Certain repair work to steel and wooden furniture including painting and polishing at Mil Stn Kapurthala and APS Kapurthala under GE Kapurthala.

Amount

ALMIRAH STEEL LARGE (Ser 01 to 05) Removing of old unsv shelves and S&F of new 1mm thick PGI Sheet shelves and fixing in position complete all as specified and as directed by Engr-in-Charge. FD-1031.

Removing of old unsv/broken legs and S&F new legs out of 1.00mm thick PGI sheet complete all as specified and as directed by Engr-in-Charge. FD-1031.

Removing of old unsv locks and S&F new locks to steel almirah large complete all as specified and as directed by Engr-in-Charge. FD-1031.

All as per Srl item No 03 above but CP handle (as per existing size) complete all as specified and as directed by Engr-in-Charge. FD-1031.

M&L for painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and as directed by Engr-in-Charge. FD-1031.

ALMIRAH STEEL SMALL (Ser 06 to 10) Removing of old unsv shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position including 02 coats of synthic enamal paint over a coat of red oxide primer by spray painting complete all as specified and as directed by Engr-in-Charge. FD-1032.

Removing of old unsv/broken legs and S&F new legs out of 1.00 mm thick PGI Sheet complete all as specified and as directed by Engr-in-Charge. FD-1032.

Removing of old unsv locks and S&F new locks to steel Almirah small, complete all as specified and as directed by Engr-in-Charge. FD-1032.

All as per Srl item No 08 above but CP Handle, complete all as specified and as directed by Engr-in-Charge.

M&L for painting of steel Almirah small with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and as directed by Engr-in-Charge. FD-1032.

CHAIR VARANDAH (Ser 11 to 13) Removing of old unsv PVC Bottom Seat from Chair Verandah and S&F of new PVC bottom seat of chair varandah complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/06.

All as per Srl item No 11 above but back of seat of Chair Verandah, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/06.

M&L for painting of Chair Verandah with two coats of synthetic enamel paint white including preparation of surfaces, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/06.

BED HARD STEEL (Ser 14 to 16) Replacement of old unsv plank made of 18mm thick Pre-Laminated Particle Board from Head rest and foot rest and S & F of new plank made of 18mm thick Pre-Laminated Particle Board of suitble size to both side with screw complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/08(R).

Removing of old unsv plywood and supply & fixing New ply wood BWR commercial of size 6.5'x3'x12mm thick to same plateform with nut and bolt of suitable size complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/08(R).

M&L for painting to Bed Hard Steel with two coats of synthetic enamel paint black including preparation of surfaces complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/06.

ALMIRAH LARGE STEEL (Ser 17 to 19) Removing of old unsv locks and S&F new locks to steel almirah large, complete all as specified and as directed by Engr-in-Charge. FD/E6/Map/18.

All as per Srl item No 17 above but CP handle (as per existing size) complete all as specified and as directed by Engr-in-Charge. FD/E6/Map/18.

M&L for painting of steel Almirah large with two coats of synthetic enamel paint Black colour in side and out side including preparation of surfaces complete all as specified and as directed by Engr-in-Charge. FD/E6/Map/18.

CHARPOY WITH HARD TOP (Ser 20 to 21) Removing of unsv plywood and supply & fixing New ply wood BWR commercial size 6'x3'x12mm thick to same plateform with nut and bolts as suitable size complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/01.

M&L for painting to Charpoy IP Hard Top with two coats of synthetic enamel paint black complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/06.

TABLE 900 X 600 X 760 MM STEEL WITH AND WITHOUT DRAWER (Ser 22 to 24) Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging ccomplete all as specified and as directed by Engr-in-Charge. FD-1007/1008 Make: Century/Greenply/Action Tesa

M&L for painting of table with drawer with one coat of synthetic enamel paint OG over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed by Engr-in-Charge. FD-1007/1008.

All as per Srl items 23 above but table without drawer, complete all as specified and as directed by Engr-in-Charge. FD-1007/1008.

Hat Stand with Mirror (Ser 25 to 26) Removing of old UNSV hooks and S & F new hooks made of aluminium, complete all as specified and as directed by Engr-in-Charge. FD-233.

M&L for malemine polishing of Hat stand with Mirror complete all as specified and as directed by Engr-in-Charge. FD-233.

CHAIR DINING Offrs (Ser 27 to 32) Removing of old unsv Rexine cover from bottom seat of chair and S&F new rexine cover to bottom seat as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/10.

Removing of old unsv front leg & S&F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/10.

All as per Srl item No 28 here in before but rear leg -ditto- FD/MAP-II/10.

All as per Srl item No 28 above but side /front /rear rails of seat FD/MAP-II/10

All as per Srl item No 28 here-in-before but stiffener -ditto- FD/MAP-II/10

M&L for malemine polishing of chair dinning complete all as per drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/10

RECEPTICLE PVC S&F of recepticle PVC, complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/13.

CHAIR CB STEEL WITH ARMS (Ser 34 to 37) Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nut and bolt complete all as specified and as directed by Engr-in-Charge. FD-75(M).

All as per Srl item No 34 above but back of Seat, complete all as specified and as directed by Engr-in-Charge. FD-75(M).

Removing of old unsv arms and S&F new arms rest of teak wood including polishing complete all as specified and as directed by Engr-in-Charge. FD-75(M).

M&L for Painting of one coat of synthetic enamel paint OG to chair complete incl preparation of old painted surface complete all as specified and as directed by Engr-in-Charge. FD-75(M).

Shoe Rack Steel M&L for painting of one coat of synthetic enamel paint Black to shoe rack steel incl preparation of old painted surface complete all as specified and as directed by Engr-in-Charge.FD/E6/MAP/02(R).

CHAIR CB STEEL WITH OUT ARMS (Ser 39 to 41) Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nuts and bolts, complete all as specified and as directed by Engr-in-Charge. FD-75(M).

All as per Srl item No 39 as above but back of seat, complete all as specified and as directed by Engr-in-Charge. FD-75(M).

M&L for painting of one coat of synthetic enamel OG paint incl preparation of old painted surface complete all as specified and as directed by Engr-in-Charge. FD-75(M).

CHAIR EASY (Ser 42 to 48) Replacement of old unsv legs with new Shisham wood legs well seasoned free from shake and knots ccomplete all as specified and as directed by Engr-in-Charge. FD-229.

All as per Srl item No 42 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning, complete all as specified and as directed by Engr-in-Charge. FD-229.

All as per Srl item No 42 above but back bottom size - 480 x20 x100mm, complete all as specified and as directed by Engr-in-Charge. FD-229.

All as per Srl item No 42 here-in-before but stiffener of size 50 x 25 x 500mm, complete all as specified and as directed by Engr-in-Charge. FD-229.

All as per Srl item No 42 here-in-before but arms of size as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-229.

M&L for melamine polishing to chair easy complete all as per drg, complete all as specified and as directed by Engr-in-Charge. FD-17/229.

Re-canning of Chair Easy with half round plastic cane of 2mm wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border,complete all as specified and as directed by Engr-in-Charge. FD-17/229.

BATH STOOL PVC Supply and fixing of Bath Stool PVC, complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/06.

TABLE CENTRE (Ser 50 to 54) Replacement of old unsv top and providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as per drawing, complete all as specified and as directed by Engr-in-Charge. FD-274,235.

Replacement of old unsv legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and complete all as specified and as directed by Engr-in-Charge. FD-274,235.

All as per Srl item No 51 above but long rail, complete all as specified and as directed by Engr-in-Charge. FD-274,235.

All as per Srl item No 51 above but short rail, complete all as specified and as directed by Engr-in-Charge. FD-274,235.

M&L for melamine polishing to table centre complete all as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-274,235.

CHAIR VARANDAH (Ser 55 to 58) Re-canning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg complete all as specified and as directed by Engr-in-Charge. FD-256.

S&F hard rubber shoes suitable for chair Varandah, complete all as specified and as directed by Engr-in-Charge. FD-256.

M&L for welding to Chair Vareandah where required n.exc 2.5cm in length complete all as specified and directed. FD-256

M&L for Painting of one coat of synthetic enamel paint White to chair Verandah incl preparation of old painted surface complete all as specified and as directed by Engr-in-Charge. FD-256.

TABLE OFFICER STEEL (Ser 59 to 62) Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and as directed by Engr-in-Charge. FD-1003. Make: Century/Greenply/Action Tesa

M&L for painting of table officer steel with one coat of synthetic enamel paint OG including preparation of surface complete all as specified and as directed by Engr-in-Charge. FD-1003.

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and as directed by Engr-in-Charge. FD-1003.

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Offrs Steel, complete all as specified and as directed by Engr-in-Charge. FD-1003.

Charpoy GI Pipe Removing of Old UNSV plywood from Charpoy GI Pipe and tightning of complete charpoy and S&F of New plywood (BWR) Commercial type of size 2000mmx900mmx12mm thick fixed with 10 nos nut & bolts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm, 850mm long as directed by Engr-in-Charge. Plywood shall be ISI marked and shall be make of - Duraply/ Kitply/ Archid/ Century/ Greenply, complete all as specified and as directed by Engr-in-Charge. FD-220.

TABLE PEG (Ser 64 to 68) Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round c as shown on drawing, complete all as specified and as directed by Engr-in-Charge. FD-277/384.

Replacement of old unsv legs with new Shisham wood legs well seasoned free from shakes and knots complete all as specified and as directed by Engr-in-Charge. FD-277/384.

All as per Srl item No 65 above but long rail, complete all as specified and as directed by Engr-in-Charge. FD-277/384.

All as per Srl item No 65 above but short rail, complete all as specified and as directed by Engr-in-Charge.FD-277/384.

M&L for melamine polishing to table peg complete all as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-277/384.

MIRROR DRESSING GENTS (Ser 69 to 75) S&F new back of dressing mirror gents made out of 12 mm thick commercial ply wood rest all as shown on drg and complete all as specified and as directed by Engr-in-Charge. FD-E6/MAP/16.

Removing of existing unsv sides of dressing mirror gents and S&F new side of size 1200 X 100 mm made out of 18mm thick prelaminated particle board exterior grade with decorative finish both side, rest all as shown on drg and complete all as specified and as directed by Engr-in-Charge.

Removing of existing unsv Top/Bottom of dressing mirror gents and S&F new side (Top/Bottom) of size 600 X 100 mm made out of 18mm thick prelaminated particle board exterior grade with decorative finish both side, rest all as shown on drg and complete all as specified and as directed by Engr-in-Charge.

S&F in repairs of glass shelves of dressing mirror gents 5 to 5.5 mm thick including supply & fixing of runner/glass holder to the dressing mirror gents, rest all as shown on drg and complete all as specified and as directed by Engr-in-Charge.

S&F in replacement looking mirror 5.5mm thick backed by 12mm thick BWR grade ply as per IS-303 covered by decocrative PVC mould and supported on 50x28mm Teak wood frame complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of continous piano hinges to open the mirror frame in horizental circle complete all as specified and as directed by Engr-in-Charge.

S&F magnetic catcher-02 Nos at top & bottom, inside the cabinet to catch mirror frame of best quality duly apporved complete all as specified and as directed by Engr-in-Charge.

TABLE DINNING 6 PERSON (Ser 76 to 85) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging around complete all as shown on drg & complete all as specified and as directed by Engr-in-Charge. FD-273.

Replacement of old unsv leg with new shisham wood leg well seasoned free from shake and knots complete as per drg & complete all as specified and as directed by Engr-in-Charge. FD-273.

All as per Srl item No 77 above but top long rail, complete all as specified and as directed by Engr-in-Charge. FD-273.

All as per Srl item No 77 above but top short rail, complete all as specified and as directed by Engr-in-Charge. FD-273.

M&L for malemine polishing of table dinning for 6 persons complete all as specified and as directed by Engr-in-Charge. FD-273.

CHAIR DINING (Ser 81 to 86) Removing of old unsv front leg and S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-1105 & FD-279.

All as per Srl item No 81 here in before but rear leg -ditto-, complete all as specified and as directed by Engr-in-Charge. FD-1105 & FD-279

All as per Srl item No 81 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning, complete all as specified and as directed by Engr-in-Charge. FD-1105 & FD-228.

All as per Srl item No 81 here-in-before but stiffener -ditto-, complete all as specified and as directed by Engr-in-Charge. FD-1105 & FD-279.

M&L for malemine polishing of chair dinning complete all as per drg, complete all as specified and as directed by Engr-in-Charge. FD-1105 & FD-279.

Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and complete all as specified and as directed by Engr-in-Charge. FD-1105 & FD-279.

CHAIR WRITING (Ser 87 to 93) Replacement of old unsv front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-280/250.

All as per Srl item No 87 above but rear leg, complete all as specified and as directed by Engr-in-Charge. FD-280/250.

All as per Srl item No 87 above but seat frame & S & F new seat frame bottom made of 1st class hard wood (Shisham) with 3mm dia hole for re-canning as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-280/250.

All as per Srl item No 87 here-in-before but stiffeners -ditto-, complete all as specified and as directed by Engr-in-Charge. FD-280/250

All as per Srl item No 87 here-in-before but arms, complete all as specified and as directed by Engr-in-Charge. FD-280/250.

M&L for malemine polishing of chair writing complete all as per drg, complete all as specified and as directed by Engr-in-Charge. FD-280/250.

Re-canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and complete all as specified and as directed by Engr-in-Charge. FD-280/250.

Sofa Set 5 Seated (Ser 94 to 97) Removing of old unsv front leg & S&F new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/02.

Removing of old unsv rear leg & S&F new rear leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/02.

Removing of old unsv hand rest & S&F new hand rest made of Ist class hard wood (shisham) duly smoothed of size 730x70x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/02.

Smoothning of external surface of sofa (Five Seated 3+1+1) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/02

Table Bed Side Removing of old UNSV 14" Telescopic Channel from drawer and S&F new telescopic channel to drawer, complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/15(R).

TABLE 900 X 600 X 760 MM WITH OR W/O DRAWERS (Ser 99 to 105) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round,complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

All as per Srl item No 100 above but top long rail, complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

All as per Srl item No 100 above but top short rail, complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

All as per Srl item No 100 above but stiffener, complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick pre-laminated particle board natural teak shade at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs as shown on drawing & complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

M&L for melamine polishing to table 900X 600X760mm without or with drawer as shown on drawing & complete all as specified and as directed by Engr-in-Charge. FD-223, 224.

TEAPOY (Ser 106 to 110) Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated Particle Board natural teak shade including 3mm thick teak wood edging all-round complete all as specified and as directed by Engr-in-Charge. FD-278.

Replacement of old unsv legs with new Shisham wood legs duly smoothed, size and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-278.

All as per Srl item No 107 above but long rail, complete all as specified and as directed by Engr-in-Charge. FD-278.

All as per Srl item No 107 above but short rail, complete all as specified and as directed by Engr-in-Charge. FD-278.

M&L for melamine polishing to table Teapoy complete all as specified and as directed by Engr-in-Charge. FD-278.

BED PLYWOOD TOP (Ser 111 to 115) Removing of old unsv head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood, polishing as shown on drg and complete all as specified and as directed by Engr-in-Charge. FD-246.

All as per Srl item No 111 above but foot board, complete all as specified and as directed by Engr-in-Charge. FD-246.

Removing of old unsv long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and complete all as specified and as directed by Engr-in-Charge. FD-246.

Removing of old unsv top and S&F new top of 12mm thick ply wood commercial with screws complete all as specified and as directed by Engr-in-Charge. Plywood shall be ISI marked and shall be of Make-Duraply/Kitply/Century/Greenply/Archid. FD-246.

M&L for melamine polishing to Bed plywood top as shown on drawing & complete all as specified and as directed by Engr-in-Charge. FD-246.

TABLE DINNING 6 PERSON (Ser 116 to 120) Replacement of old unsv top by providing new 18/19mm thick pre-laminated Particle Board natural teak shade all as shown on drg & complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

All as per Srl item No 117 above but top long rail, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

All as per Srl item No 117 above but top short rail, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

M&L for melamine polishing to table dinning 6 person all as as shown on drawing & complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

TEAPOY VERANDAH (Ser 121 to 124) Removing of old unsv top and S&F new top made out of 18mm pre-laminated Particle board including 3mm thick teak wood edging all round all as shown on drg & complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/17.

M&L for two coats painting of synthetic enamel paint, black shade including preparation of old painted surface all as per drg and complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/17.

M&L for welding of steel frame where required n.exc 2.5 cm in length complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/17.

S&F PVC shoes fixed on 18mm dia MS Square pipe complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/17.

TABLE DRESSING LADIES WITH MIRROR (Ser 125 to 133) Removing of old unsv top & supply & fixing new top with Plywood commercial 18mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished, complete all as specified and as directed by Engr-in-Charge. FD-378.

Removing of old unsv bottom and S&F new bottom made out of ply wood one side teak face 18mm thick complete all as specified and as directed by Engr-in-Charge. FD-378.

Removing of old unsv both sides of table and S&F new sides with particle board 12mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade ccomplete all as specified and as directed by Engr-in-Charge. FD-378.

Removing of old unsv back & S&F new back made out of plywood commercial 6mm thick confirming to ISI complete all as specified and as directed by Engr-in-Charge. FD-378.

Removing of old unsv ply wood of drawer and S&F new ply wood commercial 4mm thick conforming to ISI complete all as specified and as directed by Engr-in-Charge. FD-378.

Removing of old unsv mirror & S&F new looking mirror for table dressing ladies (size 1220x360x5mm) thick electro copper plated duly fixed in shisham wood frame & back side covered with plywood commercial 4mm thick confirming to ISI, wooden frame shall be french polished, complete all as specified and directed by Engr-in-Charge. FD-378.

Removing of old unsv knob and S&F new M.S. knob 25mm dia dark brown coloured complete all as specified and as directed by Engr-in-Charge. FD-378.

Removing of old unsv glass and supply & fixing new sliding glass 4mm thick with aluminum channel, size and shape as shown on drg complete all as specified and as directed by Engr-in-Charge. FD-378.

Smothening of old & new external surfaces with sand paper removing of balck dots and matching of the newly fitted components with original shade by polishing the complete all as specified and as directed by Engr-in-Charge. FD-378.

TEAPOY VERANDAH (Ser 134 to 137) Removing of old unsv top and S&F new top made out of 18mm prelaminated particle board including 3mm thick teak wood edging all round all as per drg and complete all as specified and as directed by Engr-in-Charge. FD-255/383.

M&L for two coats painting of synthetic enamel paint, white shade including preparation of old painted surface complete all as specified and as directed by Engr-in-Charge. FD-255/383.

M&L for welding of steel frame where required n.exc 2.5 cm in length complete all as specified and as directed by Engr-in-Charge. FD-255/383.

S&F PVC shoes fixed on 20mm dia conduit pipe complete all as specified and as directed by Engr-in-Charge. FD-255/383.

CHAIR WRITING (Ser 138 to 139) M&L for carrying out removing of old unsv bottom seat and S&F of new bottom seat fully covered with tapestry cloth superior quality of chair writing steel all as per drg & complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/12.

All as per Srl item No 138 above but back of seat of chair writing steel all as per drg & complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/12.

CHAIR COMPUTER (Ser 140 to 142) Repair & replacement adjustable back rest shall consist of droplift mechanism and shall be adjusted in the range of 65mm and can be locked in 5 steps for better lumbers supports as shown in drg & complete all as specified and as directed by Engr-in-Charge. FD/E6/MAP/01.

Repair & replacement 12mm thick hot pressed by plywood upholster (bottom Seat) with fabric and moulded polyurethane foam as shown in drg & complete all as specified and as directed by Engr-in-Charge.

Repair and replacement padestral assy injection moulded in black in 30% filled nylon 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors. It is 600mm pitch centre dia as shown in drg, complete all as specified and as directed by Engr-in-Charge.

Locker Steel (Ser 143 to 145) Repair to locker steel ie welding to locker where ever required and removing of dents and applying one coat of synthetic enamel paint by spray painting OG shade inside and outside complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv hasp and staples (locking device) and S & F new hasp and staples 100 mm long duly screwed of best quality as approved by GE, complete all as specified and as directed by Engr-in-Charge.

Removing of old unsv broken legs & S&F new legs made out of sheet PGI sheet 1mm thick complete all as specified shown on drg and complete all as specified and as directed by Engr-in-Charge.

TABLE OFFICE CLERK STEEL (Ser 146 to 149) Removing of unsv top of table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and as directed by Engr-in-Charge. Make: Century/Greenply/ Action Tesa. FD-1004.

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Office Clerk Steel, complete all as specified and as directed by Engr-in-Charge. FD-1004.

M&L for painting of table office clk steel with one coat of synthetic enamel paint OG including preparation of surface complete all as specified and as directed by Engr-in-Charge. FD-1004.

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and as directed by Engr-in-Charge. FD-1004.

Sofa Set 5 Seated (Ser 150 to 158) Removing of old unsv front leg and S&F new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-373.

Removing of old unsv rear leg & S&F new rear leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-373.

Removing of old unsv hand rest & S&F new hand rest made of Ist class hard wood (shisham) duly smoothed of size 730x70x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-373.

Removing of old unsv seat frame long rail and S&F new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 650x100x35 mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Removing of old unsv seat frame long rail and S&F new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 1650x100x35mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-373.

Removing of old unsv seat frame short rail and S&F new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 580x100x350mm and shape as shown on drg, complete all as specified and as directed by Engr-in-Charge. FD-373.

Smoothning of external surface of sofa (Five Seated 3+1+1) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish, complete all as specified and as directed by Engr-in-Charge. FD-373.

Supply only cushion of foam size 500 x 525 x 100mm of density 32 to 40, complete all as specified and as directed by Engr-in-Charge.

Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality as approved by GE, complete all as specified and as directed by Engr-in-Charge.

Table Dinning JCOs/OR (Ser 159 to 163) Replacement of old unsv top by providing new 18/19mm thick pre-laminated Particle Board natural teak shade complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

All as per Srl item No 160 above but top long rail, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

All as per Srl item No 160 above but top short rail, complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

M&L for melamine polishing to table dinning 6 person as shown on drawing & complete all as specified and as directed by Engr-in-Charge. FD/MAP-II/03.

SANMATI UDYOG (BID ID -3132391)