8422 REPAIR AND MAINT OF SEWAGE SYSTEM INCLUDING LINE CLEANING MAINHOLE CLEANING SUMP CLEANING AND CERTAIN MISC WORKS AT INS ANGRE NPO BLO INDA NOORBHOY BLDG AND LHS DOCKYARD AND CERTAIN OTHER BUILDINGS UNDER AGE BRII UNDER GE NW KUNJALI

Amount

Cleaning & desilting of manholes depth not exc 1.50 mtr by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed by Engr-in-Charge.

Cleaning & desilting of manholes depth excd 1.50 m but not excd 3.00 m by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc & removing the same(silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules & regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified & directed by Engr-in-Charge.

Cleaning and desilting of sewage lines upto 150mm bore and sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.)

Cleaning and desilting of sewage lines upto 150mm dia but n.exc 300 mm dia and sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.)

Cleaning the chocks/blockages in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and re-fixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia complete all as specified and directed by Engr-in-Charge

Empting septic tanks and manholes exceeding 3.00 mtr depth by providing sewage suction vehicle of capacity 5000 ltrs(BMC Patteren) including necessray other arrangments such as sweepers to clean up the site after work and depositing the same at places earmarked outside MOD land upto 25 KM lead and lift complete one or more times all as specified and directed. Note:- (a) All precautions to be taken by all workers while working in foul condition,Contractor shall take all necessary actions. (b) After cleaning vehicle will be contractors's property. (c) Contractor accredated representive shall be available contractors during cleaning. (d) Complete process shall be completed in all respects within a day.

Cleaning and removal of foreign material from inside the Gully trap/WC Pan, Nahani trap, Floor trap etc including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete one or more times all as specified and directed.

Cutting out & removal of plants, roots, shurbs etc from the roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall with brick works in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like white wash cement base paint etc over 15mm thick rendering in CM 1:4 including disposal of demolished material/ waste out of MD land of Bldg/ ground/stilt plus 4 floors.

Cutting out & removal of plants, roots, shurbs etc from the roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall with brick works in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like white wash cement base paint etc over 15mm thick rendering in CM 1:4 including disposal of demolished material/ waste out of MD land of Bldg/ 5th floor to 8 th floor.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed..

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm (internal dia of pipe) set in cement mortar all as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200 mm (Internal dia of pipe) set in cement mortar all as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 300 mm (internal dia of pipe) set in cement mortar all as directed.

M&L 150 mm dia (Internal diameter of pipe in mm) salt glazed stoneware drain pipes laid in trenches and jointed as specified.

M&L 150 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid and jointed complete with collars all as specified & directed.

M&L 200 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid and jointed complete with collars all as specified & directed.

M&L 300 mm bore (Bore of pipe in mm) reinforced concrete pipes, class NP-2 laid and jointed complete with collars all as specified & directed.

M&L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone agg) to drain pipes 150 mm bore (Bore of pipe in mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.

M&L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone agg) to drain pipes 200 mm bore (Bore of pipe in mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.

M&L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone agg) to drain pipes 300 mm bore (Bore of pipe in mm) including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Excavating in trenches, n.exc 1.5 M wide and n.exc 1.5 M in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 M in depth and gettging out in hard dense soils all as specified.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundations, filling and mass concrete, pot holes etc all as specified.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in surface channels and drains all as specified.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in foundations, filling and mass concrete, post holes, bed blocks etc all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc all as specified,

Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base.

M&L 100 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in hardstanding laid in alternate panel all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified.

Providing precast reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in cement mortar 1:4 all as specified (reinforcement shall be measured & paid seperately).

M&L for RCC 1:2:4 nominal mix (20mm graded stone agg) as in beams, cantilevers, bressumers, lintels over 1.5 m span

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams etc rough finished surface of concrete complete all as specified.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and incl mild Steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

All as per srl item No. 26 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders etc all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in hard/dense soils all as specified.

Removing excavated materials (Soils) exc 1.5 KM but not exc 35.00 KM and depositing where direted.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 39 above but except bricks

M&L for in repair for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

M&L for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 but except stone all as specified and directed.

M&L for flush pointing to random rubble masonry in cement mortar 1:3, uncoursed or brought upto courses

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walk ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each all as specified.

M&L for cleaning the existing drainage/culvert including removing cover slab, soils,spoils, vegetation, silt etc and refixing cover slab including making good and removing waste materials outside MD Land complete all as directed by EIC.

S&F RCC precast drain covers of size 600 x 900mm complete all as specified & directed by EIC.

Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces, surfaces to be finished even and smooth without using extra cement complete all as specified.

M&L plastering 10mm thick in CM 1:4 in ceiling finishing even and smooth without using extra cement.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified.

Taking down eaves gutters and PVC rainwater pipes (any size or pattern) incl all fittings, heads, shoes, bends, swanecks etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories).

Dismantling of cast iron or reinforced concrete drain pipes of any dia fixed to wall and taking out from trenches all as directed.

S&F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs 160 mm dia bore PVC (SWR) bends, single/double 'Y' or 'T' with access doors any radius including fixing clips complete all as specified and as directed .

S&F in repairs 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as directed.

S&F in repairs 75 mm dia bore PVC (SWR) bends, single/double 'Y' or 'T' with access doors any radius including fixing clips complete all as specified and as directed .

S&F in repairs 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal all as directed.

S&F in repairs 160 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as directed.

S&F sand cast type 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors all as specified.

S&F sand cast type 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls all as specified.

S&F sand cast type 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls all as specified.

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) all as specified.

S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) all as specified.

S&F in repairs 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified.

Diito as Item No 68 but Nahani trap

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

M&L for machine pressed chequered cement coloured tiles of size 250mmx250mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and direcetd.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Taking down interlocking paver blocks from the existing surfaces and refixing them in same place after filling the depressions with fine sand and re-laid the paver blocks over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

M&L for Second class hard wood (berma teak wood) solid core minimum thickness 50mm decorated wooden door as per directed by engineer in charge including first class (berma teak wood) decorated beading of any size at the door and construction of arc (radious not less than 90 cm) and outside around the door as per directed by EIC incl all decorated brass fitting such as Linges (brass 5 Inch heavy Linges 5/32x5/32 SS-PIN), heavy loaded foundation box, decorated handle (length not less than 30 Cm), (two number handle in each door shutter)pivot spring, toughend glass/figured glass, glass/plane surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler and applying one or more coats on new wooden surface complete all as specified and directed by EIC.

S&F for decorated second class hard wood (berma teak wood)plain, solid, straight, chowkats and frame, arc, wrought, framed, decorated wooden panelling rebated on the solid, rounded or chemfered or arc, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing old painted surfaces of decorated wood based surfaces of any shape and size on wooden surfaces and replacing the damage wood to regain the original shape and size by first class (berma teak wood) and including french polishing on surfaces of any description, width or girth including cleaning and preparation the surface incl a coat of wood filler and applying one or more coats on old/new wooden surface complete all as specified and directed by Engineer in Charge.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & style plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm thick B.W.P. commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F factory made, 2nd class hard wood 30 mm thick, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wooden particle board with commercial face veneers: supplied and fitted to chowkats etc all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partion/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed by Engr- in- charge.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm long of extruded section.

S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F butt hinges of size 100 mm mild steel hinges medium weight cold rolled.

S&F butt hinges of size 75 mm mild steel hinges medium weight cold rolled.

S & F MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

Disconnecting existing tanks exc 250 but n.exc 500 ltr capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and re-fixing in position all as specified and directed.

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs and reomoving to store.

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs and reomoving to store.

S&F rotational moulded polythylene water storage tank of 500 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms ) all as specified in SSR Part I.

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms ) all as specified in SSR Part I.

S&F rotational moulded polythylene water storage tank of 1000 ltr capacity (Cylindrical vertical with closed top) hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms ) all as specified in SSR Part I.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 290 (Gde-E-165) incl one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified.

S&F in repairs vitreous china wash down water closet Pedestal pattern and trap, including connection to drain (or outgoing pipe) and to flushing pipe antisyphonage pipe etc complete all as specified.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as specified.

S&F in repairs vitreous China squatting pan, (Orissa pattern) size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including lime concrete bedding all as specfified and directed.

Supply and fixed cast iron 'P' trap 100mm dia

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed

S&F in repairs fancy type angle valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle.

S&F fancy type CP two-in-One Bib taps 15 mm dia, cast copper alloy complete all as specified and directed as in repairs.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long complete all as specified and as directed

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed

S & F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level flushing cistern

S&F PVC bathroom cabinet with 4mm thick looking mirror of overall size 450 x 300 x 120 mm of approved tint and pattern and drilling in and fixing with 02 Nos. chromium plated screws complete all as specified and as directed

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repairs Stainless steel Soap dish any type fixed to plugs with chromium plated brass screws.

S&F in repair vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified Fixed in repairs.

S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

S&F in repairs Corner glass shelf with brackets .

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, Fe290-W (Gde E-165), drilled for fixing of steel sheeting or other cover-ing doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Excavation in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface.

M&L for cement concrete 1:2:4 type B-1 ( 20 mm graded stone agg) as in foundation, filling and mass concrete.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiling board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed. (Make -Armstrong/Chanakya/Everest)

S&F stainless steel railing all as specified and directed by Engir-in-Charge.

S & F for Armstrong ceiling made out of 600 x 600x 15 mm thick optra 101(white) acoustics ceiling board/tiles deep panel suspender system made out of Aluminium powder coated main tee of size 24mmx43mmx0.63mm and cross tees of size 30mmx24mmx0.63mm and angle size 19mmx19mmx0.63mm powder coated incl 2.68 GI wire for suspending, bolts, necessary washer,nut/clits/pin hook etc for securing frame work to ceiling to snap grid all as directed by Engineer in-charge incl provn of necessary recesses/projected pattern as directed Make : Armstrong/Dalken/Chankya or equivalant all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of old concrete surfaces of ceiling and applying one coat of white wash on ceiling all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding upto any height of high rise blds etc all as specified and directed.

M&L Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding upto any height of high rise bldgs. etc all as specified.

M&L preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding upto any height of high rise bldgs etc all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying two coats of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparation of surfaces complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper on walls etc all as specified.

S&F in repairs GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S&F in repairs GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and as directed

All as per item No 164 above but 9 mm thick pre-laminated partical board.

M&L for preparation of old decorated surfaces of cement concrete tiles, floor (Paver block/chequerred tiles) applying one coat of floor paint in proportion as per manufacturers instruction as specified and directed.

M&L for grinding and polishing of any type (Kota Stone/Mossiac/Cudappa Stone Floor) Complete all as specified and directed.

MADHU ENTERPRIZES

Sachin santosh dalvi

PRABHU ASSOCIATES

SHIV ENTERPRISE

ROHIT CONSTRUCTION

siddharth and company

BREEZE CONSTRUCTION