Construction and development of MRF Sheds in Kollegal CMC of Chamarajanagar District.

Construction and development of MRF Sheds in Kollegal CMC of Chamarajanagar District.

KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricad...

KSRB 2-2.1.2: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as p...

KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coar...

KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking...

KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) ---- as per the directions of...

KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site...

KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 confo...

KSRB 8-8.3.1: Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

KSRB 8-8.51 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth comp...

KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, ...

KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifica...

KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approv...

Electrical Works for MRF Sheds in Kollegal CMC of Chamarajanagar District.

LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system. Completely made by CRCA fabricated, powder coated paint finished f...

Sub panel-1, Incomer : MCB TPN 63A with CBCT ELR & Ph indOutgoings: 40/63A 4P MCB feeder- 10No.icators, section with all parameterOutgoings: 16A Industrial socket-02Nos.s as required, 63A 4 Wire 16kA ...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 3.5Cx50 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx25 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx16 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx10 Sqmm Cu Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx6.0 Sqmm Cu Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 3Cx6.0 Sqmm Cu Un Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 3Cx4.0 Sqmm Cu Un Ar cable ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 70 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 25 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 16 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 10 Sqmm Cu Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 6.0 Sqmm Cu Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 6.0 Sqmm Cu Un Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 4.0 Sqmm Cu Un Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 1.0 Sqmm C...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.5 Sqmm Cu...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 2.5 Sqmm C...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 4.0 Sqmm C...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 6.0 Sqmm C...

Switches & sockets outlets in Existing modular box, 6A one way switch ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, 6A Two way switch ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, 6A 5Pin socket ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, Stepped fan regulator ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, 6/16A Universal socket ---- as per the directions of the Engineer-in-charge

Light fixture, Supply & fixing of 100W LED light fixture IP 65, included screws accessoris Etc, Considered outdoor type light fitting for equivalent ---- as per the directions of the Engineer-in-charg...

Earthing, 25x6mm GI Earth Strip ---- as per the directions of the Engineer-in-charge

Earthing, 8.0 SWG GI bare wire ---- as per the directions of the Engineer-in-charge

Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall, Supply & installation of GI Lad...

Pipe earthing, Supply & installation of GI PIPE Earthing as per IS:3043 with all installation details ---- as per the directions of the Engineer-in-charge

Construction and development of MRF shed in Kollegal CMC of Chamarajanagar District

KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricad...

LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system. Completely made by CRCA fabricated, powder coated paint finished f...

KSRB 2-2.1.2: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as p...

Sub panel-1, Incomer : MCB TPN 63A with CBCT ELR & Ph indOutgoings: 40/63A 4P MCB feeder- 10No.icators, section with all parameterOutgoings: 16A Industrial socket-02Nos.s as required, 63A 4 Wire 16kA ...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coar...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) ---- as per the directions of...

KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site...

LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 3.5Cx50 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge

KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 confo...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx25 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge

KSRB 8-8.3.1: Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx16 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx10 Sqmm Cu Ar cable ---- as per the directions of the Engineer-in-charge

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 4Cx6.0 Sqmm Cu Ar cable ---- as per the directions of the Engineer-in-charge

KSRB 8-8.51 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth comp...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 3Cx6.0 Sqmm Cu Un Ar cable ---- as per the directions of the Engineer-in-charge

KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class, 3Cx4.0 Sqmm Cu Un Ar cable ---- as per the directions of the Engineer-in-charge

KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, ...

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 70 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 25 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifica...

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 16 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approv...

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 10 Sqmm Cu Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 6.0 Sqmm Cu Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 6.0 Sqmm Cu Un Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point, 4.0 Sqmm Cu Un Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points, Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 1.0 Sqmm C...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.5 Sqmm Cu...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 2.5 Sqmm C...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 4.0 Sqmm C...

Circuit main wiring, Supply & wiring from distribution board to looping switch boards, Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit, 6.0 Sqmm C...

Switches & sockets outlets in Existing modular box, 6A one way switch ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, 6A Two way switch ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, 6A 5Pin socket ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, Stepped fan regulator ---- as per the directions of the Engineer-in-charge

Switches & sockets outlets in Existing modular box, 6/16A Universal socket ---- as per the directions of the Engineer-in-charge

Light fixture, Supply & fixing of 100W LED light fixture IP 65, included screws accessoris Etc, Considered outdoor type light fitting for equivalent ---- as per the directions of the Engineer-in-charg...

Earthing, 25x6mm GI Earth Strip ---- as per the directions of the Engineer-in-charge

Earthing, 8.0 SWG GI bare wire ---- as per the directions of the Engineer-in-charge

Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall, Supply & installation of GI Lad...

Pipe earthing, Supply & installation of GI PIPE Earthing as per IS:3043 with all installation details ---- as per the directions of the Engineer-in-charge