Repair works to BUDA Quarters & Office Belagavi

Repair works to BUDA Quarters & Office Belagavi

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Foundation, Sub structure(BGM PWD SR 2021/22 V II as per corrigendum 3 sr no. 1.B all other types)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in allshapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) incl...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing and fixing precoated galvanised steel sheet roofing accessories

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per

IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, lai...

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10

kg of hardener and 0.20 kg of resin per kg), includi...

Providing and fixing Structural Steel work in single section, fixed

with or without connecting plate, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel prim...

Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float

glass both side, having 12 mm air gap, including providi...

Providing and fixing G.I. inlet connection for flush pipe connecting with

W.C. pan item .no.14.22 p.no.135 vol 2 2023-24

Providing and fixing Bib cock with wall flange made of Stainless steel with

all concealed fitting arrangements & all necessary accesories complete

a Economy item no.item no.14.55.a p.no.139 vo...

Providing and fixing Angle cock medium with wall flange made of Stainless

steel with all concealed fitting arrangements & all necessary accesories

complete - Class item no.item no.14.53.b p.no.139 vol...

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 600X850 mm internal

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP...

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete 25mm item no.Vol 2 Item n 13.6.3 p.no.118 vol 2 2023-24

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriag...

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Providing & fixing fly proof wire gauze to windows, clerestory

windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm

Providing flooring with 25mm thick polished Cuddapah slabs using cement

mortar 1:6, 25mm thick over existing cement concrete bed or top of roof

laid to line and level and jointed with cement slurry mi...

Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct...

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge SS Handles 200mm item no. 22.15 .b Vol 2 p.no.218 2023-24

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 200mm item no. 22.15.3 .b Vol 2 p.no.218 2023-24

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge SS tower bolt 250x10mm item no. 22.15.7 .b Vol 2 p.no.219 2023-24

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge SS hinges 100 mm item no. 22.15.9 .b Vol 2 p.no.219 2023-24

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge SS hinges 100 mm item no. 22.15.10 .b Vol 2 p.no.219 2023-24

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

IS:13983 with C.I. brackets and stainless steel plug 40 mm, including

painting of fittings and brackets, cutting and making go...

Providing and fixing Single lever wall mixer with L shaped Tubular bend

set for overhead shower made of Stainless steel with all concealed fitting

arrangements & all necessary accesories complete - Cl...

Providing and fixing Single flow hand showers with Anti lime jets with

Rain, Mist & Massage settings having 1.5m Extendable flexible tube and

holder & wall flange made of Stainless steel with all conc...

Rosa Rubiginosa

Madagascar Periwinkle

Polka Dot Plant

Costus Woodsonii

Pseuderanthemum

Tecomaria Capensiis

Cost of Tree Plants: Mimosaefolia

Spathodea Companulata

Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm clc fixed to the bottom and ceiling, the partition shall be skinned ...

Providing, fabricating alluminuim sections horizontaly and vertically and fixing chinawood pannel or plastic ceiling and wall pannel using PVC sheets with necessary fixtures (MR)

Polishing in high gloss/matt finish melamine clear polish on wood work

in required color/wooden shade texture with following process in the

sequence as detailed below:

1. The surface to be polished is...

supplying and fixing 2mm thick pvc flooring with all necessary liquid and material.as per incharge(MR)

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :Two coats on new

work over an under coat of suitable shade with ordinary pai...

Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including one coat ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Extra for plastering: Spherical ceiling including cost of material, labour,

scaffolding etc as per specifications and as per directions of the Engineerin-

Charge.page no.43 item no.8.15 vol 2 2023-24

Providing and supplying Single size 6ft x 2.5ft Soft PU foam 5 inch

thick mattress of reputed make with better enhanced air circulation &

breathability & sleeping comfort of size as per direction of e...

Providing & supplying 100% Polyester machine wash capable Blanket

66x90inches with calm and light colors as per direction of Engineer in

charge of work item no.22.33 page no.220 vol 2 2023-24

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling

up to a height of 5 m above floor level, over first class kail wood strips 25x6

mm with 10 mm gap in between and reinforced w...

AC Motherboard change /replace

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under

and around the column pits, walls, trenches, basement excavation, to...

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm … Etc as required..

Supplying heavy gauge PVC conduit pipe ......mm dia..........mm thick confirming to IS2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the sl...

Supplying heavy gauge PVC conduit pipe ......mm dia..........mm thick confirming to IS2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the sl...

Supplying heavy gauge PVC Conduit Pipe ....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing or J hooks and cem...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and flush mounting powder coated / galvanized metal box suitable formounting modular switch plates.The box should be firmly flush mounted after due groove cuttingin Brick/Stone/C.C wall. -

Supplying and flush mounting powder coated / galvanized metal box suitable formounting modular switch plates.The box should be firmly flush mounted after due groove cuttingin Brick/Stone/C.C wall. -

Supplying and fixing superior qualitymodular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing me...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293..

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293..

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293..

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293..

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293..

Supplying of recessmounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degre...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase...

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230V, 50cycles. Single phaseAC supply conforming to ISS-374-1979 and with double ball bearing...

Fixing one exhaust fan after making a suitable notch in the wall and finishingwith cement mortar and colouring to match the existing wall orbrackets, with bolt sand nuts and a5A, ceiling rose with suf...

Supplying &fixingof retrofit type LEDbulb ......Wwith OPAL acrylicdiffuser comprising ofLED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per W, life25000burning hour sand Compliance toIS1...

Fixingall types and all capacities of fluorescent /falseceiling/spot light /CFL/LED fittings indoor on thewall/ ceiling / rafters /girders using 23/0.0076" twin twisted PVC insulated wires, required N...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...