REPAIR/PAINTING/POLISHING TO WOODEN/STEEL FURNITURE AT OTM (ADM BLOCK AND SQNS) AT KHADAKWASLA STATION

Amount

Almirah Steel med (FD 67/1032) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL)

(b) Handle 100 mm size chromium plated all as specified and as directed

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(d) Supply and fix leg made of 20guage thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(e)Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps all as specified and as directed

(f) Supply and fix door shutters made of 20 guage thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock-LICO/Tulsi/VRL)

(g) Supply and fix shelves made of 20 guage thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(h) M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends complete all as specified and as directed.

Almirah steel large (FD-67/1031) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL)

(b) Handle 100 mm size chromium plated all as specified and as directed

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(d)Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps all as specified and as directed

(e) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(f) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing Make of Lock-LICO/Tulsi/VRL)

(g) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(h) M&L Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed.

Table serving marble top (1520 x 850 x910mm) (TP) (a) Removing old u/s top of table and S&F new top made out of 18 mm thick BWR plywood covered with .5 thick Stainless sheet all around top duly welded and grinded at corner and upto 100 mm inside back of top on all side complete all as specified and directed.

(b) M&L for Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of approved shade of approved quality complete all as specified and directed

Chair dining cadet (TP) (a) Removing old u/s seat from chair dining cadets and s/f new seats made out of moulded plywood pasted with .8mm yhic laminated sheet of approved shade all as specified and as directed..

(b) Removing old u/s back from chair dining cadets and s/f new back made out of moulded plywood pasted with .8mm yhic laminated sheet of approved shade all as specified and as directed..

(c) M&L for Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying two coat of synthetic enamel paint of black shade of approved quality all as specified and as directed..

(d) Removing old u/s shoes from legs of chair and s/f new PVC shoe as per sample all as specified and as directed.

Table Dining cadets (1670 x 750 x 760mm ) (FD-1012) S & F following components of Table dinning cadets mm steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade of size 1720 x 750 mm) including provision of 4mm thick teakwood beading all around.

© M&L for Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality.

(d) PVC shoe

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table officer/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer all as specified and as directed.

(c) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL

(d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty ofTable office Officer/Clerk Steel all as specified and as directed .

(e)Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel all as specified and as directed

(f))Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel all as specified and as directed

(g) PVC shoe

(h) M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel.

(j) M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel.

Hot Food Trolly(TP) - (a) Removal of old unsv wheels complete and fixing new wheels of 100mm X 100mm heavy duty of supreme quality as per sample with nuts and bolts all as specified and as directed. .

(b) Welding of loose/ broken stainless steel frames/bottom sheets of trolley where even required and finishing all as specified and as directed.

(c) Removal of old unsv corners SS plate of size 55mm X 55mm X 2mm thick by continuous welding all as specified and as directed. .

(d) Removal of old unsv base plate 2mm thickness of size 100mm X 100mm and and S/F new SS base plate by welding (including making 4X holes per base plate) all as specified and as directed.

(e) Removing old unsv damage stainless steel pipe and fixing new 25mm X 25mm sq pipe of thickness 1.6mm by welding all as specified and as directed. .

(f) Removing old unsv tray (SS) with new SS serving food tray of size 34 inch X 17 inch X 2mm thickness as per sample all as specified and as directed. .

(g) Polishing/ grinding of complete serving food trolley by grinder machine with chemicals all as specified and as directed. .

Table writing cadets steel (TP) S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer complete all as specified and as directed.

(b) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL

(d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty complete all as specified and as directed

(e)Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete all as specified and as directed

(g) PVC shoe

(h) M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of black /Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed .

Sofa set five seater with cushion(FD-281/ FD-373/ FD-258) (Sofa set 5/4 seater) Removing old unserviceable cushion with cover complete and S&F new cushions with tapestry cloth cover (rates of cloth not less than 350 Rs per Mtr)duly stitched with all side except one side stiched with first quality Zip for easy open /close all as specified and as directed. . . Make of cushion Sleepwell /Feather Foam / Kurlon

Cupboard steel large multipurpose for cadets (CWE/PNASK/3196) - S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL)

(b) Handle 100 mm size chromium plated all as specified and as directed

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/Tulsi/VRL)

(f) Removing old u/s Curtain rod and S/F new curtain rod made out of SS 20 mm dia incl required holder as specified and directed

(g)Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps all as directed

(h) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer all as specified and as directed.

(j)M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed.

Chair Dining Cushioned ( TP)- (a) Removing old U/S seat and S&F new Seat made out of new 75mm Cushion with approved tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam completeMake- Sleepwell/Featherfoam. Cost of tapestry cloth shall not be less than Rs 500/-per meter complete all as specified and as directed

(b)Removing old U/S back and S&F new back t made out of new 75mm Cushion with approved tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam completeMake- Sleepwell/Featherfoam. Cost of tapestry cloth shall not be less than Rs 500/-per meter complete all as specified and as directed

(c)Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Form with back / without back steel size 1220 mm (FD-78M)- (a)Removing old U/S Complete seat and S&F new seat of size 1220mm x 330 mm of 18mm thick Prelaminated MDF Board with 4mm teak wood beading on all around edgeswith heavy duty flat nut and washers as per existing drg and directed

(b)Removing old U/S Complete back and S&F new back of size 1220mm x 160mm mm of 18mm thick Prelaminated MDF Board with 4mm thick teak wood beading all around the edges with heavy duty flat nut and washers as per existing drg and directed

(c)M & L for removing of old rusted iron surfaces of Form with Back and applying with emery paper and painted with two coats of synthetic enamel paint of approved shades including 04 Nos heavy duty PVC shoes fixed with iron frame complete all as specified and as directed.

Desk 1220 mm (FD-1021)- (a)Removing old U/S Complete box and S/F new box( top,bottom,side and back) of size 1220mm x 530 mm of 18mm thick Prelaminated MDF Board as per existing drg and directed

(b) M & L for removing of old rusted iron surfaces of desk and applying with emery paper and painted with two coats of synthetic enamel paint of approved shades including 04 Nos heavy duty PVC shoes fixed with iron frame complete all as specified and as directed.

Chair writing cadets/tubuler steel w/Arms (FD-75/TP)- (a)Removing of old unserviceable seats and S&F new seats of chair tubular steel with arm duly canned with heavy duty screw/nut complete all as specified and directed .

(b)Removing of old unserviceable back and S&F new back of chair tubular steel with arm duly canned .with heavy duty screw/nut complete all as specified and directed

(c)Removing of old unserviceable handle and S&F new handle of chair tubular steel with arm with heavy duty screw complete all as specified and directed.

(d)S & F Screw with plate washer for seat & back for chair writing for cadet of Godrej (CH-07 /FD 75) as per manufacturers description complete all as specified and directed.

(e) M&L Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality complete all as specified and as directed.

Chair Verandah (FD-256) (a)Taking down old existing unserviceable cane from chair verandah and M&L for reweaving the same with new 4mm wide white plastic cane oval type best quality, in seat and back half round including removing of old paint after scrapping and applying two coats of sybnthetic ename paint white color including fixing 4 Nos PVC Shoes to the legs, complete all as shown on drawing and as directed.

(b) M&L for point welding of Chair verandah Note: One point of weld means welding to broken point alaround the pipe).

Table Bed side Steel (Hospital) - FD-157M: - (a) Removing old U/s top and S&F new top of size 600mm x 380 mm of 18 mm comm ply covered with .5 mm thick Stainless steel duly welded and grinded at corner complete all as specified and as directed..

(b) Removing old u/s Shutters and S&F new shutters as per exixting size of 1mm thick MS sheet hanged on two nos hinges as per drg duly complete all as specified and as directed

(c)Removing olds u/s bottom/Middle shelves and s/f new bottom/Midlle shelves of 1mm thich as per drg complete all as specified and as directed

(d)Removing old u/s legs and S&F new legs as per exixting size of 1mm thick MS sheet of 25 mm sqr tube of height 130 mm high duly fixed with welding as per drg duly complete all as specified and as directed

(e) M & L for removing of old rusted iron surfaces of Table bed side steelt applying with emery paper and painted with two coats of synthetic enamel paint of approved shades including 04 Nos heavy duty PVC shoes fixed with iron legs complete all as specified and as directed.

Chair Easy steel (Sketch R/TP) - (a) Removing old u/s seat and S&F new seats of size 520 mm x480 mm with four nos screw /washer made out of 12 mm plywood pasted with 25 mm thick cushion of 40 density coverd with leatherite cloth of approved shade( rate of cloth not less than 350 Rs /Mtr) on existing MS sheet and rest all as directed

(b) Removing old u/s back and S&F new backs of size 520 mm x 250 mmmm with four nos screw /washer made out of 12 mm plywood pasted with 25 mm thick cushion of 40 density coverd with leatherite cloth of approved shade( rate of cloth not less than 350 Rs /Mtr)on existing MS sheet and rest all as directed

(c)M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of black shade of approved quality complete all as specified and as directed.

TABLE DRESSING GENTS : FD-230/31 (a)Taking down carefully unserviceable top of table dressing gents & S&F table top with 18/19mm thick prelaminated MDF board exterior grade approved by GE, exposed edges shall be 4mm thick teak wood edging finish duly polished, all as per existing and fixed complete all as specified and as directed

(b)Taking down carefully unserviceable complete mirror and S&F new mirror and of size 380mm x 760mm x 5.0mm thick complete all around beeding and back made out of 6mm thicck commercial ply including 2 nos of key plate all as shown on drg, and directed

(c)Taking down carefully unserviceable back frame and S&F back frame made out of 35mm x25mm 2nd class hard wood & 6mm thick commercial ply grade BWR, type BB, all as shown on drg, and directed

(d)Taking down carefully unserviceable knob and S&F chromium plated 25mm dia, as approved of best quality.

(e)Taking down carefully unserviceable drawer and S&Fnew drawer of table dressing gents made out of prelaminated MDF board as per existing/drawing complete all as specified and directed.

(f)Taking out sagged and loose dressing table gents from wall and re-fix the same properly to wall with all accessories such as screw,clips, plugs, clamps, etc complete all as directed

Bed Cadet Steel(TP) : (a) Removing old u/s and rusted Nut and bolts and S/f new heavy duty nut bolts all as specified and directed

(b) M&L for Point Welding at varous places where welding of perforated sheet welded with frame of bed broken/cracked all as specified and directed.

(c)M&L for Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and Spray painting one coat to a uniform finish with synthetic enamel paint complete, shade all as specified and directed

Book case steel FD-1028 : (a)Removing old broken/cracked glass from book case and S/f new glass sheet 3mm thick as per drg all as specified and directed

(b)Removing old U/s lock and S/F new Lock with duplicate keys all as specified and directed (Make of Lock- LICO/Tulsi/VRL

(c)Removing old U/s handle and S/F new handle 100mm size as per sample/existing handle all as specified and directed.

(d)M&L for Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and Spray painting one coat to a uniform finish with synthetic enamel paint complete, shade as directed

PAINTING :- M&L for Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and Spray painting one coat to a uniform finish with synthetic enamel paint complete, shade complete all as specified and directed for the following:- (a)Teapoy steel (TP)

(b)Rack adjustable steel 3 tier (FD-1039)

(c)Rack adjustable steel 6 tier (FD-345/1038)

(d)Shoe rack steel cadets (TP)

Polishing :- Removing old stains and polish from old wooden furniture by using electric motor grinder and Emrik paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed for the followinjg . (a) sofa five seater.FD-281)

(b)Table computer for three person (Cadet) wooden Length-1800mm (TP)

(c)Almirah/Cupboard Med wooden (TP)

M/S JEELANI ELECTRICALS (BID ID -3470834)

Mahesh Traders (BID ID -3473616)

M/s Green Leaf Electricals (BID ID -3475468)