Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.6 L+₹65,491.26 (1.72%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹39.1 L+₹1.1 L (3.00%)Rejected-Finance 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹39.5 L+₹1.5 L (4.00%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹39.9 L+₹1.9 L (5.00%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS C/o 99 APO Pin-913869
CERTAIN REVENUE WORKS AT LEIMAKHONG MIL STN
2022_MES_545629_1
8430/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹77,000
Yes
19 Dec 2022
20 Sept 2022
24 Oct 2022
20 Sept 2022
21 Oct 2022
7 Oct 2022
Amount
Schedule 'A'
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavation over areas not exc 1.5m deep and getting out in sofe/loose soil complete all as specified and directed.
Ditto all as per item no 3 above but exc 1.5m deep and not exc 3m complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M & L for PCC M-7.5 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
M & L for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
Supply only integral water proofing compound complete all as specified and directed
M&L for PCC type M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formwork complete all as specified and directed.
M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for 75mm thick PCC M-10 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L 25mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed.
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litere as per the LEEDS specification. Anti Algal properties in two coats @ 1.79 ltr (undiluted) / 10sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimun 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note :- (a) The work pertaining to periodical services & water proofing shall be excuted as per manufacturer instructions of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (b) Cost of scaffolding as per requirement of building height is included in this item.
M&L for RCC ( nominal mix) Type B1 1:2:4 ( using 20mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Joint free Non - skid Ceramic tiles in vertical surface 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
M & L for RCC ( nominal mix) Type B1 1:2:4 ( using 20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete vcomplete all as specified and directed.
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto 10mm cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete all as specified and directed
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operatinh single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on surface complete all as specified and directed. Note :- (a) Sanding of surface to be done by mechinical sander with 1500-2700 rpm, with internal dust extraction system for cleaning environment certified by paint manufacturer. Proper mixing to be carried out before primer and paint application. (b) The work pertaining to periodical services & water proofing shall be excuted as per manufacturer instructions of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (c) Cost of scaffolding as per requirement of building height is included in this item.
M&L for preparation of new plastered surfaces applying two coats of cement base paint over a coat primer complete all as specified and directed.
M&L for MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed . (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed
M&L for PCC M10 grade (Nominal mix) using 20mm graded stone agg as in hold fast etc. complete all as specified & directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 25mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed.
M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified nd directed
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S & F Butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed
S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm complete fixed with stainless steel wire staples all as specified and directed.
M & L for 50 mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base complete all as specified and as directed by the Engineer-in-Charge
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
M & L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
S&F harrison rails of anodised aluminium alloy with fixing brackets, stops, rollers etc.complete all as specified and directed.
S&F PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.
S & F15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing (ISI Marked) 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S & F 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F 15mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints andr laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends door type complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) reducers complete all as specified and directed.
S&F PVC (SWR) vent cowl of dia 75 mm complete all as directed and directed.
Cutting into existing manholes for connecting new drains for pipe of 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in M-15 grade (Nominal mic) using 20mm graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed.
S&F 15 mm dia pillar taps, ISI marked, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes and fixed complete all as specified and directed.
S & F wash basin, vitreous china (flat back or angle back type), white, 450 x 300 mm size, white, including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F stop valves, ISI marked, 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or unions complete all as specified and directed.
S&F in vitreous china squatting pan “Orissa pattern of size 580x440mm white, back inlet and integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed.
M & L for PCC M-15 grade (Nominal mix) using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
S& F aluminium anodised sliding window, 3 track system, fully glazed fitted with one side visible glass of 5.5mm thick, shutter frame size 44 x 24 x 1.8mm including chowkat of size 80 x 40 x 1.8mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50mm dia and aparture 1.18mm) with three track , including aluminium grill on out side throughout & providing necessary jointing cleats ,glazing clips,rubber packing, anodised aluminium snap beading,handle,screw complete all as specified and as directed.
M & L for precast cement concrete1:3:6 type C1 (using 20 mm graded stone aggregate) in coverslabs (for drain, manhole etc)with plain fair face including chamfers , weatherings, throating etc and similar work set in CM 1:4 including with formwork all as speicified and directed
S&F in repair vitreous China urinals, half stall type, white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.
S&F 32mm dia Waste coupling of PTMT (half or full threaded)suitable for urinals complete all as specifed and directed. (Minimum weight 45gms)
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Grade E-165) quality-A complete all as specified and as directed.
M & L for 18/19 mm thick Block boards, grade 2 quality, interior grade,comercial type as in cupboard with decorative face veneer on both faces fixed with screw timber frame work as in cupboard and kitchen cabinet etc all as specified and directed
M & L for 12 mm thick Block boards, grade 2 quality, interior grade,comercial type with decorative face veneer on both faces fixed with screw timber frame work all as specified and directed
S&F 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including 15mm thick in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Material and labour for loose filling with broken brick bats of gauge 80 to 150mm in soakage pit complete all as specified and directed
M & L for concrete bed to drain pipes 100mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete( 1:3:6) type C2 complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
M&L for 3mm thick birla wall care putty new or old plastered surface of wall including with prepration of plastered surface complete all as specified and directed
S & F 1.25 mm thick and 150 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light/fan point controlled by one, one way switch
One celling / exhaust fan point controlled by one, one way switch.complete all as specified and directed.
One socket outlet 5 Amps 5 pin on independent board complete all as specified and directed.
One socket outlet 5 Amps 5 pin on same board with other switches complete all as specified and directed.
All as per item No. 97 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular white cover with frame for fixing of 12 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 8 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 3 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 2 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 1 module complete all as specified and directed.
S&F blank spacer plate for single module complete all as specified and directed.
S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as specified and directed.
S&F ultra bright LED polycarbonate tublight 20W, 1213mm long with very high efficacy suited for installation T8 tublight with G13 lamp holders, complete with all accessories complete all as specified and directed.
S&F ceiling fans 1200 mm sweep, 240 Volts, 50HZ, 3 blade with standard super silent motor including provision of 3 core flexible copper conductor cable of size 23/0.19 from ceiling rose to ceiling complete fixing arragement etc complete all as specified and directed.
S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed.
S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Endura Pearl Cat No. ENDURAPEARLSL20WLED757SASYTOPC or equivalent in Bajaj/Philips/Crompton)
S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all specified and as directed.
S&F Sheet metal enclousre(for DB's when MCB to be used) single pole and neutral double door with rated bus bar 200 Amps, 4way, 240 Volts without MCB complete all as specified and directed.(Make:-Indoasian/Legrand/Havelles/Scheneider)
M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one 10W LED complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)
M/S N JADUMANI SINGH
RK Enterprises
M/S BIJOYA LAXMI ENTERPRISE
M/S PRADEEP CONSTRUCTION
SHARMA ENTERPRISE
APPLE CONSTRUCTION
M/S Satish Chand Agarwal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .