 1.6mm press formed
pedestal for better grip and with provision to be grouted at floor. All steel components are epoxy
powder coated after ten tanks anti corrosion treatment of surface of 40 to 50 microns. The overall
appearance of the product shall be as per photograph.
2 SITC of Desking three seater 2nd row: Size :- H:786xW:400xL:1582 mm. C- Frame & Tubular cold
rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding .Top made of
25mm thick BWR plywood pasted with both side 1 mm laminate . Half round wooden bidding for
edge duly polished. 18 mm BWR plywood pasted with both side 1 mm laminate modesty panel fixed
on MS CRCA pipe of size 25 x75 x 1.6 mm thick. MS cold rolled close annealed 1.6mm press formed
pedestal for better grip and with provision to be grouted at floor. All steel components are epoxy
powder coated after ten tanks anti corrosion treatment of surface of 40 to 50 microns. The overall 18,10,769.70
appearance of the product shall be as per photograph.
3 SITC of three seater chair : Overall Size :- Length 1583mm, Depth 553mm, Seat Size : Width
477mm, Depth 377mm, 12mm thick, Seat Height 460mm. Back mould size : Height 474mm, Width
477mm, 12mm thick, Mounted on 64mmx64mmx3mm aluminium glide fitted with MS cold rolled
close annealed leg made of 60mmx60mmx2mm MS tube and MS sheet 3mm thick covered with nylon
cap. Back of chair made of 12mm thick hot pressed molded ply with 0.6mm thk Laminates. Foldable
seat made of 12mm thick hot pressed molded ply with 0.6mm thk Laminates. All steel components
are epoxy powder coated after ten tanks anti corrosion treatment of surface of 40 to 50 microns. The 42.00 Set
overall appearance of the product shall be as per photograph.
Name of the Work: Estimate for 240 seater Class room furniture at IIT Bhubaneswar.
Items of work Quantity Unit Amount
1 SITC of Desking two seater 1st row Size :- H:786xW:400xL:1030 mm. C- Frame & Tubular cold
rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding . Top
made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round wooden
bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1 mm laminate
modesty panel fixed on MS CRCA pipe of size 25 x 75 x1.6 mm thick. MS cold rolled close annealed 8.00 Set
1.6mm press formed pedestal for better grip and with provision to be grouted at floor. All steel
components are epoxy powder coated after ten tanks anti corrosion treatment of surface of 40 to
The overall appearance of the product shall be as per photograph.
2 SITC of Desking two seater 2nd row: Size :- H:786xW:400xL:1030 mm. C- Frame & Tubular
cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding .Top
made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round wooden
bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1 mm laminate
modesty panel fixed on MS CRCA pipe of size 25 x 75 x 1.6 mm thick. MS cold rolled close annealed 58.00 Set
1.6mm press formed pedestal for better grip and with provision to be grouted at floor. All steel
components are epoxy powder coated after ten tanks anti corrosion treatment of surface of 40 to
The overall appearance of the product shall be as per photograph.
3 SITC of two seater chair : Overall Size :- Length 1030mm, Depth 553mm, Seat Size : Width
477mm, Depth 377mm, 12mm thick, Seat Height 460mm. Back mould size : Height 474mm,
Width 477mm, 12mm thick, Mounted on 64mmx64mmx3mm aluminium glide fitted with MS cold
rolled close annealed leg made of 60mmx60mmx2mm MS tube and MS sheet 3mm thick covered
with nylon cap. Back of chair made of 12mm thick hot pressed molded ply with 0.6mm thk 66.00 Set
Laminates. Foldable seat made of 12mm thick hot pressed molded ply with 0.6mm thk Laminates.
All steel components are epoxy powder coated after ten tanks anti corrosion treatment of surface
of 40 to 50 microns.
The overall appearance of the product shall be as per photograph.
4 SITC of Desking three seater 1st row Size :-H:786xW:400xL:1582 mm. C- Frame & Tubular
cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding . Top 37,38,353.53
made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round wooden
bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1 mm laminate
modesty panel fixed on MS CRCA pipe of size 25 x 75 x 1.6 mm thick. MS cold rolled close annealed
1.6mm press formed pedestal for better grip and with provision to be grouted at floor. All steel
components are epoxy powder coated after ten tanks anti corrosion treatment of surface of 40 to
50 microns. The overall appearance of the product shall be as per photograph.
5 SITC of Desking three seater 2nd row: Size :- H:786xW:400xL:1582 mm. C- Frame & Tubular
cold rolled close annealed Steel Structure. Fabrication involves only MIG/TIG & Spot welding .Top
made of 25mm thick BWR plywood pasted with both side 1 mm laminate . Half round wooden
bidding for edge duly polished. 18 mm BWR plywood pasted with both side 1 mm laminate
modesty panel fixed on MS CRCA pipe of size 25 x 75 x 1.6 mm thick. MS cold rolled close annealed 41.00 Set
1.6mm press formed pedestal for better grip and with provision to be grouted at floor. All steel
components are epoxy powder coated after ten tanks anti corrosion treatment of surface of 40 to
50 microns. The overall appearance of the product shall be as per photograph.
6 SITC of three seater chair : Overall Size :- Length 1583mm, Depth 553mm, Seat Size : Width
477mm, Depth 377mm, 12mm thick, Seat Height 460mm. Back mould size : Height 474mm,
Width 477mm, 12mm thick, Mounted on 64mmx64mmx3mm aluminium glide fitted with MS cold
rolled close annealed leg made of 60mmx60mmx2mm MS tube and MS sheet 3mm thick covered
with nylon cap. Back of chair made of 12mm thick hot pressed molded ply with 0.6mm thk
Laminates. Foldable seat made of 12mm thick hot pressed molded ply with 0.6mm thk Laminates.
All steel components are epoxy powder coated after ten tanks anti corrosion treatment of surface
of 40 to 50 microns.
The overall appearance of the product shall be as per photograph.
AUDITORIUM CHAIRS
Sno DESCRIPTION QTY UNIT RATE AMOUNT
AUDITORIUM CHAIR
1 Supply & installation of Common armrest Auditorium Chair 530-550 mm c/c Fire 1500 Each 12532.95 18799425.00
Retardant fabric upholstered flammability BS EN 1021-1 ;1994 and BS EN 1021-1
1994 (Low Hazard) Chair conforming to BIFMA standards.
The chair to have MS tubular framework welded together with continuous arc
welding. Grouted in the floor with 2 no of anchor for each panel through base plate The
seat and Back rest shall have automotive Polyurethane foam of density 50 + 5 Kg/m3
contestan: compression set Max 13% and upholstered with high performance fabric Metal
and hardened metal wire and assembly as per ERW Tube/lS: 3074-2005. Metal mesh
structure should be integrated with flumatic slider mechanism with triple action of push
back towards the side of the seat auto tip up of seat The height of the back to be 1040-
1070 mm from the ground to top of back ,for Seat to be 440-455 mm from the ground.
Chair width 530-550 mm center to center of common Teak/Sal_ solid hard wood with
polish as arm rest and depth 750-770 normal condition. Polypropylene back and seat pan
for easy maintained Row numbering and Foot light provision at sides along with aisles and
movement mechanism of die cast aluminum complete as per manufacturer's
Furniture for flip class room of LHC-1 (Ground Floor)
SL. NO. SPECIFICATION OF FURNITURE Quantity Unit Amount
A 60 Seater classroom ( 8 Nos. )
Providing and fixing of 8 seater conference table of size 2.40m x 1.20m.
The table top to be made of 25mm thick BWR plywood pested with 1mm
1 thick laminate on both side all the edges of the tables are provided with 24 Nos
polished half round wooden bedding. The support of frame of the table is to
be fabricated using 40 x 40 x 1.6mm thick M.S. CRCA pipes including cost of
materials, transportation, taxes etc complete.
Providing and fixing of 8 seater round table of size 1.80m dia. The table top
to be made of 25mm thick BWR plywood pested with 1mm thick laminate on
2 both side all the edges of the tables are provided with polished half round 16 Nos
wooden bedding. The support of frame of the table is to be fabricated using
40 x 40 x 1.6mm thick M.S. CRCA pipes including cost of materials,
transportation, taxes etc complete.
Providing and fixing of revolving chair with PU arm rest metal base wheel
and the back rest with net including cost of materials, trasportation, taxes
B 120 Seater classroom ( 1 No. )
Providing and fixing of 8 seater conference table of size 2.40m x 1.20m.
The table top to be made of 25mm thick BWR plywood pested with 1mm
1 thick laminate on both side all the edges of the tables are provided with 8 Nos
polished half round wooden bedding. The support of frame of the table is to
be fabricated using 40 x 40 x 1.6mm thick M.S. CRCA pipes including cost of
materials, transportation, taxes etc complete.
Providing and fixing of revolving chair with PU arm rest metal base wheel
and the back rest with net including cost of materials, transportation, taxes
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 34.pdf
Tender Document
BOQ 34.pdf
Tender Document
Tender drawing with specification 34.pdf
Tender Document
Scope of work 34.pdf
Tender Document
Instruction to Bidder for online Bid Submission _34.pdf
Tender Document
GCCContracting 2019 with 9 amendments.pdf
Tender Document
GCC Amendments 10 to 16.pdf
Tender Document
integrity pact 34.pdf
Tender Document
corrigendum-1007-NOTICE_NIT 34.pdf
pdf • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .