Provn of certain items, 27 x solar street lights, air conditioner for KDTL, 15 x desert cooler, 15 x ceiling fan, 15 x geysers and 01 x deep freezer at Mil Stn Kapurthala under GE Kapurthala

S&F of semi-integrated solar street light 45 watt made up of aluminium pressure die cast (PDC) housing, IP65 (120 Lm/W) with an in-built battery of capacity 48 Ah connected with poly solar PV Panel of120 Wp size mounted on top of the pole and mounting clamp, inbuilt MPPT charge controller and PIR motion sensor for motion detection with connector, pin and 1.0 sqmm twin core sheathed copper cable for connection and accessories. Note : 20 years performance warranty on solar panel SPV Module.

S&F of 6 Mtr GI pole of 50 mm bore dia with grouting rods, & necessary hardware including PCC of size 40x40x50 cm in cement concrete 1:3:6 (20mm graded stone aggregate), including necessary excavation in hard/soft/ loose soil, returning, filling in and removal of surplus soil upto a distance of 50 m and all as specified and as directed.

Supplying and installed desert cooler electric driven (single phase), having nominal air flow capacity of 4000 Cum per hour (or nearest size). Size of Desert Cooler - L x b x h 660 x 660 x 825 mm (26" x 26" x 32.5") approx Body: (i) steel body Top cover and pillars of 18 SWG (1.20 mm) thick GI Sheet (ii) Side panels of 20 SWG (1.00 mm) GI Sheet (iii) Tank Height 7" made of 18 SWG (1.20 mm) GI Sheet (iv) Front grill and directional grill of GI Sheet. (v) Including iron stand made up of 40 mm angle iron Fan Motor : (i) Exhaust fan motor should be copper winding, 500 mm sweep cooler fan, double ball bearing, three speed (High/Medium/Low) with metalic blade duly painted with synthetic anti corrosive oven cured paint fitted to body fan motor (ii) Input cap 200 watt(approx), Speed 1400 RPM, 230 Volts, 50 Hz, Air delivery 4000 Cum/Hrs Submersible Pump Motor: Input cap 40 watt (Approx), 230 volts, 50 Hz. Switches/Regulator: One piano switch and one speed selector switch (Regulator) 04 position for controll of Pump Motor and fan motor respectively will be provided on the body. Pads : Wood wool pads of proper thickness will be provided in each panel (Set of three). Drain Plug : Brass drain plug shlall be provided from pump motor to three panel fitted on the cooler body along with 01 nos of float valve. Cord : Flexible cord PVC Shethed and Insulated size 40/0.25 mm (1.5 Sqmm) 3 core (as per IS 694/1977) length 5 Mtr long with three pin 5 Amp ISI marked Bakelite plug Top shall be provided for power supply to cooler. Note : (i) All desert cooler should be fitted on first floor or second floor minium height is 8 mtr (ii) Contrctor should be provide all Sefty material for worker for installation of desert Cooler (iii) Contrator should be submitted 01 year guarntee/Waranty of desert fan motor and submersibale pump Motor.

S&F of ceiling fans complete with blades, down rods, canopy, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CMM with service value 6.00 BEE 5 star rated with brushless direct current motor (BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed.

Supply, installation, testing and commissioning of 25 Litre capacity electric storage water heater (geyser), BEE 5 star rating, suitable for 230 V ±10%, 50 Hz, single phase AC supply, with minimum 2KW heating element, high-quality corrosion-resistant inner water tank with suitable protective coating, high-density PUF thermal insulation, durable outer body, adjustable thermostat with thermal cut-out/overheat protection, temperature control, neon indication for power/heating, safety valve, non-return valve,45CM long steel braided inlet/outlet connections piece, drain arrangement and suitable wall-mounting brackets including making good and match existing surfaces of wall as per existing. Complete with all necessary accessories including suitable GI/PPR/CPVC connecting pipes, isolation valve, flexible connections, plumbing fittings, angle cocks, electrical cable connection complete all as specified and directed

Supply and fixing GI pipe medium grade with all fitting fixed on wall with all connection accessories of size 15 mm bore complete all as specified and directed.

M&L for hot water tap of brass/gun metal 15 mm bore complete all as specified and as directed by Engr-in-charge.

S&F of gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm dia complete all as specified and directed.

S&F of sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and directed.

S & F of MCB, 10 to 32 Amp, SP, 240 Volt complete all as specified and directed.