PROVN OF BOUNDARY WALL ALONGWITH SLIDING GATE AND OTHER ESSENTIAL FACILITIES IN AUDITORIUM AT CGRA MEENABAKKAM UNDER GE(I) CG CHENNAI

Amount

Excavating over areas not exc 1.5 metre deep and getting out in soft/loose soil complete all as specified and as directed

Removing excavated soil to a distance exceeding 250 meter and not exceeding 1.50 KM depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed

Material and labour for Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded aggregate) as in foundation ,filling and mass concrete complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:3:6 type C-2 (using 40 mm graded aggregate) as in foundation ,filling and mass concrete complete all as specified and as directed.

Material and labour for Brick work with Fly Ash bricks straight or curved on plan exceeding 6 M mean radius as built in cement mortar 1:4 complete all as specifed and as directed

Material and labour for Brick work with Fly Ash bricks 'B' Bricks, straight or curved on plan exceeding 6 M mean radius as in half brick thick wall, built in cement mortar 1:4 complete all as specifed and as directed

Material and labour for Rendering 10mm thick in CM 1:4 on fair faces of brick /masonary wall finished and even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in CM 1:6 on fair faces of brick /masonary wall finished and even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered or unplastered wall surfaces including pilasters and cornices and applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for Preparation of newly plastered surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Supply and fix Stainless steel designer gate (SS Grade 304) Openable with stainless steel frame all around of 2 mm thick,Ornamental and intricate design with pintol hinged and locking arrangements including SS Channels duly welded and buffed complete all as specified and as directed.

Material and labour for Preparation of new or previously untreated steel or iron surface materials of any description not exceeding 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Rolled Mild Steel in roof trusses (framed), trussed purlins .post.rafters,rails and fastenings and heavy bracket framing(Beam,tee,angle,channel,tubular or flat sections ) and placing in position of angle/tubular section confirming to Fe-410 W(Gde-E-250 quality- A ) complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm in soft/loose soil including removal of soil to a distance not exceeding 50m and making good the surface complete all as specified and as directed.

Supply and fix Stainless Steel Tubular truss pipe as in truss purlins, post, rafters etc, including cutting welding and buffing with special shaped washers etc confirming to SS Grade 304 complete all as specified and as directed.

Material and labour for Preparation of new or previously untreated steel or iron surface materials of any description over exceeding 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Supply and spread moorum/red bajri filling in mounds laid in layers n.exc 15 cms thick spread, levelled to the shape of mound and ramming including watering complete all as specified and as directed. Note: Stack measurements shall be considered for payment.

Supply and spread poeta soil (garden soil) mixed with requisite quantity of pesticides and fertilizers while filling complete all as specified and as directed.Note: Stack measurements shall be considered for payment.

Supply and spread dry gober manure mixed with requisite quantity of pesticides and filled along with the garden soil in alternate layers complete all as specified and as directed. Note: Stack measurements shall be considered for payment.

Supply and plant dry American/ korean grass in mud patches and watering etc complete all as specified and as directed.

Supply and plant hedges like Akalita Aspar / Duranta varigated by digging in trenches of size 300mm wide and 300mm deep and filling soil obtained from same location upto 200mm height and balance 100mm depth filled with garden soil and manure mixed in the required proportion and planting hedges of height 300mm above GL and removal of soil, debris, weeds to a distance exc 250m and not exc 500m and watering etc complete all as specified and as directed.

Supply and planting Fox tail palm tree of height 8 feet to 12 feet by digging pit of size 450 x 450 x 600mm and filling soil obtained from same location upto 450mm and balance depth filled with garden soil and manure mixed in the required proportion and planting hedges of height 300mm above GL and removal of soil, debris, weeds to a distance exc 250m and n.exc 500m and watering etc complete all as specified and as directed by the Engineer-in-Charge NOTE:- The rate quoted by the tenderer for item Nos : 23,24 and 25 of BOQ shall be inclusive of 10 % of extra plants supplied during Phase I period and maintenance of plants/Grass during Phase II period . In this connection , the tenderer attention is invited to Schedule A notes Sl Nos : 5,6, 7 a to d ,8 and 9 of tender documents.

Maintaining the plant carpet grass,flower plant etc by watering and providing required manure complete all as specified and as directed. (Phase-II)

Supply and fix powder coated aluminium frame and grills for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Material and labour for Powder coated aluminium snap grid false ceiling of size 605 x 605 mm using standard aluminium sections of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/ Rm as in wall angle, 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/ Rm as in Main/ Cross Tees complete all specified and as directed.Note : (i)Minimum thickness of powder coating 50 microns.(ii)Make of Aluminium Grid : Jindal/Hindalco/Indal

Supply and fixed with grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.and the main runners to be secured to structural soffits by means of ceiling cleats made out of G.I. Flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all specified and as directed.

Supply and fix Gypsum board of size 600x600 mm and 12 mm thick in ceiling fixed with screws/staples complete all as specified and as directed. Make: Lafarge/Gypsum India Ltd /Gyproc/Armstrong

Material and labour for plain cement concrete 1:2:4 type B2 (using 20 mm graded aggregate) ,40mm thick as in floor and hardstanding finshing with broom or MS jali including necessary form work complete all as specified and as directed.

Supply and fix Plain sheet glass pane 4.00 mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for Steel Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200 mm thick Horizontal or sloping etc for rough finished flat surfaces of concrete completre all as specified and as directed.

Material and labour for Reinforced cement concrete 1:1.5:3 concrete type B1 using 12.5 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landing, balaconies , canopies, deck slab and in shelves complete all as specified and as directed

Material and labour for marble work (Makrana white) 18 to 20 mm thick , machine cut (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed.

Material and labour for screed bed in cement mortar 1:4 , 15 mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for Rounding to edges of stone slabs one edge such as in steps,cooking platform and other similar situations complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including consealed non metallic rigid PVC conduit of 20 mm dia along with 1.5 sqmm sheathed FRLS multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 1.6mm thick Modular terminal boxes covered with 3 mm thick laminated hylem sheet cover for mountling switches, socket, fan regulators etc complete for one light/fan point controlled by one switch complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including consealed non metallic rigid PVC conduit of 20 mm dia along with 1.5 sqmm sheathed FRLS multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 1.6mm thick Modular terminal boxes covered with 3 mm thick laminated hylem sheet cover for mountling switches, socket, fan regulators etc complete for one 3 pin socket outlet, 5 Amps independent complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Material and labour for Point wiring with 4 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including consealed non metallic rigid PVC conduit of 20 mm dia along with 4 sqmm sheathed FRLS multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 1.6mm thick Modular terminal boxes covered with 3 mm thick laminated hylem sheet cover for mountling switches, socket, fan regulators etc complete for one 3 pin socket outlet, 15 Amps independent complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and fixing LED lights fitting 20 W 220 V AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible coppper conductor cable of suitable size from ceiling rose complete all as specified and as directed Make: Philips/Wipro/Bajaj/Havells/Crompton

Supply and fix 5 star rated BLDC ceiling fan with remote control , 1200mm sweep suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connected block using PVC insulated sheathed 3 core cable 1.5 sqmm flexible copper conductor complete all as specified and as directed Model: Havells Efficiencia Neo (26 W) or equivalent in Crompton/Orient/USHA/BAJAJ

Supply and fixing LED street light fitting ( as security light to fix around the building) 18/19 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make : Philips, Model: BRPO42 LED19 CW MR S1 PSU GR P4210 or Equivalent in Wipro/CG

Supply and fixing post top lantern LED type 40W 230 Volts AC outdoor type with decorative post for 360 degree indirect light IP 65 Protection with impact and corrossion resistant complete with all as specified and as directed.

Material and labour for single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 V, 20 Amp complete all as specified and as directed. Make: Havells/L&T/ABB

Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 4.0 sq.mm along with earth wire of size 1 x 4.0 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including rigid PVC conduit complete all as specified and as directed. Make of Cable: Finolex/Anchor/Polycab Make of Conduit :Avonplast /Finolex/Prestoplast

Supply and fix modular switch socket combination 3 pin 6 Amp flush type complete all as specified and as directed..Make: Legrand/Anchor/ABB

Supply and fix modular multipurpose switch socket combination 3 pin 15/16 Amp and one pin 6 Amp controlled by one switch as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix one way 6 Amp modular switch of 1 module complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 2 module type it complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 6 module type it complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix modular metal flush box 2 module complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix modular metal flush box 6 module complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix Single pole MCB 32 Amp SPN 240 Volts of rupturing capacity 10KA, C Series complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix MCB 32Amp single pole of rupturing capacity 10KA, C Series complete all as specified and directed .Make: Legrand/Anchor/ABB

Supply and fix sheet metal enclosure powder coated single door for Board distribution with 200 Amps rated bus bar, DB SPN 8 way , 240 Volts suitable for mounting MCBs/Isolators complete all as specified and as directed. Make:Indo Asian/L&T/Siemen

Excavation in trenches n.exc 1.5mtrs wide and n.exc 1.5 mtrs deep in loose/soft for laying underground cables and post holes, complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cms thick in loose/soft soil, complete all as specified and directed .

Removing surplus soil to a distance n. exc 50 m and depositing at a level n. exc 1.5m above the starting point, complete all as specified and directed .

Supply and spread clean dry M sand in trenches including levelling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning shall be measured and paid.

Supply onlycommon burnt clay building bricks subclass 'B' designation of old size bricks 230mm x 115 mm x 75mm to be laid on sand cushioning for protection of cable, complete all as specified and as directed.

Material and labour for 20 mm bore dia GI pipe,light grade including all fittings such as bends elbows, tee, unions, sockets etc laid complete laid in trenches/fixed to walls for cable protection including necessary clamping etc complete all as specified and as directed. Make- TATA/Jindal/Zenith with ISI marked.

Supply and lay XLPE insulated and Fire armoured PVC round sheathed armoured aluminium conductor flexible cable 1100 volts grade of cross sectional area 10 sq. mm, 2 core in / on truss / wall / floor through pipe with MS clampst complete all as specified and as directed.Make:Gloster/CCI/Asian quoted price is inclusive of copper lugs and necessary fitting.

Supply and lay XLPE insulated and Fire armoured PVC round sheathed armoured aluminium conductor flexible cable 1100 volts grade of cross sectional area 6 sq. mm, 2 core in / on truss / wall / floor through pipe with MS clampst complete all as specified and as directed.Make:Gloster/CCI/Asian quoted price is inclusive of copper lugs and necessary fitting.

Supply and fix Weather Proof Cable Junction Box of size 167mmx125 mmx82 mm with terminals for 4-10 sqmm cable , IP 66 protection including mounting arrangements h complete all as specified and as directed. Make : Hensel No: KF 1610G /Sintex.

VIJAYALAKSHMI ENTERPRISES