PROVISION OF TOILET NEAR BUILDING NO XXXVI 10-H AT GE NAVY UNDER GE NAVY CHENNAI

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide, and not exceeding 1.5M in depth for foundation etc and geeting out in soft / loose soil all as specified

Returning filling-in including spreading, levelling, watering and well ramming in layers not exceeding 25cm using approved excavated soil all as directed.

Removing excavated spoil to a distance exceeding 250 Mtrs but not exceedng 500m and depositing where directed at a level n.exc 1.5m above the starting point all as specified.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation all as specified

M&L for Pre-cast cement concrete block masonry Type C1 :3:6 (20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar, complete, built in cement mortar 1:6 all as specified

M&L for 15mm thk rendering on brick / concrete surfaces, in cement mortar 1:6 and finished even and smooth without using extra cement all as specified

M & L for 15mm thick rendering in cement mortar 1:4 on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for PCC type E-2 (1:5:10) (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc. complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring and finishing the surface even and smooth without using extra cement complete all as specified directed.

M&L PCC (1 : 3 : 6) type C2, 75 mm thick ( by using 40mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement with necessary expension joints at every three metre or change of directiion complete all as specified & directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed or bedding layer of cement mortar (1:6 ) for laying floor finishes all as specified and directed .

M&L Glazed coloured ceramic tiles in vertical surfaces 450mm x 300 mm x 7 mm thick (pattern/digital tiles) set and jointed in neat cement slurry and pointed in white or colour cement to match over plastering 10mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) to receive wall finishes as specified and directed ..

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing.

S& F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., omplete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of grade Fe 410 -W (Gde- E- 250) quality- A

S&F 35 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supply & fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S&F 300 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed

S& F 20mm dia.PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed

S&F Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.

S&F conclead type Stop valves angle, facy type , screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S & F stop valves / angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F Chromium plated bib tap Chromium plated fancy type long body screwed down for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F CP brass Health Faucet with flexible pipe 1.00 m tube and hook fixed for EWC suitable for 15mm bore of pipe etc complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern) white including fixing bolts incl white seat cover etc complete all as specified and directed.

S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S & F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT Float valve complete all as specified.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws

S & F fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.

S&F PTMT grating doom 100/125mm dia with or without waste hole etc complete all as specified and directed.

M&L of 75 mm dia. Cast iron floor trap, with grating including jointingto waste pipe fixed in cement concrete type B-1 (1:2:4) complete.all as specified and directed .

S & F PVC ( SWR ) pipe 75 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.

S & F PVC ( SWR ) pipe 110 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.

M & L PVC ( SWR ) vent cowl 75 mm complete all as specified and directed.

S & F PVC ( SWR ) bend 75 mm complete all as specified and directed.

S & F PVC ( SWR ) bend 110 mm complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed.

S & F for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F 20mm bore outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings or laid in trench or in floors etc.

S&F 16mm bore outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings or laid in trench or in floors etc.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of primer etc complete all as specified and as directed.

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane upto 12.00 mtr height all as spd and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors all as spd and directed.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

M & L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

S & F tubular towel rail 20 mm dia D type brass chrormium plated 600 mm long between flanges complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper white or any tint over a coat of chalk whitening complete over prepared surface of 1mm thick wall care putty complete as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Supply and laying in trenches steel water tubing galvanised, medium grade, with all fittings and connections of 25mm bore sizes complete all as specified and directed

Supply and fix 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fix, complete all as specified and directed.

Supply and fix, gun metal gate valve(ISI), marked with iron wheel head, screwed both end for iron pipe,suitable for 25mm bore of pipes, complete all as specified and directed.

M&L for Cutting existing steel tubing of 25mm to 32mm dia for alterations or additions (Each cut measured) complete all as specified and directed.

M&L for Screwing existing steel tubing of 50mm for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

M & L for sub main wiring complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

M & L for point wiring concealed in walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for One light point controlled by one switch complete all as specified and as directed.

All as per item No 68 here in before but for One exhaust fan point controlled by one switch.

All as per item No 68 here in before but for One switch socket outlet modular type 3 pin 6 amp on same board.

S & F Switch modular type, single pole one way 6 Amps all as specified and as directed.

S & F socket modular type 6 Amps,240 volts all as specified and as directed.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

S & F for Modular white cover plate with frame,3 Module

S & F for Modular white cover plate with frame,6 Module

S & F for Modular white cover plate with frame,8 Module

S & F for Modular Metal flush box,3 Module

S & F for Modular Metal flush box,6 Module

S & F for Modular Metal flush box,8 Module

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire all as specified and as directed.

Please Enable Macros to View BoQ information