Est of community Radio Station (CRS) at Mantripukhri Grn at Mantripukhri (Influence in entire Imphal Valley),Dist- Imphal City, Manipur

Amount

EST OF COMMUNITY RADIO STATION

50 W FM Transmitter

Two Bay 2 Dipole Antenna

RF cable (RF Co Axial Cable 50 Meter with N Connector at both end)

9RU 19” Equipment Rack for Transmitter

100W Dummy Load with matching transformer

Manual Change Over Panel with 3 nos of Patch cord for switching between main and standby transmitter

Supply installation testing and commissioning of 30 Meter self supported tower on ground with foundation, erection, galvanizing, earthing, lightning arrestor, aviation light etc

Monitor 50W

12 Channel Analog Audio Mixer

16 Channel Analog Audio Mixer

RJ Condenser Microphone

Two Channel USB Soundcard

Table Top Stand

Flexible Microphone Stand

Headphone

Playout Software with Logger

Dynamic Cardioid Microphone

Hand Held Recorder

Studio Recording & ON Air Light

Misc Installation Material like audio cable, connector

Installation and Commissioning Work to make the CRS fully functional include

Desktop Audio Work to Station (i5-10th Gen/16GB/1TB/250SSD/Win-10 Pro/3 Year/18.5” TFT)

STUDIO ACOUSTICS WORK

On air studio : 12 +12+09+09+10= 52x10=520 Recording Studio : 10+10+09+09+10=48x 10 = 480 (a) Low frequency treatment shall be comprised with ¾ mm thick teak ply as a facing material and 50mm thick, 500 GSM density ply wadding material as an absorbing material, fixed on 50x50 GIU channels or wooden battaons of size 50 x 35 mm size with New Zealand pine wood or equivalent. Wooden skirting of 125 mm x 19mm at bottom and 75 mm x 19mm plank with triangular bedding at top. (b) Mid/High frequency treatment shall be comprised with 50mm thick 800 GSM density poly wadding material fixed on wooden framework and faced with fabric of suitable colour

Wooden Sound Proof Door- P/f of the magnetically sealed sound reducing doors inclusive of teak wood outer frame. Filled with high density polymer & acoustical insulating materials. The door to have magnetic seals and panel to be faced with 38 x 1.2 mm anodized MS strip. Faced with Com ply laminated with 1mm thick laminate of desired colour.

Electrical Works- Design & Fabrication of LT power distribution panel as per power schematic drawing including its installation and excluding AMF panel. Point wiring of LED lamp of appropriate nos. as required including switch board, switches with stranded copper cables and piano type modular switch in PVC casing. Decorative fitting Philips make including installation in false ceiling for LED lamp

Technical Furniture

Production Table to house the console

ON air Table

Transmitter Room Table

Hiring of Manpower

Station Manager (Senior RJ)

Content Creator

02 x Radio Jockey (RJ)

Trainee Radio Jockey

Caretaker

Routine expenditure

GAURI ENTERPRISES (BID ID -3142042)

JBM ENTERPRISES (BID ID -3142874)