Balance work for construction of Indoor Stadium at Arhama Shopian

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil

Filling with available earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 em), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of EARTH, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in -charge. Note

Disposal of excavated material from site to site of disposal by mechanical means upto 6 km.

Supply and filling of boulders as a SOLING media/bacfiliing incl carriage,loading and unloading complete job.

SUPPLY anfd filling of nallah muck inside plinth including carriage ,loading and unloading necessary watering and compaction in layers complete job.

Bricks work with common burnt clay F.P.S (non modular) bricks of class desi- 75 in superstructure including extra charges above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 :6(1 cement : 6 coarse sand)

Dry Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal and external cement sand plaster of thickness 15mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand.

Application of cement sand plaster of thickness 6mm with a cement sand mortar of mix 1:3 in ceilings including scaffolding curing and including cost of cement, sand.

Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering - All work up to level 5: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - : 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - : 1:3 :6 (1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size. .

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete (SOMANY, KAJARIA MAKE) with antiskid properties Size of tile 600x600 mm

Providing and laying antiskid Vitrified tiles for bath areas in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.(SOMANY,KAJARIA MAKE) Size of tile 600x600 mm

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges 75x60x3.10 mm mm with necessaryscrews.

Providing and fixing of first class Kailwood wire gauge shutters 35 mm thick using stainless steel MS wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including with hinges and necessary screws : lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size

Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with Metal primerWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Applying priming coats with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Providing and fixing of MILD steel Grill panels fabricated from mild steel sections(square bars,flats,ISA ETC.) inclusive electric,machinery charges,adhesives like araldite complete job including application of metal primer of approved brand.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making goodthe wall wherever required : Size 450x500x150 mm

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Deodar wood

Labour charges for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.excluding cost ofThermo-Mechanically Treated bars for all levels. Tor Steel available at site

Centering and shuttering including strutting, propping etc. and removal of formwork for Suspended floors, roofs, landings, balconies and access platform at any level for all prop heights,inclusive all type of staging and propping.

Centering and shuttering including strutting, propping etc. and removal of form for Columns,Walls Pillars, Piers, Abutments, Posts and Struts at any level for all prop heights,inclusive all type of staging and propping.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

P/F of below mentioned CP fittings (Jaquar series) or equivalent including c/o screws electric and machinery charges complete job..

CP Brass Sink MIXER(jaquar/marc)

CP Brass Wall MIXER(jaquar/marc)

CP Brass Basin MIXER(jaquar/marc)

CP Brass Bibcock(jaquar/marc)

CP Brass Angle valve(jaquar/marc)

CP Brass Grating

CP Brass Soap case

CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

15mm Dia GI Pipe(.5'inch)Medium

20mm Dia GI Pipe (.75'inch))Medium

25mm Dia GI Pipe (1.0'inch))Medium

Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

Brass Ball valve (1")

Brass Ball valve (1 1/4")

GI Union (1")

GI Union (1 1/4")

Tank nipple (1")

Tank nipple (1 1/4")

Ball cock

Providing and fixing of sintex/comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

Providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

160mm OD UPVC Prince B Type

110mm OD UPVC Prince B Type

75mm OD UPVC Prince B Type

50mm OD UPVC Prince B Type

Supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

4"floor trap

4" p trap

4"door bend

4"door T

4" Cowel

3" door bend

3" door Tee

3"floor trap

Providing and fixing of Builders Hardware including cost of screws.

AlUMUNIUM Aldrops 10" (250 X 16MM)

AlUMUNIUM Tower Bolts 6"

AlUMUNIUM Handles 4"

AlUMUNIUM Handles 5"

AlUMUNIUM Tower Bolts 4"

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 1.0 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of storage type vertical hot water heater (Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet (Venus, Racold, Havells) make 50 LTR. Capacity

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed. Incl cost of 4 mm thick glass strips.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Killogram 573.50 as nuts, bolts, fasteners etc. 10

Providing and fixing of 4mm thick glass pans including cost of beading 25mm wide and 15mm thick incl cost of nails and also in alumunium partitiond with EPDM RUBBER and alumunium Snap beading

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.1 In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and SIMILAR WORKS.

Providing and fixing of Budloo wood hand rail carved out of 75mm x 100 mm with necessary champers and rounding at top and sides including 40mm x 6mm recess at bottom to receive the steel rail top.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing, panelling)Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge.(5MM THICK GLASS PANES)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing of necessary spider fittings and cleats,screws and fastners with silicon jointing at edges and joints.Including double action floor spring.

Providing and fixing of Aluminium Composite Panel (ACP) Alistone or equivalent brand of approved pattern and design as per the direction of engineer incharge including (alumunium framework with extruded built up standard tubular section 25mm x 40mm of approved make jindal or equivalent conforming to IS 1285 3mm thick fixed to steel truss with necessary fastening arrangement.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel On concrete work SURFACES

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)

Providing and fixing of 5mm thick glass pans including cost of BUDLOO beading 25mm wide and 15mm thick incl cost of nails

Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :A)T.BOLTS 150MM

B)HANDLES 150MM

C)ALDROPS LINK 200MM

C)ALDROPS LINK 300MM

Providing and fixing ALUMUNIUM powder coated fittings including necessary screrw nut,bolts and washers including all cosequential and incidental costs.

A)T.BOLTS 100MM

B)HANDLES round shaped 100MM

Supply and application of POP average thickness upto 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smo

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor 22.0 (Aluminum Work) 290CODE NO.DESCRIPTION UNIT RATE ₹finishing and cover plates with brass pivot and single piece M.S. sheetouter box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in- charge. 22.4.1 With Stainless Steel cover plate minimum 1.25 mm thickness.

Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 22.8.1 Upto 5mm depth and 5mm width

Providing and fixing of Prelaminated particle board flat pressed with decorative laminations both sides three layer or graded wood particle board conforming to IS 12823 GRADE I TYPE II IN panelling fixed in alumunium doors,windows shutters and partitions with cp brass /stainless steel screws

Providing and fixing structural glazing with powder coated alumunium section conforming to IS 733 AND IS 1285 SAME WORK with 5mm thick sait gobain reflective glass panelling fixed with framework with 3mm pressure taps silicon filling to make water proof with all fittings and fixtures

SHAH CONSTRUCTIONS

MOHD. IDREES BHAT

M/S M.B CONSTRUCTION